IPad 64GB Memory issue

My friend got a new iPad WiFi 64GB ,and it got a "Memory Problem"
The iTunes and the About in General shows his iPad only have a 1.3 Gig mem
His friend bought it for him in the US,but it's hard for him to get there,so i want 2 ask your opinion
thx every one!
http://images.weiphone.com/attachments/Day100704/209_1192781e6426b1e4ef9a88.jpg
http://images.weiphone.com/attachments/Day100704/209_1192781079c732416dff81.jpg
http://images.weiphone.com/attachments/Day100704/209_119278179345b6d51cbdc9.jpg
sorry dat the screenshot is only in Chinese,if anyone wanna get an English version,i can tell him to do so
Message was edited by: mikufan

HI and welcome to Apple Discussions...
I think you are confusing storage space with memory.
The total storage on this iPad is 64GB
iPad only have a 1.3 Gig mem
As you add more apps / video / music / books / photos, etc., that takes up storage space thus decreasing storage space.
Your image of the iTunes window where you have circled in red. That is showing how much free space is available. In this case, very little.
Carolyn

Similar Messages

IPad 1 and memory issues

I mean this thing is slooowwww. Many apps crash back to the home screen. I have an app called System and it is showing Wired: 59MB at 36.56% What is this? Apps that are automatically on my iPad? Active shows 2MB at 13.90% and I have nothing running except this app. The reason I am bringing all this up is I was wondering is there any way to speed this iPad up? I mean the memory is atrocious! This thing is slow. And it is a brand new one that I got from the Apple store. Granted, it is not an iPad 2, as I do not have unlimited wealth, as Apple assumes we all do, it is the iPad 1. Maybe the memory issue is having too many apps downloaded? I have absolutely nothing running in the background as I close every app I open because the iPad is so slow and crashes even default email back to the home screen at times! I just want to make this thing faster like the day I first got it. Right now, it is serving as a paper weight as I can't keep anything running for very long. Things run smoothly, yes, but many things do not. Still wondering what this Wired section is, as it is taking up so much of my memory. I have only 88MB free and as soon as I open any app, that diminishes rather quickly.

No it's not jailbroken. I will never do that to any of my devices. I am talking about memory. I have plenty of storage. Just tired of apps crashing back to the home screen.

How can I use same iTunes on iPad 64GB and iPhone 5 16 GB memory

How can I use same iTunes account on iPad 64GB and iPhone 5 16 GB memory

Just connect them your computer. iTunes will treat each device separately. Or if you mean iTunes Store account, you can choose what you download to each device, either directly from the iTunes Store or in synching from iTunes on your computer, as long as you don't have automatic downloads turned on.
Regards.
Forum Tip: This forum is for questions about using iPads in companies and organizations. Questions about the general use of iPads will normally best be posted in the Using iPad forum.

Some Photos Not Syncing to iPad 1, but issue is not the photos.

Some Photos Not Syncing: When syncing iPad1 64gb IOS 5.0.1 w/HP desktop, some but not all jpgs sync from a folder. (There is ample free space on the iPad.) The issue is not the photo files as I have verified that the jpg's are all compatible both through Adobe CS5 and by successfully getting the photos to sync to the iPad by making a copy of them and placing this duplicitous copy in a 2nd temporary folder, which then sync's all the jpg's to the iPad just fine. Still, it makes no sense why they won't all sync from the main photo folder.
[Folder structure is: Sync My Photos Folder; Subfolder 1 syncs all; Subfolder 2 syncs some; Subfolder 3 syncs all. But if I add a new Temp Subfolder 2a and copy non-syncing photos in it, then I am able to sync all teh photos.]
This is a very inconvenient situation, and it wastes space on my desktop harddrive as I have to have all the photos in the main folder--not the temp folder--to which they ar assinged. Has anyone else encountered this, and is there an explanation or solution for this issue?
Thanks.
jdb95

Try deleting the photo cache > iTunes: Understanding the iPod Photo Cache folder

I have a white iPad, 64GB, only wi-fi, and I have 235 apps in it, now I am trying to download more apps, but it isn't happening, so my iPad can only hold that much, help me someone.

I have a white iPad, 64GB, only wi-fi, and I have 235 apps in it, now I am trying to download more apps, but it isn't happening, so my iPad can only hold that much, help me someone.

Bit more info please. Connect to iTunes on your Pc/Mac click on your icon and confirm your memory usage in the Capacity bar at the bottom of the Summary page. Try also unticking some Apps you use less frequently in the Apps section in you iPad's pages in iTunes on your pc/mac, sync afterwards to clear them off your pad then try downloading again.
Regards,Ct

IOS memory issues & springboard app crashing

I'm having an issue with my iPhone (and a 2nd level support tech had me run a diagnostic on my iPad and he said it is happening there too). Over the last month I've reset me iPhone four times and been given a new one in an effort to fix this and I'm kind of losing faith here.
What happens with my iPhone is that the battery appears to be off to the races in an effort to get to 0 as quickly as possible. I have all but one application (OmniFocus) with background app refresh disabled. Bluetooth is turned off. Location services are enabled but nothing is using them.
When I go in to see someone at the Genius bar they tele that the Springboard app is crashing and/or I'm having memory issues on my iPhone. Both my iPhone and iPad are running iOS 8.1.2.
Does anyone have any idea why this is happening? My guess is this is a bug in iOS 8 but I'm open to whatever idea will help me resolve this.

There is no "callibration" for the home button. Anyone that tells you otherwise is as full of it as the Genius bar employee that says the button and device are working properly.
To prove it is hardware, restore the device as new. Do not install any apps. Try using the home button. Does it work consistently every time? If it does... there is an issue with an App or something in your backup. If it does not, then there is defnitively a hardware issue.
Press Apple on this to ensure the issue is resolved before your warrnaty is up. Might be as simple as having another Genuis at the Apple store evaluate the device.

Application is not working due to memory issue

Hi Friesnds,
Kindly help me regarding settings in java. Scenario is like that. I have one server having two jboss versions (jboss-4.2.3 GA and jboss- 3.2.6). Each having java memory (JVM settings) 1 GB. The total memory of that server is 3 GB.
Problem is that every two days my application is not working due to memory issue. Once i freed the memory (through run the commands - (1). sync
(2). echo 3 > /proc/sys/vm/drop_caches
Application works fine.
I heared that the above command (echo 3 > /proc/sys/vm/drop_caches) can't run frequently because of server crash.
Kindly help me regarding this issue and provide the resolution.
Let me know if you need more information from my side.
Thanks
Ashish Shukla

All of the above. I tested on 4 different networks and had no luck, I also had friends test my network and the other networks with their iPhones and all had no issues using FaceTime.
Also after I wiped my phone (erased all content and settings) I was able to successfully initiate a FaceTime call with no changes to my network and was also able to initiate another call when connected to another previously tested network that didn't work before. Once I restored from backup though, FaceTime stopped working again.
I did find this discussion: https://discussions.apple.com/thread/5163024?start=0&tstart=0
and tried the suggestions found there too. That discussion describes my issue I am having as well.

How to correct internal memory issue

This is related to the standard SAP program SAPRCKM_MR11 in which there is one include RCKM_MR11F01 which contains a select statement :
SELECT *
     INTO CORRESPONDING FIELDS OF TABLE t_bhistory
     FROM v_ckmlgrir
     WHERE bukrs EQ p_bukrs
     AND   ebeln IN r_ebeln
     AND   ebelp IN r_ebelp
     AND   lifnr IN r_lifnr
     AND   ekorg IN r_ekorg
     AND   ekgrp IN r_ekgrp
     AND   werks IN r_werks
     AND   bedat IN r_bedat
     AND   bsart IN r_bsart
     AND   bstyp IN ht_bstyp
     AND   vgabe IN ('1', '2', '3') "Wareneingang/Rechnung/Nachbel.
     AND   loekz_k NE 'L'            "Loeschkz. Bestellkopf
     AND   loekz_p NOT IN ('L', 'S') "Loeschkz. Bestellposition
     AND ( frgrl   EQ space          "Freigabe unvollständig
     OR    frgrl   IS NULL )
     AND ( memory EQ space          "Bestellung noch nicht komplett
     OR    memory IS NULL )         "falls Feld nicht initialisiert
     AND ( xwoff   EQ space          "Wertbildung offen
     OR    xwoff   IS NULL )         "falls Feld nicht initialisiert
bei Dienstleistungsbestellungen werden mehrfach kontierte
Bestell-Pos. gegen das WE/RE-Konto gebucht, deshalb dürfen
mehrfach kontierte Pos. nicht generell überlesen werden.
      AND   vrtkz   EQ space          "keine Mehrfachkontierung
     AND   wepos   EQ 'X'            "Wareneingang wird erwartet
     AND   repos   EQ 'X'            "Rechnung wird erwartet
     AND   weunb   EQ space          "Wareneingang unbewertet
     AND   stapo   EQ space.         "Item is not statistical
There is one job FMT612P which contains this standard program and the job is going to abend
because of the select statement given above which is because of some memory issue with the internal table t_bhistory, please give us a suggestion how we can avoid the same.

Hi,
I am also facing the same issue. We had copied this report into a custom report and are trying to improve performance by breaking the view into separate queries on EKKO, EKPO and EKBE.
Can someone advise the best way to deal with this view v_ckmlgrir or a best approach to break down the view into separate queries.
Thanks
Edited by: Shreyas Shrikant Kulkarni on Jun 29, 2009 4:56 PM

Memory issue with Podcast !!!

Hi,
I have several issues with the Podcast App.
- i cannot sync podcast that i have downloaded on my laptop using itunes to the iphone,
- when i download some podcast directly on the iphone, i cannot play them, i still have to stream them,
- i have uge memory issues and i think that the downloaded version of the podcast might be somewhere on the iphone, but cannot access / delete them (over 16 GO, i have more than 4.5 GO used for 'other', that are not related to anything...)
i have tried to delete / reinstall the app, but this does not change anything...
Any help ?
Rgds

Quote
I have a MSI 975X Platinum rev 2 mb with a e6300 processor overclocked to 2.24ghz.
If your CPU operates @2.24 GHz, it means that you increased FSB frequency to about 348 MHz.
To make sure there is no misunderstanding here, let me point out the following:
Memory frequency is ALWAYS linked to FSB frequency by the FSB/DRAM Ratio you can select in BIOS. If you select 1:1 for example, the BIOS will show that memory frequency is 533 MHz. This value however, only applies to the default FSB clock speed of 266 MHz:
266 MHz x 1 = 266 MHz (or 533 MHz effective DDR2-frequency).
If your system is overclocked, what counts is only FSB/DRAM ratio, not the memory speed displayed in BIOS. That means, if you set FSB/DRAM ration to 1:1 and FSB frequency to 348 MHz, your RAM will operate @:
348 MHz x 1 = 348 MHz (or 696 MHz effective DDR2-frequency).
The main question is:
What are you talking about when you say, you can't make your RAM operate @800 MHz?
The BIOS does not offer a proper divider to get your RAM to 800 MHz @348 FSB clock speed to begin with.
You have the following choices if your overclock your system:
FSB=300 + FSB/DRAM ratio = 1.33
300 MHz x 1.33 ~ 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=320 MHz + FSB/DRAM ratio = 1:1.25
320 MHz x 1.25 = 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=400 MHz + FSB/DRAM ratio = 1:1
400 MHz x 1 = 400 MHz (or 800 MHz effective DDR2-frequency)
Use CPU-Z to monitor the DRAM frequency that is actually set if you are overclocking.

Memory issues

I have a 2008 Macpro...remarkable up-to -date for its age...I plan to use it for some time yet. Lately I have been a having what seems to be a memory issue. There are 12 gig of Ram installed...6x2 gig each in pairs. Sometimes on boot the screen only shows a flashing folder. I shut down and reboot, and it seems fine...but only 8gig of ram shows installed. I opened it up, unseated the boards that hod the ram, and unseated and reset all he ram, and replaced the boards. Great, all he ram shows, 12 gig again. This morning, a few days later, it did it again, showing 8. So, when I run Crucial's memory analyzer, it shows first four slots full, last four empty. A few questions...are the first four slots the top board, the last four the bottom board? This, BTW, is what it was also showing before I reseated the ram. If so, the ram in question s on a separate board. Opinions, is the ram bad, or the board, or neither? Should I reseat again and flush with contact/tuner cleaner/degreaser? Could this hurt? (it is made to clean electronics) the machine does seem ever so slightly unstable. FCP crashed once in a 5 hour edit, which it has done before but rarely. The machine itself did not crash, just the program. Can using the machine like this do more damage, or will it just not boot? I feel it is a seating or connection issue, as I have never seen ram come and go, once it is fried it's fried. The ram is still pretty pricy, but I was going to buy 4 more gigs just to fill it out. Are the two board that hold the ram identical, top and bottom? If so, is a good diagnostic tool to swap them and see what happens? Move all the ram and swap board positions, or do I risk blowing ram ? Remember, the ram did show up when I reseated, so it seems like it is I damaged. My goal would be to see if top ram stops appearing. Does ram need to be filled in order? I know in pairs, but can I just swap the boards and leave the ram, which should look like filling slots 1,2,5,6,7,8...as opposed to 1,2,3,4,5,6. Can the boards be swapped, or are they set somehow to be 1-4 and 5-8, or is that determined automatically by their upper or lower insertion? Any other advice is appreciated. Funds are low, so I need to keep this machine running. Other info, 3.06ghz (2 quad core) Xeon CPUs, 1tb system drive, 4 TB raid5' OSX 10.6.8 dual graphics display with 512MB (can't remember card model right now). Also, can I update graphic card in this machine? I looked at it a few years ago, but the I for I found was confusing and I never got to it. I figure I might be able to get a better card pretty cheap by now. Thanks all.

You have typed a huge list of ideas all as one paragraph with many questions in it without a single bit of white space. My eyes are not good enough to read a question, attempt to answer it, then dig through the sea of letters to find the next question.
Your writing needs white space, which gives it a peculiar overall shape, and allows a reader with poor eyesight to return to a particular spot in the text. So I will attempt to answer some parts of your query, but will be forced to do so from memory of what you wrote.
The Mac Pro uses Error Correcting Code (ECC) RAM. Eight extra bits are stored with each word, and checked when read back. Single-bit errors are detected, and the check bits are used to make a correction on the fly. More complicated errors are detected, and can cause your Mac to halt on a kernel panic to prevent bad data from propagating.
ECC RAM means your Mac can detect bad memory easily at Startup, and can declare pairs of DIMMs "absent" to avoid using them.
Contact corrosion, which was an issue with much older DIMMs, is rarely an issue with these FBDIMMs. Once re-Inserted ONCE, corrosion will not recur for a year or more.
The upper and lower Riser-cards are identical.
The FBDIMMs in these machines are subject to overheating and death. If Mac OS X or any program reports DIMMs as missing, at least one of the DIMMs in that pair has died (but since they are installed in pairs, both are marked absent).

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

Firefox 3.6.8 and memory issues

After the last update to 3.6.6, I disabled plugin-container per the instructions given on the forum, and my RAM problems went away. However, after the automatic update to 3.6.8, the memory problems came back, with memory usage going up to 92%. I downgraded to 3.6.4, and turned plugin-container off again; while memory usage is currently at 84%, it is not as low as it was before the upgrade to 3.6.8. (79-80%) (There is very little difference in the websites being opened on the various tabs.)
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.8

ffs guys. It's a free browser. It's cool. We love it. But can we do something about memory issues? Almost every release has huge memory leaks.
How about halving the release points and focus on memory issues for the other half of the time. I am a long time user since way back in the day and it seems to me that instead of trying to release so many versions, we should be focused more fixing the current release.
I say put a moratorium on new features until bloat can be fixed. These experiences are starting to give me a hardon for IE again.
Screw new features. I can deal with plain old tabs like they are. I don't need more bells and whistles. This browser has been kicking ass and taking names for a loonnnggggg time. We don't need more bloat. Keep the security fixes coming but everything else can wait. Take a breath. Stop and smell the roses for a few weeks.

Regarding Memory issues((error) while scheduling the job

Hi Friends
I am facing memory issue while rerunning BODS jobs in production.As we have rapid mart when jobs got failed i rerun the
job suddenly job got failed and in logs i found Memory issue
please help me what i have to do in steps
Thanks

I think there is no one solution to buffer pool issue. Buffer pool issue happens due to many reasons like how you design the data flow, requirement of push down or even insufficient memory in the running environment.
You can check by checking 'collect statistics for optimization' during running the job. Also in the data flow, try changing from pageable cache to memory cache by right clicking and selecting properties. The below link give some details on caching, might be helpful.
https://wiki.sdn.sap.com/wiki/display/BOBJ/CachinginDI
Arun

After upgrading to iOS5,everything was restored.I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory but it doesn't appear,only songs appear.thank you..

After upgrading to iOS5 & everything was restored,I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory in the iTunes page but it doesn't appear,only songs appear on the Music.thank you in advance for your assistance..

They are now in the videos app!

How can I transfer photos from my iPad to memory stick without a computer? No internet connection.

Transferring photos from iPad to memory stick.

That's the truth.
I went shopping yesterday and bought a £25 lightning adapter to SD card for my iPad. Today I find out I cannot perform the extremely simplistic task of copying my required photos to my SD card using the adapter ...
Any other tablet or phone would do this.
I now face an uphill struggle to get these photos off of the iPad and onto an SD card before going to the camera shop to get them printed on photo paper. I am due at my terminally ill mothers house in 1hour20mins. It will take me 1 hour to drive to her town. I then need to get to the camera shop and print these pictures off - I reckon at least 30mins to park and print them. And this does not factor in the wasted time and money I have already spent this morning getting nowhere with this useless adapter. It does not factor in the time wasted now trying to get these photos off my iPad, on to a computer, then on to an SD card - then leaving the house............
I think me and Android are going to be very good friends.

IPad 64GB Memory issue

Similar Messages

Maybe you are looking for