IPad Air case causing problems

My brand new Apple case keeps shutting down my brand new iPad Air as the case presses on the switch. The opening in the case where the lightning cable is plugged in is also badly aligned and I have to fiddle with the case to get the lightning cable to engage. Is anyone else experiencing problems like this?

I bought my iPad Air and decided I needed a case on it FAST. I looked at dozens of cases/covers online from a variety of sources. It's super expensive, but I kept coming back to the genuine Apple iPad Air case. Bought one and it works flawlessly. All of the attachment holes line up (speakers, mics, headphone and Lightning jacks, camera, etc) and the iPad fits securely. Cover closes perfectly and the fit, finish and materials quality is what I was expecting from Apple.
Hated spending that much on a case but after spending $499 + tax on an iPad, I only wanted the best case to protect it. Easier to use and enjoy this super thin, light and fast iPad when it's protected from dirt, grime, scratches and dents. Hopefully in a fall but hope that doesn't happen. It's a personal decision and you'll need to go with whatever makes you the happiest...
Ryan

Similar Messages

  • Best Ipad air case that are Smart Cover compatible

    I'm looking for a clear ipad air case that covers the back of my ipad but still let's me use the Smart Cover and I don't want to pay a lot for it

    I have used box wave's product in the past and they're great
    http://www.amazon.com/BoxWave-Arctic-Frost-Apple-Crystal/dp/B00G6YM08Y/ref=sr_1_ 2?ie=UTF8&qid=1383944440&sr=8-2&keywords=ipad+air+tpu

  • First time I planned to buy a ipad Air. After seeing ipad Air having screen problems, dropped my plan. Planning to go for samsung Note 10.1 2014 edition.

    First time in my life, I planned to buy a ipad Air. After seeing ipad Air having screen problems in the community, dropped my plan. Shall I go for for samsung Note 10.1 2014 edition otherwise wait for ipad Air 2.

    For every iPad Air with screen problems there's a million that work fine.. If you buy at the Apple Store take a good long look and hand it back if it's not right.

  • Ipad Air iOS8 safari problems

    Quite often my iPad Air won't let me select or tap links in safari in iOS8.0.2, the screen is unresponsive.. If i move or scroll the web page it then allows me to click on links.

    The EXACT same issue here, albeit an iPad 3, just over a year old, cannot click on anything in a web page till ive scrolled, it's just spazzed out on me and turned off with the apple logo, didn't turn back on, took me 10minutes to get the thing back on, everything is slower since ios8 and even worse since 8.0.2, apps don't respond, doesn't recognise multi gestures? Evidently this is a major problem and it would be prudent for Apple to check in on this one. I'm sure they could do without the press ravaging that one as well as a few morons who sat on their phones and want a replacement. (Unless they really do just fold under pressure, I wouldn't know - im still waiting for my £700 purchase to be delivered over a MONTH after it was promised).

  • IPad Air ...problem!!

    I recently bought an iPad Air and it's been giving me a lot of trouble, a lot of my old apps have all of a sudden disappeared and the ones I download now just vanish after the download. Even the default clock app seems to have disappeared . In the settings it's hoes the apps as downloaded but in a bracket it says 'null'. It's not even been 6 months since I bought this thing and now it's as good as useless. I've tried all possible methods which people have listed but nothing seems to retrieve the apps. I'd really like some tips here ! And there are a couple of problems like the sound which seems to only come back after I reset it !

    Suggest you try the reset again.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IPad Air wifi connection problems

    I Got a new iPad air as a gift from kids, Dec. 2013 to replace my iPad 1. this new iPad has never been able to stay connected to wifi...if I step away from using it for more than 20 min. I have to go into settings to reconnect. Everyday, all day long this has been an issue! For more than a year now ATT has been to my home and on the phone trying to resolve issues...new router/modems....run new wires....etc. I have documentation form office of the president for these issues For the past year. 3 days ago an ATT trouble support person concluded it was an Apple issue and told me to call them. I have been two days of troubleshooting over the phone with Apple Support and nothing could be fixed, they said never heard of the issue.....but I see hundreds of this issue online.....so they set up for me to have it replaced with a new one of the same....took it in last night 1/30/2015, since I have all documentation for the past year there would be no charge, but I lose my engraved iPad. Ok so get it home, set it up, restore and all those things.....working fine. Get up the next morning and guess what?? Safari cannot get a connection....mail cannot update....games won't updat....ALL of the exact same issues.  This ipad has a 90 day warranty......what is my solution to this ongoing very nerve wracking problem? all my other wireless products stay connected all the time...printer, laptops, iPhone 5s....other brands of phones....so far no problem with iPhone 6, but that phone is not here full time to check daily. I don't think I can take to much more of this run around....what is the solution please?
    Yes, everything has been tried.....reboot every product involved...reset....everything. What is Apples solution for this issue? Yes my iPad is updated. Thanks.

    Definetively I'm WiFried once again!

  • IPad air 2 wifi problems

    hi all,
    im having issues with my iPad Air 2 and I'm hoping someone can help!
    when using the YouTube app the videos take a long time to load and while watching a video the quality keeps dropping so you can't even make out what's on the screen. I try pausing the video for a while to see if that helps but that does nothing. Eventually the quality improves and I can watch in HD again. I've usually lost 30 secs of video by then!
    im finding this very frustrating and I'd love to know if this problem can be fixed??
    i have the iPad 3 which has pretty old software, maybe ios6? Can't remember now. But anyway, I have no problems with that at all!
    ive tried all the switch off and back on or renew lease etc and none of this works!
    can anyone help me?
    Thanks.
    Dan

    Thanks for the advice Brian. ive been messing around with YouTube a bit more and I've found that if I change the quality from "auto" to 720p the videos stream perfectly. Is that more likely to be an issue with my internet connection or the iPad?
    thanks

  • IPad Air 2 Gyroscope problem

    Hello everybody. Today i bought a new iPad Air 2 and I am facing some big problems with it. Sometimes the screen refuses to rotate automatically, i downloaded an App called "DualLevel" and it shows 30 degrees off on Y axis on a plat surface. I am running ios 8.1. Is it a hardware problem or software. I will be very thank full if somebody could help me with and advice.

    There is currently a very, very long discussion going on about this issue. I have an iPad Air 2 and it has made the popping sound a few times in the three months that I have had it. It is very random and it may go weeks without occurring again. I'm not sure what to tell you, but you might want to see what is going in on in this discussion here.
    iPad air 2 pop noise

  • New Ipad Air & facebook login problems

    My friend is having problems loging into facebook form her new iPad Air. It is asking for a 4 digit verification code that she did not have on her old Ipad.
    It won't let her login. What should she do?

    If you are running from Safari, it may be the site requires Flash player which most mobile devices don't have.
    Try downloading a mobile news app for your local network TV station.

  • HT4623 iPad Air update and problem

    When doing the current update, my screen went black and I can't get it to turn back on. I have an iPad air.
    Thx for your help!

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • IPad Air and Cloud: problems

    Hi all
    just received my new iPad Air. I restored sucessfully from my old iPad, except Cloud Service.
    Under "settings -> cloud" everything is grey shaded. The only accessable point is end user licence, which I have to accept. Then password and here it's over: nothing happens, just the turing circle ...
    Any ideas?
    rgds
    hela

    Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.

  • What is the best iPad air case?

    Just got my new ipad and have been trying to find a decent case/cover for it.  I used to have a belkin tri-fold cover/case for my ipad 3 and that did the job.  With the air being so thin and light i dont want to beef it up too much with a cover. 
    Had been looking at the Logitech protective folio case - but read that it's very heavy.
    Any suggestions or recommendations????????? 

    I got the Smart Cover (front side only) and now I'm looking for something to protect the back side. I didn't purchase the Smart Case because it's too expensive. I don't want to add thickness to it either. I just need something to protect the device while I'm on the go. This sleeve looks great:
    http://goincase.com/shop/incase-neoprene-pro-sleeve-for-ipad
    LivingSocial has a 50% discount coupon. Head over to slickdeals. Search for incase for iPad. That's how I got mine. I'm about to get one tonight.
    EDIT:
    I just read a response from Kappy after posting my reply. I'm new here and honestly don't know this forum rules. If my post violates the rule... mods, feel free to delete my reply in this thread.

  • Scalar Select stmt in Case causing problems

    Hello,
    here is some background followed by my question
    I have two tables, headerx and detailx which are joined
    Detailx has a sequence number column
    I would like to query detailx such that if for any header there are more than one details, it should return the highest sequence with state = passed.
    If there is only one detail, then it should return that detail row.
    So, I came up with this SQL:
    select DTL.ID, DTL.TSTAMP
    from HEADERX hdr inner join
         DETAILX dtl on DTL.HDR_FK = hdr.id
    where dtl.seq =
         (select case max(seq) when 1 then 1
                                       else (select max(seq) from DETAILX dtl3 where dtl3.hdr_fk = hdr.id and dtl3.state='PASSED')
                                       end
           from DETAILX dtl2
           where dtl2.hdr_fk = hdr.id)
    ; The above threw a ORA 937 - Not a single-group group function
    If I remove the embedded select inside the case and replace it with an arbitrary value, there is no error and some rows are returned
    select DTL.ID, DTL.TSTAMP
    from HEADERX hdr inner join
         DETAILX dtl on DTL.HDR_FK = hdr.id
    where dtl.seq =
         (select case max(seq) when 1 then 1 else 2 end from DETAILX dtl2 where dtl2.hdr_fk = hdr.id)
    ; Not really understanding why, I added a group by which appears to work
    select DTL.ID, DTL.TSTAMP
    from HEADERX hdr inner join
         DETAILX dtl on DTL.HDR_FK = hdr.id
    where dtl.seq =
         (select case max(seq) when 1 then 1
                                        else (select max(seq) from DETAILX dtl3 where dtl3.hdr_fk = hdr.id and dtl3.state='PASSED')
                                        end
          from DETAILX dtl2
          where dtl2.hdr_fk = hdr.id
          group by 1)
    ; Question: Why is the group by required? Clearly there is only one scalar value that will be returned
    If anyone cares to suggest, is there a more elegant solution?

    Instead of joining the same table too many times,
    You can do this,
    Not tested,
    SELECT DTL.ID, DTL.TSTAMP
      FROM    HEADERX hdr
           INNER JOIN
              (SELECT dtl.*, CASE WHEN MAX (seq) OVER (PARTITION BY ID) = 1
                                  THEN 1
                                  ELSE MAX (DECODE (state, 'PASSED', seq)) OVER (PARTITION BY ID)
                              END mx
                 FROM DETAILX dtl) dtl
           ON (DTL.HDR_FK = hdr.ID
           AND hdr.seq = dtl.mx)
    G.

  • I Got a new IPad Air and have problems running videos from the internet

    i'm having problem to run videos from internet news's site

    If you are running from Safari, it may be the site requires Flash player which most mobile devices don't have.
    Try downloading a mobile news app for your local network TV station.

  • My iPad air has power problem it is off and i cannt turned on

    i do not knw what happen to my iPadAir it just got off i can't start agian it is off completly

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for

  • Adding a Variable name to a filename in background processing

    Hi All, Currently when I run a background process I am giving it a file name of   file_name = '/tmp/END_CUST'.   CONCATENATE file_name '_'  v_dat '_' v_tim '.txt' INTO file_name. This works and shows the filename correctly. However before running the

  • NO quote for some line items in a Bid Invitation

    Hello Experts, We have implemented SRM 5.0/Bidding Engine. For example, When we create bid invitation with 10 line items, and invited about 5 bidders to participate. Please note each one of line item is having about 15 attributes which are all requir

  • How to add fields to output list of BP search

    Hi, We have MDM 3.0. Currently we use the standard SAP-MDM Business Partner search functionality for searching a business partner. In the output list/result list of a search currently the fields street2/street4 are not shown. Can anybody tell me if i

  • How do i downgrade to IOS-5 last version?

    How do i downgrade to IOS-5 last version?

  • Loop movie twice then stop

    I want to play my Flash movie twice then stop at the final frame. The stop() action script does not allow a set number of loops. What action script do I use?