Ipad air display not charging message with the original 12w wall charger

my ipad air display not charging message with the original12w wall adapter but when i use asus ai charger (program for pc to charge the ipad)it charge normaly without display not charging  any solution

Most computer USB port do not supple enough current to charge the iPad.

Similar Messages

  • My Ipad mini is not turning off with the botton neither with the cover. It is not also turning on when  I open the cover. Please, what I have to do.

    My Ipad mini is not turning off with the botton neither with the cover. It is not also turning on when  I open the cover. Please, what I have to do?

    If the cover you bought is not a legitimate apple cover than you may be having the same issue I had.
    The one I purchased has a top cover swivel, if you spin it around( meaning the top case cover)
    The magnet will return to the correct spot and it will work again. It is only located at one end of the case.
    Hope this might help:)

  • My Ipad 4 wont charge on its original 12W wall charger

    My Ipad 4 wont charge on its original 12W wall charger but when i charge it to an ASUS 7watts charger it runs and goes 100%. Thus Its cable is good.
    Please advise what would be the next move to address this issue. I dont want to use other brand of charger just to use and appreciate the new 12W adapter.
    Current OS: IOS 8.1.2

    So when you use the Apple charger it doesn't work but when you use the Asus one it does?
    Suggests to me that the charger is bad.
    If your charger is less than a year old, make an appointment at your local apple store and take it in. It should be covered by the warranty against manufacturer's defects. If it's out of warranty, you can buy replacement chargers at any major retailer. (I got one for my iPad at Walmart)
    Just make sure to get an Apple one, not a knock off.

  • HT1386 iPad Air will not sync; message appears that sync server failed to sync the iPad

    New iPad Air will not sync contacts and calendars to Outlook.  Set up device in December, tried to sync today, Feb. 8th, after updating to iTunes 11.1.4.62; message appeared that iTunes could not sync contacts to the iPad because the sync server failed to sync the iPad.  Uninstalled 11.1.4.62 and installed 11.1.3.8 and still would not sync.  Synced an earlier generation iPad about 2 hrs. earlier today.  What do I need to do?
    DGB

    I'm having a similar problem ... just used my iPad 2 to purchase the Bourne trilogy and it downloaded fine but I did not try to play it right away.  Then I plugged the iPad into the computer and it downloaded the SD versions of the movie and I used iTunes to sync my movies.  Then I tried to play it and it said it could not open the movie.  I then did a full iPad restore and did a fresh sync and now I get the Cannot Opne pop up.  Did you ever find an answer to your question?

  • New Apple ipad air display not working,please help?

    Please can anyone offer help? Week old ipad air display has stopped working after app froze and son double tapped home button to shut app down.Thank you in advance for any offers.

    If you are editing/testing in the Flash editor, the html end of things is nothing to be concerned about at this stage, and will likely take care of itself when it comes time.
    So you run the file in Flash and do not get any error messages?  Then place a trace command inside the button's event handler function to see if the button is communicating with it....
    function b_1ClickHandler(e:MouseEvent)
        trace("button works");           
         navigateToURL(new URLRequest("http://www.MYURL.com/.html"),"_self");
    Also, I'm just noticing you don't have an actual file named in the url, so in case the "not working" is that you can't get the desired page to show, that may be the cause.  Normally I would suggest testing url links online rather than in Flash because it's iffy to try to get the web involved with the editor at times.

  • Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

    Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

    I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
    If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport"  it replies it cannot locate it)
    I suppose everything will be fine when you'll be out of censorship....
    Perhaps iOS  Apple Maps are absolutely useless for expatriate in China.
    Use Google Maps instead
    BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

  • Can I charge my ipod classic in Germany with the same usb wall charger I use in the USA, by plugging it directly into the correct adapter plug? Or do I need a power converter/transformer?

    I will be in Germany for a year. I want to take my ipod classic and charge it with a usb wall charger, like I do here in the USA. Can I simply use the correct wall adapter plug for Germany, or must I use a power converter/transformer in between?

    It should work as long as the prongs adapter are adapted to the outlet configuration.
    From http://manuals.info.apple.com/MANUALS/0/MA188/en_US/iPod_2ndGen_USB_Power_Adapte r-EN.pdf
    Specifications  Input: AC 100-240 volts (V), 50/60 hertz (Hz)  Output: DC 5V, 1 A

  • Ipad mail is not deleting messages off the server

    I have my setting configured to delete email;s from server when removed from inbox but it doesn't.  My provider stopped my account because I had 1200 messages in there.  Any ideas?

    Are you sure that instead of "when removed from inbox" it isn't "when deleted"?
    It may be a problem with how your provider interacts with commands coming from the device.  Which provider is this?  Perhaps someone who uses the same service will be able to assist you.

  • My Ipad Air will not let me close the app i cant go to multi task either and the only thing on screen that changes is the date time and whether i have silent ringer or not, i also cannot access the control bar. Help would be much appreciated

    My Ipad aint working, i have tried everything

    Try this. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.

  • HT201412 I have a new iPad Air and it is asking for my Passcode which I thought i knew but it is not turning on with the code I thought I entered?

    I have a new iPad Air and it is asking for my Passcode which I thought I knew , but it is not turning on with the code I tought I had entered?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipad air will not charge when connected to any outlet with its own cable and plug.

    I had this Ipad Air since March 2014 and always kept it updated and charged, but since three days ago it does not seems to like its own charging cable and plug that came with it. I tried different outlets and other cords and plugs. I closed and restarted it, but no result. Now it is off because of no battery power. What can it be?

    Try the following:
    Option 1
    1. Settings>Airplane Mode>ON
    2. Turn the iPad OFF
    3. Leave unit off for about 20 seconds. 
    4. Turn the iPad back on and it should now show "charging"
    5. Turn Aeroplane Mode OFF
    Option 2
    Reset iPad and when the apple logo shows up, plug in the charger.

  • My iPad air is not connecting with window 8.1 and is not synchronizing the photos any more

    My iPad air is not synchronizing the photos any more on my dell windows 8.1

    Hi there Raalb,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

    Air MD792E/A, iPAD WIFI CELL 32G Space Grey 
    Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?       Tried to sync with itunes but iTunes can't sync without a password.  I cannot see summary on the side bar.  How do I restore so I can restart my  iPAD Air since it has relatively no history. I have not had the chance to use it yet.  Finished set up to as far as the start menu.
    <Personal Information Edited by Host>

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My iPad air will not charge connected to my monitor or my computer. Why?

    My iPad air will not charge connected to my monitor or my computer. Why?

    Short answer:  Computer USB ports don't deliver as much power as the power adapter that comes with the iPad.
    Details:
    Full size iPads come with either a 10W or 12W power adapter.  The mini comes with a 5W power adapter.
    See iPhone, iPad, iPod: Using iPad Power Adapters
    http://support.apple.com/kb/HT4327
    USB ports on computers deliver 2.5W (USB 2, 500mA x 5v) or 4.5W (USB 3, 900mA x 5v).
    Newer Macs with high power ports can deliver 5.5W (1100mA x 5v).
    See Apple Computers and Displays: Powering peripherals through USB
    http://support.apple.com/kb/HT4049
    If you connect your (full size) iPad to a computer USB port, it may charge slowly, but since it's getting less than half the normal charging power, it may say "not charging".  It may charge slowly or it may not depending on use (screen brightness, processor load, etc.).  If you really want to charge it from the computer, put the iPad to sleep.
    The best charging solution is to use the Power Adapter that came with the iPad.

  • My iPad air would not start.  Only show the apple logo then no reaction after that.

    My iPad air would not start.  Only show the apple logo then no reaction after that.  This is already the 2nd time.  Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem.  It happened less then 30 days and same problem again.  Can someone please send me the hard-reset step so I can try myself before I send back to the service center again?  thanks

    Here's the hard reset info:
    http://www.hard-reset.com/apple-ipad-hard-reset.html
    Post something about what happened with your visit.

Maybe you are looking for