IPad Air brightness changing with auto brightness off.

I Have an iPad Air and the brightness is set to maximum and auto brightness is turned off.  After using the ipad the ipad brightness will increase dramatically and stay like this for anything up to five min, then it goes and reverts back to what it was. This all happening with auto brightness off. It's not overly dull and somewhat bright but after seeing the brightness go up further it looks a lot better. I have rest the ipad, reset the settings, checked the auto lock feature and calibrated the auto brightness feature. The only thing I haven't done is a fresh install of the Current iOS 7.1.2
Any suggestions as to why this is happening would be appreciated or if anyone has encountered the same problem.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset  ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Similar Messages

  • My IPad Air is frozen with a white screen and Apple Logo on it.

    My Ipad Air is frozen with the white screen and apple logo.  I've tried resetting it several times and that doesn't help.  I tried connecting to ITunes, but it isn't recognizing the device. 
    The battery is fully charged, at least for now, so I am not sure what else to try.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

    hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

    Hi When  you change your iPad, even if its off it will, turn on when you connect, to charger Check  lightining port for any bits. Do a Reboot press &hold power button & menu button hold both down until you see Apple Logo This may help. Cheers Brian

  • TS3899 I HAVE IPAD AIR HAVING PROBLEMS WITH EMAIL DELETING AFTER A SHORT TIME WITHOUT COMMAND CAN YOU HELP

    Q. I have an IPAD air having problems with my email deleting after a short while without command.

    I've had issues like this before.
    I ended up having to call my provide to reset the connection, which worked for a while, then quit. i then took it into my provider for a new sim card and had the connection re-established again. I haven't had issues since.
    hopefully for you resetting the connection with your provider will do the trick and a new SIM card wont be nessesary.

  • IPad Air 2 comes with Apple SIM.  I have a Verizon data plan for my iPhone.  Does Apple sell Verizon SIMS or do I need to buy a SIM directly from Verizon?

    iPad Air comes equipped with an Apple SIM.  Apple SIMs do not recognize Verizon (only ATT, T-Mobile, and Sprint).  Does Apple sell Verizon SIMS or do I have to purchase a new SIM directly from Verizon?

    I guess I'll be returning to the Apple store to ask for a Verizon SIM because they did not give it to me when I purchased the iPad Air2 (I told them I had a Verizon data plan). Thanks.

  • I bought ipad air wifi  cellular with att at apple store, and am going to take it to Egypt. Do I need to unlock it from att? Will it work in other countries?

    I bought ipad air wifi  cellular with att at apple store, and am going to take it to Egypt. Do I need to unlock it from att? Will it work in other countries?

    There are many people using the basic (i5) 2012 MacMini and even older ones to edit complex films in FCP X so you should have no problems.
    I have been using FCP 7 and FCP X since they came out on my 2008 iMac Core 2 Duo and am thinking of getting the same model as you rather than pay the astronomic price for a new 27" iMac.
    The performance won't be quite as fast but it will be at least 4 times faster at rendering than my old iMac.

  • Okay so my new ipad air has come with some free apps such as iBook, find my friends, iMovie ect... And my iMovie isn't in my app list so I tried goin to App Store n reopening but it comes up with you have purchased so no additional charges n doesnt dwnlod

    Okay so my new ipad air has come with some free apps such as iBook, find my friends, iMovie ect... And my iMovie isn't in my app list so I tried goin to App Store n reopening but it comes up with you have purchased so no additional charges n doesn't download at all!

    How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
    http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
    About Free Apple Apps for iOS 7 compatible devices
    http://support.apple.com/kb/HT5913
     Cheers, Tom

  • Hp 6500 wireless auto answers with auto answer off

    hp 6500 wireless auto answers with auto answer off intermittently using WIN 7

    OK, we are going to reserve an IP address for the printer.
    We will start with printing the IP and MAC address from the printer.  Go to Seutp, Network and then Print Network Config Page.
    Now, go into the settings of the router by typing 192.168.1.1 into a browser that is attached to the router.  The login is 'admin' and the password is 'password'.  Go to LAN Settings on the lower left.
    On there we are going to reserve an IP address for the printer at the bottom of the page.  Click Add, type in the info you have from the printout (IP address, whatever name you want to give it, MAC address).  When you are done, click Apply.
    After the router reboots, turn the power of the printer off, then back on.  Hopefully the troubles will go away.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Ipad Air keeps changing contrast/color saturation while watching youtube videos

    The whole screen fluctuates contrast continuously while watching youtube videos on full screen.The odd thing is it only happens if they are on full screen,and as soon as i switch the video to window mode,the very high contrast fades aways slowly.Please help i dont know what to do.Auto-Brightness is off.Also when if i pri tscreen,th high contrast does not show,the photo looks normally.

    I have this problem too. It's really annoying, especially when I'm viewing movies from iTunes. Does anyone know how to fix this?
    I'm using an iPad air with iOS 8.1.3

  • Brightness slider and auto-brightness

    Can someone explain how this works?
    What role does the brightness slider play when auto-brightness is enabled?
    It seems to affect the brightness, but I haven't quite figured it out...
    Thanks,

    Probably the zoom feature enabled, double tapping with three fingers will bring back the screen to normal size again in that case.
    To find out if the brightness issue is software related, set your device back to factory settings, without using the latest backup.
    If the brightness sensor works after that, use the backup to restore from. If the problem is coming back, your backup contained corrupt data.
    Also take your protective case or film on your screen off, just to make sure nothing interferes with the sensor.
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • I can't see my i4 phone in bright daylight. Auto brightness is on.

    Any suggestions?

    Go inside? Seriously, it's a limitation of the technology.  You might try tiring auto brightness off and manually adjusting the brightness.

  • My iPhone 4s and my IPad Air doesnt Sync with iCloud very well

    they just dont work as they supposed to. They don't sync my contacts well neither my bookmarks or my list of reading. This is annoying me so much.
    So, any help please?
    p.s.: I've tried to turn off safari and contacts sync, turn off the devices and turning them on and Safari and contacts too, still don't work well.

    Hey Matheus M. Jeronimo,
    If you are having issues syncing your iPad Air with iCloud, I would first suggest updating your iOS to the most recent version.  Here are some troubleshooting resources for contacts, bookmarks and reading lists.  Click on the links for complete details.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Get help using iCloud Contacts - Apple Support
    http://support.apple.com/en-us/TS3998
    Get help using iCloud Bookmarks and Reading List - Apple Support
    http://support.apple.com/en-us/HT203519
    Hope this helps ...
    - Judy

  • Expose not working with auto-login off

    I've been using Snow Leopard with auto-login logging into my user. However, I recently decided to turn auto-login off so someone couldn't just turn on my computer and be logged in as me.
    When I do this, expose functionality ceases to work once I'm logged in. The track pad and the button (f3) do not execute expose functionality.
    If I change my settings back to auto-login to my user, everything is fine again.
    Any ideas?

    try resetting your dock preferences which contain exposé settings. delete the file /users/username/library/preferences/com.apple.dock.plist and log out/in. your dock, spaces and exposé will be reset to the defaults. configure them and see if it works ok now.

  • Forgot password on ipad air, cant reset with itunes because it keeps say i need to log in and make a confirmation so what can i do

    forgot password on ipad air and cant sync with itunes what can i do ?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • IPad Air 2 : Issue with re-installing iWork Apps

    Hello All,
    During my recent vacation, I bought an iPad Air 2 (64 GB). Since this was my first iOS device, I used my wife's Apple ID to quickly setup and use.
    On reaching home, I created an Apple ID and made relevant changes on my iPad to reflect my ID.
    But by mistake I deleted/uninstalled one of the iWork Apps, now when I goto App Store, it requests for a purchase. Why? Since iWork Apps are pre-installed on iPad Air 2, shouldn't it allow me to re-install these apps?
    Could you pl help me solve this issue.
    Regards,
    Srinath

    If you originally used your wife's account to activate the iPad then they will be tied to her account, only her account will be able to redownload them for free - though they were preinstalled on the iPad (as it's capacity was 32+ gig), they would have been linked to your wife's account when you activated it.

Maybe you are looking for

  • Can I change the background color of a caption?

    I would like to tone down the background color of a caption, and was wondering if and how I could do this. I found the caption image in the gallery, but it has an accompanying .fcm file which am not familiar with. Any help would be appreciated. Thank

  • Clearing documents in AP

    Hi, Just need advice on a special business scenario. There are many invoices created which are open in AP. Due to a special business requirement, all these have to be netoff against a write off account meaning, won't be paid. There docs to set off ba

  • How do i transfer files from external hd to new hd in macbook pro

    Hi Totally new to upgrading Mac.  I Backed up my hd to a an external hd. Upgraded my hd to 1tb. How do I make the transfer? The new hd does show in disk utility. Do I have to format this hd? Really not sure what to do next. Thanks

  • Calendar Project Quirks

    I'm trying to build my first calendar using iPhoto 7.1. I'm using the Picture Calendar theme. I've selected several events and have placed them in the calendar photo media browser. The resolutions of the photos range from 1600x1200 to 3008x2000 (3 ca

  • Error in Workflow JTFTASK

    Hi, Ours is 11.5.10.2 version. Once we login to Oracle applications, above of responsibility list. we see some messages like "Error in Workflow JTFTASK /20991-10881 3205: 'AASTML' is not a valid role or user name. ". From where it's generating these