IPAD 802.1x EAP-GTC not working

I am trying to connect to wifi enterprise 802.1x   rsa 802.11agn (WPA2,AESCCMP,PEAPv1(EAP-GTC)). 
Our setup
Trapeze_AP-M522 -> Trapeze_MX200R (7.3.4.4.0) -> Cisco ACS (5.1) -> RSA
It's working with windows pc and android (phone, tablet)  . When we use EAP-MSCHAPv2 it's working BUT I need 2 factors. 
We traced the handshake in the cisco ACS, the ipad first try MSCHAPv2 then send another packet not recongnise as a GTC and then failed.
Any help and / or a sample ICU .mobileconfig would be very apreciated.
In ICU we select WPA/Enterprise ,  protocol PEAP,  Authentication  Ask for a password with each connection.
Thanks

Im having the same issue. Have you been able to resolve it?

Similar Messages

  • 802.1x PEAPV1 (EAP-GTC) not working on Ipad/Iphone

    I am currently working on deploying 802.1x at a remote location for a University. We use Cisco WCS to query a LDAP server. Apparently the Iphones and Ipads are unable to connect using 802.1x PEAP. We have both PEAPv0(EAP-MSCHAPv2) and PEAPv1(EAP-GTC) turned on but our LDAP server only supports EAP-GTC. Does anyone know which PEAP version the Ipad/Iphone supports??  I have included output from the Iphone Configuration Utility while I tried to connect.
    Fri Sep  2 10:54:50 ********** eapolclient[150] <Notice>: peap_verify_server: server certificate not trusted, status 3 0
    Fri Sep  2 10:54:50 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:] event: 3
    Fri Sep  2 10:54:50 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: User Information required
    Fri Sep  2 10:54:55 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:] event: 1
    Fri Sep  2 10:54:55 ********** Preferences[141] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: EAPOL failure
    THANK YOU!!!

    I am having the same issue..
    Whenever i am trying to connect my iphone to a WPA2-Enterprise network, it by defaults connects through the MSCHAPv2 Auth protocol, whereas my LDAP supports only GTC auth protocol.
    But there is no option to change the encryption type when configuring a WiFi.
    Requesting to please update as to how connect to the WiFi.
    Thanks in Advance.

  • How can I transfer songs from my iPhone 4 to my new mini iPad.  My PC is not working.

    How can I transfer songs from my iPhone 4 to my new mini iPad.  My PC is not working.

    if they're songs you purchased from itunes go to the itunes store on your ipad, go to purchased, and download from there.

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • TS1741 Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

    Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

    Hi JenJen73,
    If you are having issues with AirPlay streaming from your iPad to your Apple TV, you may want to take a look at the troubleshooting steps in the following article:
    Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Cheers,
    - Brenden

  • Hi, i have Ipad 4 the mic is not working  skype account can  you tel me what i can do to get it working.

    Hi,
    i have ipad 4 the mic is not working for skype account can u tel me what i can do to get it working?

    No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
    Best of luck.

  • Since updating the recent OS on my iPad my location services do not work.  Maps "Cannot determine location"  and "Find Me" is running in circles.  How can I delete the update on my iPad???

    Since updating the recent OS on my iPad my location services do not work.  Maps "Cannot determine location"  and "Find Me" is running in circles.  How can I delete the update on my iPad???

    You can't delete the update and your problem probably is not in the Update.
    Check to see if Location Services is turned ON. (Settings > Privacy > Location Services)
    What model iPad Mini do you have? WiFi or WiFi + Cellular
    Have you recently changed WiFi routers?

  • HT2693 How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?

    How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?
    On trying to open month of March 2013 the pre-installed calendar just shuts down and closes.  Have tried restarting iPad but this didn't help and because its a pre-installed App am unable to re-install it.   Is this a universal problem or just affecting me?  Tried searching for support in both App Store and on Apple site and can't see how to report this.

    Feedback
    http://www.apple.com/feedback

  • HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

    when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?  My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not.  Any suggestions?

    Hello Nina Izurin,
    While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • My ipad safari and mail are not working. Why are they blank when I clickclick on them?

    My ipad safari and mail are not working.  Why are they blank when I

    For Safari try clearing it's cache : Settings > Safari > Clear Cache (and Clear History).
    You could also try closing the two apps completely : from the home screen (i.e. not with Safari or Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail and Safari apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • 802.1x EAP type not configured

    Hi, a simple 802.1x test with XP client sp2, 3560 with IOS 12.2(35)SE5 and ACS 4.1(1) build 23.
    EAP MD5 selected on the client and enabled on the ACS but I receive in ACS an authentication failure message, with Authen-Failure-Code "EAP type not configured".
    Any idea ?
    thank you in advance
    greatings

    You have to install a self-generated certificate on the ACS, and enabled PEAP with "Allow EAP-MSCHAPv2". then changed the setting on our PC, and manage to make it work.
    Could you do the following,
    1.) Enable full detail logging on the ACS: System Configuration -> Service
    Control -> Logging detail level = "FULL". Then restart the ACS services.
    2.) Enable "debug radius" together with the debugs that you already have
    on the switch
    3.) If there is a sniffer (Norton SnifferPro, or the freeware Wireshark or
    Ethereal) on the client laptop, please start it and enable sniffing on the
    client interface.
    4.) Make another authentication attempt.
    5.) Generate a "package.cab" on the ACS, by running Bin\CSSupport.exe
    underneath the ACS installation directory
    6.) Please send me the following information,
    a) The package.cab file,
    b) the debug output from the switch,
    c) the sniffer trace (if available).

  • EAP-TLS not working with IOS 4.1

    Hello,
    I've lot of iPhone in my enterprise,
    I've configured it putting user certificate and authenticate on the wireless network using EAP-TLS mode, choosing user certificate and give the username, and it was working.
    sometime "can't connect to network" append, but after lot of tries, it work.
    when the network is configured, it's working all the time.
    since 4.1.3, I can't configure this network, I can't approve my server radius certificate (so I succeed to authenticate from server)
    I've already tried to put my root CA certificate in iPhone, doesn't change anything (It should be trusted ! all servers certificate are from this CA)
    I've tried to preconfigure this wireless network with iphone configuration utility, not working.
    Iphone 3GS, iphone 4 since IOS 4.1.3

    Here is the dump log obtened via Iphone configuration utility, with certificate deployed but configuration manually
    Oct 14 15:40:41 unknown wifid[29] <Error>: WiFi:[340292441.191866]: Processing link event UP
    Oct 14 15:40:41 unknown kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
    Oct 14 15:40:41 unknown kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]:  lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_8021X, key = CIPHER_NONE    , 802.1X .
    Oct 14 15:40:41 unknown kernel[0] <Debug>: [6225.861292541]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
    Oct 14 15:40:41 unknown kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0befa00, BSSID = 00:15:70:e6:6d:90, rssi = -41, rate = 54 (100%), channel =  1, encryption = 0x8, ap = 1, failures =   0, age = 9, ssid[11] = "TAO_Employe"
    Oct 14 15:40:41 unknown kernel[0] <Debug>: AirPort: Link Up on en0
    Oct 14 15:40:41 unknown kernel[0] <Debug>: en0: BSSID changed to 00:15:70:e6:6d:90
    Oct 14 15:40:41 unknown eapolclient[410] <Notice>: eaptls_verify_server: server certificate not trusted, status 3 0
    Oct 14 15:40:41 unknown Preferences[101] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: User Information required
    Oct 14 15:40:41 unknown Preferences[101] <Warning>: -[APOtherNetworkController keyboardWillShow:]
    Oct 14 15:40:42 unknown kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
    Oct 14 15:40:43 unknown Preferences[101] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x278960:<VPNBundleController: 0x278960>): _serviceCount(3), serviceCount(3), toggleInRootMenu(0), RootMenuItem(1)
    Oct 14 15:40:45 unknown wifid[29] <Error>: WiFi:[340292445.893128]: Already associating, will not queue request.
    Oct 14 15:40:46 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-10-14 15:40:31 +0200. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Oct 14 15:40:51 unknown kernel[0] <Debug>: [6235.874083208]: AppleBCMWLANNetManager::handleDelayedPowerManagementTimeout(): Timed out waiting for IP address, entering powersave mode: 2

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • TS1702 On the game "pinball HD" for the Ipad the right flipper does not work on my 2 ipads

    I have two ipads one is the original that first came out and the other is an Ipad mini.  I have installed on both the piball game "pinball HD".   On both devices the right flipper on the game does not work.  Seems strange it is happening on both my devices which leads me to belive it is a software issue.  Was wondering if any one else has experianced this problem.  I would not mind so much if it is free, but it was not.  I have sent an email to the developer but so far no answer.  Is any one else experiancing this problem ??

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    You can also try a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before installing a newly downloaded copy of the Firefox installer.
    *Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Question: How to connect my iPad with iTunes since it show that in iPad screen while it is not working?

    My iPad not working and show message in the screen to connect to iTunes, So how i can connect to iTunes while it is not working is through my computer and do i need to download iTunes first?
    Thank you

    When your iPad wants to be connected to a computer with itunes, yes itunes need to be on the computer. Click here to Down Load iTunes.

Maybe you are looking for