Ipad 4th Gen not working at all

Hi
I have an iPad 4th Generation WI-FI and I got it less than 2 years ago and now it doesn't work at all. I will explain a bit more about what happened to it in more detail below. So I was taking photos with it and after I was done I turned it off or as Apple call it "sleep", well I pressed the power button in other words like everyone does, right? Then in the evening I went to go on it and it was blank and wouldn't respond but in the morning it had about 30% battery but anyway it put it on charge using the Apple adaptor and I let it charge for like 30min but when it was charging it kept on showing the Apple logo every 20 seconds but wouldn't go past it. So when I took it off charge I tried holding the Power and Home buttons at the same time for about 20 sec and after about 3 to 4 tries it showed the restore iPad sign with the Lightning cable and the iTunes logo on top of it, so I plugged it into my computer and iTunes poped up and said something like:
iPad 4th Gen detected the device needs to be restored. (By the way my laptop is Win7 and had the latest iTunes on it) So I clicked the restore button and it said EXTRACTING SOFTWARE and after that the line stopped moving and a window came up saying: Unkown Error 4005 and 4013 and it took me to the Apple website and I did all the steps they told me to do and it didn't work and kept on saying the error thing. So I took it to an Apple store and the guy there said he waz restoring it and downloading new software for it and it ended up not workin for him either, but he told me there is nothing to do cause the 1 year warranty expired. Anyway now it doesn't show anything at all not even the restore logo, the apple logo nothing it completely blank and Ive had it on charge for like 2 hours. And I haven't dropped it or anything it doesn't have any physical damage or that. So yeah what should I do? Any suggestions will be appreciated

Hi Try this Connect USB lead to pc hold down power button on iPad  connect Lead To iPad  still  hold button down Wait to see if pc sees iPad keep button down for upto  1 Minute. If that doesn't work  make An Appointment at Apple  Store. Cheers Brian

Similar Messages

  • My ipad 4th gen not detecting any contacts for airdrop

    having trouble with my ipad 4th gen using the air drop.   When I go to  video hit share, it will not detect any contacts.  The ipad is on wi-fi, bluetooth (connected with my Mac mountain lion).  What else do i do?

    If you're trying to use AirDrop between your iPad and you're Mac, you can't. AirDrop works only iOS-to-iOS or Mac-to-Mac. If you are trying to use AirDrop between two iOS devices, perhaps this will help:
    http://support.apple.com/kb/HT5887
    Regards.

  • TS2634 iPad 4th Gen not charging with included apple 12w adapter & lightening cable.

    So I've only has this iPad since Xmas.
    It worked perfectly until a week ago when I started having charging issues with the stock accessories. 
    I plugged it in to the wall using the cable and adapter it came with and nothing. Not even the usual "Not Charging" message you may sometimes see when using an old computer's usb port.  However, if I turn it completely off while the cable is connected to the wall, It will charge just extremely slow (takes about 12-16 hours for a full charge).
    Its a 4th Gen iPad 16GB (Wifi only) with the latest software update 6.0.1
    Here are the steps I have taken thus far:
    I've tried isolating the problem using the accessories that came with the iPad (Cable and Adapter) and these steps below...
    1. Tried different adapters and lightening cables (all apple products btw). Some will give me the "Not Charging" message, but still the same issue. Every now and then the lighting bolt charge indicator will show up, but it either switches back to not charging or will still charge extremely slow (and yes I've even tried disabling all the radio toggles such as wifi, location services, bluetooth, push, etc...)
    2. Utilized the same steps listed with the accessories as above using different wall outlets
    3. Hard Reset (Sleep+Home) then plugging in cable before, during, & after boot logo.
    Haven't put it into DFU Mode yet & would like to avoid this for obvious reasons if possible.  Any other options I'm not thinking off?

    Make an appointment at your local apple store and take it in. there may be something wrong with the charging port or the software that tell it what to do. ANd that's something for the pros to deal with.
    If you didn't buy it at an Apple store you can take it back where you bought it (depending on their return policy but most places have 90 days)
    The reason I suggest that....I bought mine at Best Buy and it had charging issues. I took it into best buy (the closest apple store is over an hour away) and they simply exchanged mine for a new one. If you take it into apple, the policy is to exchange your malfunctioning one for a refurbished replacement.
    So I got a new device instead of a refurb. Not that refurbs are bad, sometimes they are better than the new ones, but I liked being able to walk out with a brand new device instead of a used one.
    Now if you bought it from Apple, then that's where you need to take it back to.

  • Ipod 4th gen not working???

    basically i met my fave band and i took videos and stuff, then hours later my ipod 4th gen wouldnt switch on, i cant reset because my home button is jammed, what do i do? i really want the videos off i

    Try:                                               
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode (which erase the iPod)
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    You may be able to recovery the some info from the restored iPod by:
    via How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html

  • Ipad 4th Gen not syncing with iTunes

    Hi everyone, as you know ios7 just came out and i upgraded my ipad. Well after i upgraded it to ios 7 my ipad is not syncing with itunes. It shows me a message that the computer is not authorized. I tried to authorize it and it shows me that its already authourized. I tried de authorizing it and re authorizing it but it still did not work. Please help me, i cannot sync my ipad! my itunes is the latest version.

    Hello Christian,
    Thank you for providing the details of the issue you are experiencing when trying to sync your iPad.  I recommend following the steps in the article below when iTunes repeatedly prompts for your authorization:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Accessory not supported by ipad - ipad2 HDMI connector will not work with ipad (4th gen)

    I am a bit frustrated with the fact that I purchased all of the adapters/connectors for my iPad 2 back in the day -  and now all are pretty much worthless with the iPad (4th gen.)
    The iPad g4 uses the new lightning connector. OK. So, I bought the updated adapter (lightning to 30 pin). HOWEVER, it does not allow the Apple HDMI connector to work... "This accessory is not supported by iPad"
    I have to buy yet ANOTHER adapter: the Lightning Digital AV Adapter, and drop $49.00???
    RIDICULOUS!

    There are only other users here.
    Let Apple know by posting at http://www.apple.com/feedback/ipad.html

  • My ipad 4th gen touch screen is not working in one area

    I had a screen replacement and now the Ipad 4th gen touch screen is not working in one area ( a strip across the middle). We tried 3 different touch screens with digitizer...any ideas?

    Since Apple doesn't replace screens, they replace the iPad, I presume you had your screen replaced by an unauthorized service provider or perhaps you replaced it yourself. That voids the warranty and the ability to get assistance from Apple. If someone else replaced your screen take it back to them and demand the correct the problem.

  • I have iPad 4th gen but my iMessage is not working

    I have iPad 4th gen I was trying to send message but it's not working
    It says not delivered and number is on red

    http://support.apple.com/kb/TS1827

  • Ipad 4th gen headphone jack not working properly

    Any ideas on this ?
    Every time I put put my headphone jack in all I could hear is hiss sounds and when I try to maximize the volume I could hear the music but its too loud for me .
    If I try to move my ipad 4th gen in stand it goes back normal , if I put it down or any other position I want to try it starts to give weird sounds again . ( plugged headphones )
    It's my first time buying a tablet so I have little information about tablets and how to solve this .
    Is it hardware or software issues or dust , it's been a week and half since I bought the ipad .
    I'm quite satisfied with the buy but if it won't work well I guess I'm gonna be having a :( face .

    Thanks so much for this post!
    I got a lot of fluff out of my 1st gen ipod Touch's headphone jack. The audio would be fine if I used my Apple headphones (but they have completely fallen apart, 3rd replacement set from Apple) but with third party headphones I had the same problem as you described.

  • Guys pls help!!! My ipad 4th gen with wifi is heating up. It's very hot not that hot but normal in all sides of the back of the ipad. WHAT SHOULD I DO????!!!! PLS HELP???!!!!!

    GUYS PLS HELP!!! MY IPAD 4th GEN WITH WIFI IS HEATING UP. IT'S VERY HOT NOT THAT HOT BUT NORMAL LIKE ONE HALF TO HOTTTER. WHAT SHOULD I DO????!!!!!! PLS HELP GUYS!!!

    I use my iPad 4 without a sleeve/case only a sticker on the back. Not hot at all.

  • Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Automatic Rotation Not Working On iPad 4th Gen iOS 8.1.2

    So I recently got an iPad 4 and the automatic rotation is not working at all. I have done every troubleshooting possible including a restore of 8.1.1 and then upgrading to 8.1.2 hoping it would fix the problem and still nothing. Obviously rotation lock is off and I have tried toggling it back and forth through control panel and side switch along with doing multiple hard resets and it just won't automatically rotate at all.
    I know my sensor isn't broken because if I change position with the device off and turn it back on it will display the correct orientation, but only if I turn the screen off. Games and other apps that use the gyroscope/accelerometer work fine, yet somehow my automatic rotation function is just broken.
    Is anyone else experiencing this same issue? Since I know my sensor isn't broken I just don't understand why this is happening since it doesn't seem like a common problem after trying to find information on the topic.

    Try reset iPad.
    Hold the Sleep/Wake and Home button down until you see the Apple Logo.

  • Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrintin​g

    Hi,
    I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
    Ipad(4th gen) cannot connect to printer for AirPrinting.
    Wireless Direct is set on in the printer.
    When I choose to connect to printers own wifi network with my Ipad, it can't connect.
    (Ipad doesn't show the wifi symbol on top left corner.)
    And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
    I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
    Device Configuration show this:
    Installed Personalities and Options
    PCL6           (20040201)
    AirPrint
    PCL              (20040201)
    PDF              (20040201)
    PS                 (20040201)
    I wonder why AirPrint has empty value? (what ever this  might mean)
    Br,
    Heikki

    Hi,
    Thank you for your reply and first action plan to find a quick fix.
    Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
    Same problem also when I try to print so that both Ipad and printer are  connected to my home WLAN/DSL-router.
    I don't see any problems for the printer to connect my home WLAN,  both printer and Ipad has received an IP address from the WLAN router.
    My router model is Zyxel AMG1202-T10B.
    Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
    I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
    Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
    Here is the network settings from HP Device Toolbox:
    Network Summary
    TCP/IP(v4)
    Status (Wireless) Ready
    IPv4 Address: 192.168.1.38
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
    DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
    WINS Server: 192.168.1.1
    Preferred DNS Address: 192.168.1.1
    Alternate DNS Address: 0.0.0.0
    TCP/IP(v6)
    Status: Disabled
    Network Identification
    Host Name: NPI08C7AB
    Domain Name (IPv4/IPv6):
    Domain Name (IPv6 only):
    Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
    Bonjour Domain Name: NPI08C7AB.local.
    Bonjour Highest Priority Service: IPP Printing
    Wired Network Configuration
    Status: Not Connected
    Hardware Address: 2c:44:fd:08:c7:ab
    Link Speed and Duplex Negotiation: Automatic
    Auto Crossover: Enabled
    Wireless Network Configuration
    Status: Connected Wireless: On
    Network Name (SSID): Galactica
    Communication Mode: Infrastructure
    Authentication Type: wpa-psk Encryption: tkip+aes
    Hardware Address: bc:85:56:ee:02:d3
    Access Point Hardware Address: 28:28:5d:7c:23:a0
    Channel: 10
    Signal Strength: Excellent
    Wireless Direct Setup
    Status Enabled
    Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
    Direct Printing Channel 10
    IP Address 192.168.223.1
    SNMP
    Status: Read-Write Access Enabled
    SNMP Version: 1
    Set Community Name: Not Specified (Defaults to 'public')
    Get Community Name: Not Specified (Defaults to 'public')
    Network Statistics
    Total Packets Received: 428
    Unicast Packets Received: 414
    Bad Packets Received: 0
    Framing Errors Received: 0
    Total Packets Transmitted: 493
    Unsendable Packets: 10
    Transmit Collisions: 0
    Transmit Late Collisions: 0
    WS-Print Users: 0
    Enabled Features
    IPv4: Enabled
    IPv6: Disabled
    DHCPv6: Enabled
    LPD Printing: Enabled
    Bonjour: Enabled
    SLP: Enabled
    WS-Discovery: Enabled
    SNMP: Enabled
    Show IP Address: Enabled
    LLMNR: Enabled
    Security PJL Security: Disabled
    Please let me know if you need any other additional information.
    Br,
    Heikki

  • How long does an iPad 4th gen last for not battery I mean in Years

    Hi .......ok so I got an iPad 4th Gen 16gb in New York last year (February 2013) and I was just wondering how long this will last, not in Battery life but in how long I can use it until it starts to get really slow and lagging and goes completely dead in years! I use my iPad regularly  maybe 4-5 hrs a day (average, sometimes more in a day and sometimes less) so can anyone help me how many years will I have my iPad before I will need a new one I keep my iPad in Great condition and no one uses bar me and I don't ever drop it or put anything illegal on it  so it is kept in great condition some people say that it depends on the size in GB on the iPad I have a 16GB white. Can anyone help me how long should I have my iPad for? Ohhh ya my iPad is running iOS 7.0.3 Thank You

    No.  Once sn iOS version comes out that is not compatible with your hardware, you cannot, obviously, update iOS any longer.  However, your iPad running the last release of iOS compatible with it will continue to run that iOS release at the same speed it always did.
    Nothing about any computer ever slows down with age - your cpu, RAM and storage all function at the same speed as they always did.  New software may add features that tax your system more than a newer system would be taxed, but nothing about your system changes just because the device ages.
    At some point, our system simply is unable to update or run newer software because that newer or updated software requires hardware features that yours simply does not have.  But your exisiting software on your existing hardware will continue to run just as it always has.
    As to when your system becomse unable to handle new software or iOS features, that is purely a matter of how quickly newer hardware comes out and how quickly software developers move to new features that your system cannot handle.
    There is no inherent reason to believe that an iPad 4 will not be compatible with the next release of iOS - it might not be, but it may very well be.  Depends entirely on what changes the next release (whenever that may be) introduces, and what new device hardware Apple may be working on.

  • Recently updated ipad (4th gen) to 8.1 and iCloud not syncing Contacts, Notes etc.

    I recently updated my iPad 4th gen to iOS 8.1 and upon setting up the iCloud, I've found that myiCloud data is not getting updated in my iPad. I o not see my contacts, notes safari bookmarks etc. I signed into iCloud.com from a PC on chrome to see if i had accidentally deleted the stuff, but it's all there. It was working fine when i was on ios 7.0.6.  I also have an iphone 5s running ios 7.0.6 on which the icloud runs very fine. i make changes on my phone and they are reflected on the browser in my pc (eg: notes edit on the iphone 5s shows a change in my browser on pc, also changes done using browser show in my iphone, but not iPad). I have tried restoring my  ipad to a clean ios 8.1, switched on and off the icloud options, signed out signed in, restarted, but nothing seems to work. My contacts, notes are empty.

    Try reset iPad.
    Hold the Sleep/Wake and Home button down until you see the Apple Logo.

Maybe you are looking for