IPad 5 won't charge after ios 7 upgrade

iPad recognizes charger but does not charge.  Never had an issue before ios 7 upgrade.  Is this something I will have to take in to have repaired or is there a simple solution?

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

  • My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

    My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

    It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

  • Ipad won't charge after upgrade to 7.1.2

    Apple recommened install update.  After the update started having problem battery won't charge.  I took it to the apple store last July 13 they did hard reset it work for one day and went back to the same problem won't charge.  Please help

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good. If your computer/iTunes does not recognize the iPad, then the cable is probably bad.
    Try this first -  Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    Poor battery life after installing iOS 7.1? Try these simple tips
    http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Charging Tip - Switching to airplane mode turns off battery-draining wireless and cellular access, allowing your iPhone/iPad to recharge up to twice as fast.
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Ipad 2 won't charge after ios 7.0.3 update

    After the ios 7.0.3 update, I had to restore my ipad2. Now, it won't charge. I have tried different plugs and outlets. I have also reset it and restored it, again. Nothing worked. Has anyone had this problem and any luck fixing it?

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My iPad 4 Won't Charge after iOS 7.0.3 "Upgrade"

    After upgrading operating system as requested by Apple, my iPad will no longer charge. It won't charge from USB, it won't charge from Apple branded wall mounted charger and it won't charge from either source with one of two Apple branded sync cables I have tried. Both the cables and both sources of power work fine with my iPod Classic.
    The iPad now has no power at all, so no form of two button re-set will work.
    I have to say I am a REALLY disappointed customer.

    Hi,
    From what you have said two things may have happened:
    1) There is a glitch in iOS 7 meaning it does not recognise any chargers.
    2) During the upgrade progress, the internal battery or the internal charger broke in your iPad.
    Hope this helps!

  • HT4060 iPad 2 not charging after iOS 7 update

    Hello all,
    After updating to the new iOS my ipad is not charging at all... I did atatch it to a phillips dock and noticed that it did not charge for some reason, then I tried it's own cable and no luck.
    Now I tried to charge it though my MacBook usb cable and all I am getting is the red line on the battery sign but does not seem as it is charging....
    Any tips on how to fix this?? I recently read that with the new iOS Apple is blocking fake cables and I am worried that the dock had something to do with it?
    I am absolutelly sure it's cos of the new iOS unfortunately I dont have enough batterry to install an upgrade and hope that would fix it, I am always on 1-2%.
    Thanks for all your thoughts and comments you might have!

    Tap Settings > General > Reset > Reset All Settings
    Then see if the battery will charge.
    For charging to a wall outlet, only use the power adapter and cable that can with your iPad.

  • AP350 won't boot after IOS upgrade

    I have an AP350 and after I upgraded the IOS to 12.2.15-JA it won't boot. In monitor mode it tells me there are no bootable images available. I see the new image there. I was having issues with the authentication on this box. This was the reason to upgrade the box to begin with. Now I have more problems here. If anyone can help please I could use it. The old directory where 12.2.13-JA1 was in is not there and the new image is not in a directory either if that helps.

    Please read the attachment. It shows you how to recover IOS from bootstrap. Specifically, please go to "Using the MODE button" in "Reloading the Access Point Image"
    As a side note, you cannot use HTTP interface to upgrade IOS software starting 12.2(15)JA. Below is from release notes:
    TFTP Required to Upgrade 1200 Series Access Points to this Release
    Software upgrades fail when you use the web-browser interface to install Cisco IOS Release 12.2(15)JA on 1200 series access points. The image size exceeds the access point's 4-MB restriction for software upgrades. Use TFTP to upgrade your 1200 series access point to this release. For complete instructions on using TFTP to upgrade access point software, see the "Working with Software Images" section on page 20-18 in the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.

  • IPad won't charge after (failed) iOS 5 upgrade

    Hi,
    The upgrade to iOS 5 on my iPad failed during the back up stage.
    Now the iPad will not not 'hold a charge'.
    When plugged into either the iMac or wall charger, by a number of different cords, it starts, the apple logo displays, the home screen shows for a brief instant, and it shuts down again, indicating that there is no charge. After a few minutes, it builds up a charge, restarts, and then quits again.
    I have been successful it starting it in 'restore mode', and it is recognised in iTunes and can be restored. However, the lack of charge problem returns when it is restarted.
    Upgrading iPhones and an iPad2 have been previously successful.
    Has anyone else experienced this? It seems to much of a coincidence that a battery problem developed during the upgrade process.
    Thanks.

    Same issue here. I have 2 ipads killed by IOS7.

  • HT4623 why won't my ipad won't charge after installing ios 7?

    just installed ios7 and cannot charge or reset my ipad 2.  Any ideas?

    Same issue here. I have 2 ipads killed by IOS7.

  • Ipad 2 won't charge after IOS 7 Update

    Tried everything under the sun.  Using an authorized Apple charger, reset to default, you name it...
    THIS IS NOT COINCIDENTAL
    People everywhere are all experiencing this same issue due to the IOS 7 update.
    I am an avid user and huge Apple advocate, but this is really leaving a bad taste in my mouth, and I'm not alone.
    Apple MUST do something about this.  Release a fix or make good on it.  The world is watching and so far, APPLE IS FAILING.
    Steve Jobs would never let this happen and treat loyal customers this way.  Make it right or risk losing the good standing that built this company.

    Tried everything under the sun.  Using an authorized Apple charger, reset to default, you name it...
    THIS IS NOT COINCIDENTAL
    People everywhere are all experiencing this same issue due to the IOS 7 update.
    I am an avid user and huge Apple advocate, but this is really leaving a bad taste in my mouth, and I'm not alone.
    Apple MUST do something about this.  Release a fix or make good on it.  The world is watching and so far, APPLE IS FAILING.
    Steve Jobs would never let this happen and treat loyal customers this way.  Make it right or risk losing the good standing that built this company.

  • IPad won't start after iOS7 upgrade and reset

    Hi,
    I have just tried to upgrade to iOS7 through WiFi. No luck. So I upgraded via iTunes. When it finally was finished, I tried to turn on my iPad, but it wouldn't. It gets stuck at the Apple logo with a loading bar just under it. I did a full reset on iTunes and I can only get to the loading bar (which won't load).. Any suggestions?

    I was experiencing the same thing.  This article worked for me, hopefully it will help you.
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    Hold both the home button and the wake/suspend button down at the same time. You should see the Apple logo appear on your screen after holding these buttons down a couple of seconds, which means your iPad is booting up and should be good to go in a few more seconds.

  • IPad won't restore after iOS 7.1.2

    Finally downloaded the 7.1.2 update but I wish I hadn't. After downloading on my iPad 3, I got the "connect to iTunes screen." Once there, iTunes says my ipad is in recovery mode and i need to download a(nother) software update. 45 minutes later, after downloading the entire file, I get a file corrupter err 1403 message. I tried again. 45 minutes later, the same result. i turned off my firewall. same thing. Apple wants to charge me $20 to chat with a service tech (after THEIR update fried my iPad). Any help from someone NOT affiliated with Apple would be appreciated.

    Hi honeyb72!
    You should try the troubleshooting steps found in the following article to help you address this issue with your iOS device not being recognized in iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Ipad 2 not charging after ios 7 update

    have tried everything, multiple attemps at restore, plugging into wall, plugging into computer, restart with plugged in, different cables(all apple), dimmed backlight, turned off find my ipad....nothing works!
    Just got off a long conversation with apple, where they had no solution but to tell me that hardware fails. Great! I had a perfectly good ipad one week ago. I update to ios 7 and it is rendered useless. What a joke!
    Any solutions would be appreciated.

    I do not know if it's iOS7 related or not. My 2 is still working. However, my first 2 was returned to best buy after the charging port on it died. So that can happen. ANd it happens with little to no warning. CHarges monday, doesn't on tuesday.
    As far as I know the issues with 'unsigned' lightning devices is just the cable, not the power brick, but there's no official word (nor do I expect one)
    Lightning cables have a little chip in them and if that chip isn't signed by Apple then your device kicks up an error but should still work.
    However since this is an iPad 2, that's not the case since 2's use 30 pin chargers, not lightning.
    Usually when a 2 doesn't charge, common troubleshooting is to swap out the charger, cable and outlet, to confirm or rule those out. Also to do the reset. (the soft reset that's holding down the sleep and home keys until it reboots). Also to look in and blow out the port in case there's some lint or such in there.
    Usually those things fixes it. If not, then it could be the port.

  • Ipad won't sync after iOS 7.03 update: Other is huge and over capacity

    When iOS7 was updated last week (7.0.3) the update went fine on my iphone 5s but was interupted on my iPad. 
    Now, when I connect the iPad via cable to my desktop Mac, it will not sync.  It connects to the iPad just fine, but the "changes" cannot be applied because it shows that the amount of data to be transfered to the 64GB iPad is "Over Capactiy by 31.37GB."  A total of 45.2GB of "Other" is indicated on the summary page in iTunes in a yellow band. 
    (A sync from the same ID, same iTunes library with the same settings, with the iPhone 5S of the same capacity (64GB) has NO trouble completing properly.  It shows only 1.62 GB of "Other."
    I have tried restoring the iPad from a previous back up. No good.
    I have tried restoring the iPad to a new, factory issued condition, set it up as if it were a new iPad and tried to sync.  No good.
    I have changed the sync setting so that NO video or audio tracks are to be synced (freeing enough space for all of the bloated, "Other" category.)  Stiill ends up stuck perpetually in Syncing iPad - Step 4 of 4 - "Waiting for changes to be applied"
    Any suggestions?
    SERIOUSLY frustrated. 

    I am having the exact same issue except with the iPhone 4s.
    "Other" shows 34.88GB
    I tried everything you did, short of factory reset, since I read elsewhere that won't work.
    iOS 7.0.3
    iPhone 4s 64GB
    Help!

  • IPad will not charge after IOS 7 update unless the brightness is dimmed,..Why?

    I recently updated my 4th gen IPad 64Gb to ios7. Previous to the update I loved my iPad and it worked flawlessly. Since updating the iPad now will not charge unless I dim the brightness of the screen, and slowly when it does. Why? Is there a way to remedy this?

    I do not know if it's iOS7 related or not. My 2 is still working. However, my first 2 was returned to best buy after the charging port on it died. So that can happen. ANd it happens with little to no warning. CHarges monday, doesn't on tuesday.
    As far as I know the issues with 'unsigned' lightning devices is just the cable, not the power brick, but there's no official word (nor do I expect one)
    Lightning cables have a little chip in them and if that chip isn't signed by Apple then your device kicks up an error but should still work.
    However since this is an iPad 2, that's not the case since 2's use 30 pin chargers, not lightning.
    Usually when a 2 doesn't charge, common troubleshooting is to swap out the charger, cable and outlet, to confirm or rule those out. Also to do the reset. (the soft reset that's holding down the sleep and home keys until it reboots). Also to look in and blow out the port in case there's some lint or such in there.
    Usually those things fixes it. If not, then it could be the port.

Maybe you are looking for

  • WriteDigChan-ExtClk

    Hello, I ran the sample program C:\Users\Public\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Digital\Generate Values\Write Dig Chan-Ext Clk, but got a message as below: DAQmx Error: Requested value is not a supported value for this pro

  • How can I compress a large .mov file 19 GB

    Hi all , I need to reduce this Qucktime mov from 19GB to 8GB so it will fit on a disc, it is a HD 1920x1080 movie with audio , I need to keep the same aspect ratio, is this possible to do , which software would do the best compression ? thanks for an

  • H.264 preview problems

    Hello, I have two file compression types in my bin, photo jepg and h.264. The photo jepg will preview correctly in final cut pro but the h.264 runs at about 15fps or less. The data rate listed for the h.264 files are less then half that reported by t

  • My macbook pro doesn't restart or shut down from the apple menu. I run 10.7.5, any suggestions?

    My macbook pro doesn't restart or shut down from the apple menu. I run 10.7.5, any suggestions?

  • Failure to deploy dimension - ORA-01031: insufficient privileges?

    Hi all, 1. I imported a mdl file. 2. Then I registered all locations 3. Then I deployed all staging area objects successfully. 4. Then I deployed sequences and tables in the target module successfully. 5. However, when I want to deploy the dimensions