IPad Air 2 Lock Screen

Hello, how can I lock Landscape screen on my iPad Air 2? On older iPads I always have a Lock-Screen-Hardware Button. Thanks you Thomas, SwitzerlandiPAd Air

Look here ...
http://appleinsider.com/articles/14/10/16/apples-ipad-air-2-eschews-physical-ori entation-lock-switch

Similar Messages

  • First time I planned to buy a ipad Air. After seeing ipad Air having screen problems, dropped my plan. Planning to go for samsung Note 10.1 2014 edition.

    First time in my life, I planned to buy a ipad Air. After seeing ipad Air having screen problems in the community, dropped my plan. Shall I go for for samsung Note 10.1 2014 edition otherwise wait for ipad Air 2.

    For every iPad Air with screen problems there's a million that work fine.. If you buy at the Apple Store take a good long look and hand it back if it's not right.

  • Anyone else having issues with iPad Air touch screen x y  positioning inaccuracy?

    I have a 128GB WiFi Cellular iPad Air with IOS 7.0.3 installed. I have noticed, especially with the Photos app, that where you touch on the screen isnt exactly what is returned by the iPad. For example, if I want to view a photo in a display of a series of thumbnails I have to actually touch the photo to the left of the one I want to view. If I touch the one I want to view, the one to the right expands to full screen. I am hoping this is just a software issue. If not, then this one is going to be returned while I still have time in the initial 30 day window.

    Well, I think I figured out the problem. I had a pdf file somehow loaded into the camera roll. All images before the pdf were opening appropriately, but the ones ater that file were always shifted to the right. I deleted the pdf file and now they all open correctly.

  • IPad Air home screen shaking

    I purchase an iPad Air about 4 weeks a go it has worked fine until today. When powered on the homescreen starts to shake, all other screens are fine. Does any one have a fix for this or is it a fatal flaw?

    You are most welcome

  • What happened to the battery indicator on my ipad's lock screen?

    I've noticed recently that the large green (or red, if low) battery indicator that used to appear on the lock screen when my iPad 2 was plugged in has disappeared.  I have searched in vain for a setting for this, could someone point me in the right direction?  It could have happened when I updated to iOS 5.0.1, but I am not quite sure the time matches up, and it seems like a silly change to make.  Also, my iPhone has the battery indicator, and it's also on 5.0.1.

    The issue may also be caused by the power source that you are using:
    iPad: Charging the battery
    If you don't see the white charging or plug icons, try connecting to the 10W power adapter.
    iPad: Charging the battery
    To charge your iPad battery, try one of the following:
    Connect iPad to a power outlet using the included cable and the 10W USB power adapter.
    Connect to a high-power USB 2.0 port using the included cable.

  • IPad Air Touch Screen Not Working

    I have a new iPad Air 128Gb model.  I was using it and the screen stopped responding.  I used the sleep/wake button and home button trick and it restarted, but still not responding.  The areas you are trying to touch have a box placed around them, but will not let you touch them.  For instance, when I try to put my passcode in I push the number 1 and the number has a box around it, but it does not let me activate the number 1 to unlock the iPad.  I made an appointment at Genius Bar, but I am looking for other solutions or has anyone had something similar happen?

    cptmo wrote:
    ... The areas you are trying to touch have a box placed around them, but will not let you touch them...
    You have turned on VoiceOver. You turn it off by going to Settings > General > Accessibility and turn it off there.
    To navigate in this mode, you select items by tapping once, then double-tap to activate the item, and need to scroll using THREE fingers.
    Please do not go to the trouble of restoring.
    And read the manual...

  • Ipad Air- the screen turns blue and restarts

    Lately my Ipad Air has started misbehaving. The screen all of a sudden turns blue completely and then it restarts.
    The IOS is on the latest release.
    It is not dependent on any one App & it happens anytime
    Has anyone had a similar issue & a fix for this?

    i am facing the issue as well, even post iOS 8 upgrade the frequency seems to have increased.
    Will be be reporting to Apple Store for diagnosis. Hope they have some solution or else a negative publicity typhoon is coming.

  • IPad air locking up frequently

    I have a iPad Air (part of the first ordered iPad Airs) that in the past 24 hours, has locked up more than 4 times.  No real distiguishable pattern - each time it has happened in a different app, including Apple/iOS (e.g. Settings).  Ive already done two hard resets, and it's still doing it.  I'm backing it up now and will do a restore, but just wondering if anyone else is having similar problems?

    This has been happening to me, and it is not a problem of not enough memory, etc.  I called Apple Support, and the tech had me turn the smart cover lock off and on, and reset the Network Settings, and it SEEMS to have made a difference.  So far, I have not had the problem again (which also included Safari's suddenly closing).  It also SEEMS to me that the iPad has its speed back.... I had not really noticed that it seemed to have slowed down, but since I made those setting tweaks, it has seemed much faster.  So, you might try these things and see if it makes a difference for you.

  • IPad Air 1 / iPad Air 2 screen color differences

    Hi
    I have two iPad Air 1's, fairly new, and just got iPad Air 2. When kept side by side (see pictures below: iPad Air 1 on left, Air 2 in middle and another iPad Air 1 on right. See the color differences on screen? How do I know which one is accurate? Why do the screen colors vary for a giant like Apple which is in pursuit of perfection?
    Note that the Air 2 has now been returned: After placing the screen protector, the "superiority" of Air 2 screen was diminished and I found lesser difference between Air 1 and 2 screen, not worth spending the extra $!!!
    See pictures below. Please also visit http://displaymate.com/iPad6_ShootOut.htm that says Air 1 usually has 7,041K vs iPad Air 2 that has 7,355K color temperature of screen, so iPad Air 2 (in center below) should have been more "blue-er" than the Air 1's on either side which does not seem to be the case! I am posting this to ask experts how to determine which is most accurate screen color and how to make sure I get iPad from the "right" batch? Any help/opinions? Thanks so much!

    Hi Churych620, Thanks for writing!
    The iPad Air 2 in middle is definitely more pale than iPad Air 1 on the right-most side of picture, whereas it should be the opposite. It may be possible that the Air 1 on the very right may be erroneously too blue!
    I just wanted to find out how to determine which is the best "white point" or display color temperature and how can I possibly select a good piece? Also I don't understand why Air 1's on wither side have their displays that different color temperatures!
    Thanks!

  • Activation/icloud on ipad air locked

    how do I get a  ipad air unlocked but the activation and icloud is locked

    If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
    If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
    You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.

  • IPad Air blue screen

    Hello,
    I have been a very loyal Apple customer for years now. I purchased my 32g, iPad Air back in January. I have been very happy with it. This past Sunday it began crashing to a blue screen. I have read previous threads from other users experiencing this problem and have followed their suggestions to the letter. I have reset the settings, factory reset it, and I have even used iTunes to reset the software. I am at a loss as to what steps I can now take to repair it. I am far from an Apple store or I would simply take it in. I would very much appriciate any assistance that can be offered in fixing this problem.
    Thank you.

    If the rest of your apps are working ok, then the problem lies in the Pinterest app. Couple of things to try.
    1. Quit the app and start it again. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.
    2. If that didn't help quit the app, delete the app, reset your device and then download the app again. To reset your device press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    3. If the app still misbehaves contact the developer of the app. It is unlikely the problem lies with Apple or with your device so long as all other apps you have are working normally.

  • Best stylus for ipad air with screen protector?

    Hi... I reaaly want to buy a stylus for my ipad air... I was thinking about Wacom Bamboo or Adonit Jot Pro... But, apparently, the first one doesn't work in ipad air and the second doesn't work with screen protector...
    Is those true?
    Please, help me...

    I use the Jot Pro with a tempered glass screen protector and it works flawlessly.

  • White dots and lines are flickering through my iPad Air's screen and sometimes I have to hard reboot to get the screen to work...ideas?

    I just got this iPad Air (32 GB wi-fi only) brand new from an Apple store on Saturday, so it's definitely not an issue of wear and tear. Basically, it looks like my iPad has bad TV reception, there's snow everywhere and lines running up and down the screen occasionally. It's not immediately noticeable, but once you do notice it you realize that it's on the entire screen. I managed to make it go away once by rebooting it which I found odd. I noticed this last night. Today, it was working fine when I woke up but a few hours later the screen wouldn't turn on. I could use Siri still so I knew the iPad was on and funtional, but I couldn't see anything. I managed to finally get it to work by hard rebooting it (Hold down top button + home) and it came alive again, but still has the snow. I rebooted it again and it didn't go away this time. Has anyone ever heard of this and if so is there anything I can do short of taking it into a store to get it replaced? It's obviously still under warrenty and I took Apple Care on it, so I'm not frantic about this, but if there's a DIY fix out there that would be great.

    Beaneebar wrote:
    I don't have AppleCare and my computer is no longer under warranty, so if I have to take it in, how much do you think it will cost me?
    If the machine matches your profile, Mac OS X (10.7.4), iMac 27', 2012 model, refurbished, then it should be covered under the first year of use. Contact Apple's Express Lane and verify. If it is, then after getting it fixed, purchase AppleCare—the cheapest insurance policy available for Macs.

  • Ipad ios7  - lock screen problem

    I didn't have a lock screen on my ipad before updaing to ios7 but it has appeared since updating and now the ipad is disabled! Any clues anyone? Am I being really stupid?!

    Forgot password or device disabled
    http://support.apple.com/kb/ht1212

  • IPad air is screen is frozen

    One of our I pads is frozen on one screen. It is an iPad air. We got it for Christmas. Any ideas what to do to fix it?

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Ipad air locked

    ipad air has the same passcode since purchase.   not sure why suddenly passcode doesn't work. 

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

Maybe you are looking for

  • Spry Menu Toolbar

    For some reason, I can't get my submenus to line up under their menu title on my spry horizontal menu bar. They are off centered to the right in Internet Explorer, but not in FireFox. Can anyone help?

  • Looking for a good music player application........

    Hey everyone, I am still looking for a great music player app for the Bionic and wonder if anyone could provide some good suggestions. The apps I have tried have all had something wrong with it 1) The bionic stock app is ok, but  the lock screen widg

  • Segment violation in instant client library

    Hi, I have the following problem: A Jboss/Java application accesses a database over JDBC. We use the OCI driver and Instant Client 10.2.0.1 connected to a two node Oracle RAC. After several days continuous operation this application crashes with a se

  • Creating dynamic table in livecycle ES pdf through coldfusion cfpdf.

    Hi, I have a pdf created in Livecycle ES, i am able to populate data in it with coldfusions cfpdf. but fields in pdf are static, means i will have to pass every field vale and coldfusion will populate it. But I have a Table in PDF i want it to be dyn

  • An unexpected error j3dcore-d3d.dll

    Hi, Could me someone help, please? I'm new with Java3D, I installed version 1.5.1 and just tried to run the HelloUniverse example. Maybe I have a problem with rendering? Many Thanks! The I get this: # An unexpected error has been detected by Java Run