Ipad 7.0 Music Playback-No Fullscreeen Art in Landscape?

I use my Ipad 2 in the car..dashboard mount. Docked to radio. Due to size I can't portrait this.
In IOS6 and earlier, I had no problems playing my music/playlists. Due to the way it ran, I'd
have it playing and it'd be doing the full-screen artwork.
But now, with these IOS7 stuff, it doesn't (at least from manuals and my own experiments)
have a way to do this anymore. The closest thing I get is going to "now playing"...
But here's the issue. That doesnt' fullscreen the art. The art is only half-screen height and has
the big bands for player control and name top + bottom. And of course, more blankness on the
sides of the art.
On top of that, these outside-the-art is blank/white. All this is fine if you're sitting with your face
in the Ipad... but in the car, it's a ways to the dash.. and in order to be able to "see" the artwork
I have to max the brightness. Which now means it's like a fricking light bulb...at nighttime this is
way too bright for safety in the car. At least in 6.0 and earlier...surrounding areas were dark.
But this pure white at night is just like driving with a flashlight in your face no matter what.
Is there _any_ way to get the artwork truly full-screen again??
Or to get the borders dark at least? (besides going inverted and seeing inverted color art).
I doubt so due to the way they seem to not like people to "customize" anything different than the
conforming "same look" to everyone else (oddly ironic to me since remembing original apple
advertisement for macs promoting non-conformity   )
Currently due to the danger of having brightness this way, I'm no longer able to use it in the
car (esp at night) to where I can visibly have it showing. Portrait gives bigger artwork..but
II can't do this due to too much windshield/driving view blocking. And it has a good amount
of blinding white as well...so...
Any Ideas?

These sorts of general software errors are best fixed by cleaning house and starting over.
Do a very good backup of all App data (check in setting, iCloud, storage, manage storage, all apps.  Note which apps you want saved and turn switch ON/green)
If you have very good wifi and an up to date computer:
Restore to factory then setup as new from backup you just made.
Then restore backup from iCloud

Similar Messages

  • Fluctuating audio output level during music playback on iPhone 6

    Hi,
    When playing music on my iPhone 6 the volume level of the music suddenly drops sometimes and takes ages to go back to the original level. It doesn't matter whether I'm listening to music through my headphones, or when docked to a speaker or via airplay: the problem eventually happens (usually within 5mins). I've tried a factory reset, and I've tried a settings reset but neither of them worked. All I can think of at the moment is that there is an application running in the background that is interfering with music playback. Will try each one in turn and report back. Has anyone else experienced this problem? I have three other iOS8 devices (various iPad mini models) where this problem does not occur.
    Thanks and regards, Keri
    P. S. This problem happened with iOS8 before upgrading to 8.1.2.

    "How would I know which all apps render audio?  Any shortcut to find out?"
    No shortcut. You have to see whether they play audio or not. That simple. For example, Skype does.

  • Music playback - some tracks start half way through - help?

    I have an Ipod Touch 32gb 4th gen.
    On music playback, there are certain tracks that will not start at the beginning of the track and start half way through or even towards the end of the track.
    This does not occur on playback on my 32gb classic, an 8gb nano, on laptop or on Apple TV.
    The local apple store have replaced the Touch with another and the same happens on the same songs.
    Having had the classic for nearly 4 years with no faults, I thought I'd step into 2010 and get with it a little, only to find that music playback is problematic.
    All software is up to date, I have been through restores etc. with the local Apple Store.
    Any suggestions guys?

    We are having the same issue with our iPod touches and iPad, and yes, it is very annoying. I came here searching for a solution, but all I see is you all with the same problem/question.
    I'm assuming this behavior probably has something to do with the new AirPlay in iOS and its ability to stream media to another iOS device and pick up where it left off. However, I find this extremely annoying for music, since songs start halfway through when in the middle of a playlist.
    I have found no solution to this issue, and it is one Apple needs to resolve, especially when we have "Remember Playback Position" UNchecked for all of our music.
    Here's hoping Apple puts a little more effort in the future to help us actually manage our media well, instead of crap feature bloat like Ping, Genius, etc.

  • Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

    Ok, I have deleted EVERYTHING off my 16gb ipad. Photos, music, apps. All I have are the standard apps. It says I have used 11gb and only have 1.6 left. When I first bought it I had up to 4 movies and lots of apps, no problems. What's going on please!?

    How much space is used by your Other? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • HT4913 If I sign up for iTunes Match, and then turn the iTunes Match on my iPad, will my music library from the iPad that is not currently in iCloud move to the iCloud?

    I have a large music library on my iPad, that is not currently on iCloud or on my main PC. If I sign up for iTunes Match, and then turn the iTunes Match on my iPad, will the music library from the iPad that is not currently in iCloud move to the iCloud? Or will I loose all that music?

    Welcome to the Apple Community.
    Tap the song you wish to download.

  • My ipod touch is broken and if i upgrade to ipad, will my music,photos and video files be transfered over to ipad?

    My ipod touch won't turn on and I have tried the reset button n home button a few times, it still won't work. So, I'm thinking of upgrading to Ipad but I do not want to lose my files from Ipod Touch. My question is, will all the files I have synced up to date be transfered over to the Ipad? My music, movies and photo files. Thanks

    Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements.
    It needs some charge to get anywhere at all - that is addressed in Step 3:
    Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the iPod.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the iPod in iTunes and choose "restore from backup".
    If this procedure doesn't work, you have done all you can and only Apple may be able to help. Have them look at it while you shop for your iPad

  • I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar

    I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar and syncing not happening. I have tried resetting ipad and restarting etc but still no joy. Anyone had a similar experience?

    Take it to the Apple Store for evaluation.
    Try this.
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • I have my iTunes library on my home PC, which is linked to my iPad 2 for music etc. I also have an iPhones 4S, which I would also like to pick up the music from my library, is this possible ?

    I have my iTunes library on my home PC, which is linked to my iPad 2 for music etc. I also have an iPhones 4S, which I would also like to pick up the music from my library, is this possible ?

    Hello chickenrob,
    Indeed, this can be done with Home Sharing. The article linked below details how to set it up.
    iTunes: Setting up Home Sharing on your computer
    http://support.apple.com/kb/HT4620
    Cheers,
    Allen

  • Front Row/music playback issue

    Hi all,
    I have a rather large music library in iTunes and I have my Mac Mini attached to my stereo and TV. I use Front Row for music playback. Recently, I have been having trouble as the music will "stall" randomly or "freeze" for a couple seconds, then resume playing. Very annoying.
    I've noticed that this problem does not seem to happen if I select the music from iTunes without Front Row running or if I use FR to select the music, then back out of FR with the little remote.
    Anyway, I prefer to keep FR running. I've seen LOTS of articles and posts regarding video freezing with FR, but not music. Anyone know what's wrong?
    Thanks!

    I have the same problem on my macmini. :/
    And I too like to leave Front Row playing songs while I do other thing in my house.
    It hangs in almost every song now, it never did that before. I wonder if it's this iTunes update...
    Is there someone else with the same problem, or someone that could help us solve that?

  • CK-200 poor music playback quality

    Hi, I've just installed the car kit CK-200 (ISO cable version) into my car and I'm very disappointed by the music playback quality.
    I have Nokia C7 with the latest firmware (14.002) and I have also updated the car kit firmware into 3.0.
    There's no problem with the phone call quality - I would say it is comparable to the other car kits (for example to CK-7W I've had before), but if I want to use it for playing music, it still plays it in "phone call-like" quality. I have tried different players, but no success - still the same low quality.
    If I turn the FM transmitter on and tune up the car radio to the transmitters' frequency, I get much better quality then via this car kit (although sometimes it's noisy from other broadcasting radios).
    In the product description of this CK-200 they highlight very good sound quality thanks to some DSP technology - I hope there's more than this.
    Do you have any idea what might be the problem here?

    Hi
    The CK-200 is a mono output car kit that is only designed for calls, not music.
    If a handset is playing music via the mono Bluetooth channel, this is a fluke, and not part of the design of the handset.
    The CK-100, 300, 600 are all stereo car kits with music capability.
    The DSP settings on the CK-200 manage the voice vs background noise in the car so the driver can be heard more clearly by the other caller.

  • Keynote Sync problems with music Playback

    Dear Keynote Experts,
    after long trying I can´t fix this problem.
    I want to synchronize Pictures with 4s duration. This shall run in sync with a music playback which is 120 bpm. So it would be in Sync with the progression of the beats. At least the pictures don´t run smooth in my case during the presentation. I checkes the timing with a watch the and it seems as if the single pictures move in unequal durations. Weird?
    I tried an Update of Quicktime and tested the whole thing with a new Keynote document only programmed for this syncing purpose. No success...
    Maybe help lies in the intelligent animation tool or something like this which would help, otherwise it should be no great deal, to have the Pages properly changed each 4s.
    Thanks for your help in advance.
    All the best
    Tim

    Hi Kelly,
    after a while...
    yeah I do it like this. I record the whole thing with screenflow, as Kenote does a good resolution full screen.
    I would like to export certain sections of my full grouped objects Image. I can refit it on a smaller paper size record this cutout full screen with Screenflow in high resolution, so far so good - but:
    The problem is, when I use smaller paper sizes, the whole Object gets automatically scaled and  the relations of the grouped Object are lost. Is ist possible to keep the absolute values  of the objects (1cm stays 1 cm) when I switch to different sizes of the paper.
    Thanks for your answer...
    Best wishes
    Merry Christmas

  • Can you connect and ipod nano 4/5th generation with and ipad to download music/update software

    Can you connect and ipod nano 4/5th generation with and ipad to download music/update software.
    If so how do you go about it and what equioment are you required to purchase.

    No you cannot.

  • Using iPad to Stream Music via ax.?

    Hello,
    IS IT possible to use an iPad to stream Music via my AX To speakers or my Home Stereo?

    IS IT possible to use an iPad to stream Music via my AX To speakers or my Home Stereo?
    No, at this point in time, it is not possible to stream from your iPad to an AX.
    However, it is possible to stream from an iTunes host to the iPad. (ref: Airfoil Speakers Touch)

  • Does the Iphone 3G support music playback via a bluetooth headset?

    Hi All,
    Does the Iphine 3g support music playback via a bluetooth headset at all, I suspect not...

    It's been on many a user's requested feature list since the first iPhone, and people were disappointed when it didn't show up on the 3G. The adaptor he links to will get the job done.
    I have to admit I've demoed a couple of bluetooth stereo headsets, and the music sounded awful. Perhaps it's improved, but for this reason it's not a feature I've personally wished was included.

  • Problem with iTunes Music Playback

    Hi, I like using itunes but im having a problem with the music playback. If i have just itunes running and some background programs i.e. anti-virus playback of music is fine but I want to be able to surf the web, and play my games while listening to music. However when i try to so this the sound becomes muffled, choppy and can skip and slow down all in all its impossible to listen to. I thought this may be a problem with my PC but its not a slow one. I tried Windows Media Player and while browsing the net, playing my games etc playback was perfect. Also ive done everything on this page> http://docs.info.apple.com/article.html?artnum=93610 but still had no luck. Now i will use media play if i have to much i much prefer itunes ans it has all my libary sorted out. Any help would be brilliant.
    Thanks
    Mark

    Even though you LOVE iTunes, there are many other programs out there that don't require extra software to be installed for it to function....there by freeing up your CPU to run more programs.
    I would seriously look into trying something different that doesn't need to hog so much system resources....until they reduce their program's needs.
    Try something like Winamp or Musicmatch Jukebox.
    You can have your library to show up pretty much the same way that they do in iTunes. You'll just have to read through the user guides to get it exactly the way you want it.

Maybe you are looking for

  • HP LaserJet Pro MFP M127fn - DNS issue, hundreds of UDP connections affects my router 100% CPU usage

    Hi all, We've bought about ten pieces (HP LaserJet Pro MFP M127fn), tested only one the other 9 are waiting for their time to be sent in our branch offices. The MFP works fine, no complains till later that day I noticed that our Mikrotik Router was s

  • How to get the AS3 SDK for Facebook Platform and the CS SDK to play nice?

    I tried to combine a very basic Photopshop Panel created with the CS SDK v1.5 and the AS3 Facebook SDK (http://code.google.com/p/facebook-actionscript-api/), but get the following errors when I try to login to Facebook in the Panel. Error: Error #320

  • From weblogic 6.0 to 6.1 (EJB deployment)

    Hi, We were using weblogic 6.0 for deploying EJBs on our application. Now we are migrating to 6.1. So using console on weblogic 6.1 when we try to deploy EJB which we depolyed for weblogic 6.0 application also, it deploys perfectly. But when we try t

  • How do I update my desktop app

    Ok. So I have a function 'initUpdate' [code]   public function initUpdate():void {   var appUpdater:ApplicationUpdaterUI = new ApplicationUpdaterUI();   appUpdater.addEventListener(UpdateEvent.INITIALIZED, updateInitialized);   appUpdater.addEventLis

  • Premiere pro CS4 crashes after project loads, any suggestions?

    It used to just crash and I would just open premiere back up and it would eventually load and be ok. Usually would take two tries to load. But now it is actually crashing my computer! I can get it to load after several tries, but waiting for my compu