IPad Air display refresh rate for full screen movies?

What exactly happens if I play a movie on the iPad full screen with a rate of e.g. 24p, 25p or 50i?
The stated maximal refresh rate is 60Hz.
Will this rate be reduced when playing movies?
Or will frames be dropped / interpolated if the frame rate and the refresh rate don't match?
Or will the movie be sped up / slowed down?
When using the HDMI adapter, I can see that it always outputs 60p, regardless of the movie frame rate. But maybe this is different on the internal panel.
Thanks for any insight!

Should it happen again double tap the screen with three fingers. Then go to settings> general> accessibility> zoom> off.

Similar Messages

Cursor doesn't disappear for full-screen movies.

I believe it only happens when I'm watching something streamed over the internet. It's not limited to the web browser I'm using though. It also disappears sometimes, but very rarely. I thought it was a problem with my iMac but it's happening on my new MacBook Pro too. Anyone know why?

Is the mouse connected directly to the Mac Pro or a third party hub?
And have you tried a different USB port?

Satellite A100-153: What are verical and horizontal refresh rates for my display

How can I found out what are verical and horizontal refresh rates for my display?

Hi
Do you mean the vertical and horizontal display resolution???
Anyway all informations should be listed in the user manual.
I dont know exactly what appendix is it but it must be placed somewhere at the end of the user manual.
Such infos are listed also in my user manual which was delivered and preinstalled on my Satellite notebook.

The refresh rate for Mac mini 2014 at 3840x2160 using Thunderbolt

Here: http://www.apple.com/mac-mini/specs/
, it says that the refresh rate for resolution 3840x2160 for HDMI is 30 Hz.
I'm wondering if it's the same using Thunderbolt, or more correctly DisplayPort.
Thanks!

MacMagnus wrote:
Ok, thanks!
If I could ask another question regarding this... is 30 Hz poor even for desktop work? Or movies.
I believe the 30Hz is progressive and therefore for movies/video would normally look quite good. However for sports e.g. soccer which has a fast moving object i.e. the ball it would be less good. I have also seen comments suggesting that for computer use it is also less desirable particularly when you are scrolling as this entails affectively the entire screen image 'moving fast'.
This is not based on personal use as I cannot afford a 4K screen yet myself. However for DVDs 24p is considered a to give a good image for movies and this I can confirm from personal experience so 30p should be even better. Obviously 60p is better still but for that you need either a Mac Pro, iMac or MacBook Pro Retina.
It is probably going to depend on what you will be using it for. Perhaps you should consider spending a little more for a MacBook Pro Retina which can do 60 Hz.
See Using 4K displays and Ultra HD TVs with Mac computers - Apple Support

Solaris8+patch display refresh rate problem

I have installed the 109401-05 video patch for Solaris8 to update the video
card drivers. But now at 1600x1200 screen resolution the maximum display
refresh rate is always 60Hz, altough higher settings in kdmconfig. The behaviour is similar at 1280x1024, but the max. rate is 80Hz. I have tryed
this with the ATI Xpert2000pro and Xpert98 graphic cards.
Without the patch the refresh rate is OK (with the Xpert98 card). The
motherboard is Abit KT7.
Does anybody know what could be the problem?
Thanks, Albin

Hmm, if the refresh rate was OK before you installed the 109401-05
video driver patch, why don't you uninstall that patch? Or do you
need some other bugfix included in 109401-05?
Otherwise the 60Hz problem problem with certain old ATI cards is not unknown to me:
See this Solarisonintel posting for a possible solution.

T61p Wuxga display refresh rates

Hi!
I suspect that my GNU/Linux installation sets the wrong refresh rates for my 15.4" WUXGA 1920x1200 display. It sets the vertical rate at 50, which seems very low.
I can't seem to find what the correct rates are in the documentation that came with the computer. Does anyone know? If you don't know the horizontal rate, I'm still interested in the vertical rate. What does Vista set? (I removed Vista, so I can't check myself.)
Please help!

Adamaxus -- searching the web I find a lot of such claims. I didn't know this. But I do know from my own experience that vertrefresh has a huge impact on my stationary lcd monitor. Are there different kinds of lcds that behave differently in respect to vertrefresh?
Anyway, I don't have any flicker on my T61p screen. It only bothers me that xorg and nvidia-settings report different refresh rates, and that some GL applications might get the wrong info and slow down because of it.This is one of the explanations floating around the net for slow gl desktops on T61p.
If 50 is the default refresh rate, I would think that xorg is right and nvidia-settings is wrong (it reports 60).

HT204053 Just updated my login to apple on mac but ipad still displaying old email for login. Anyone know how to update ipad to new login details?

Just updated my login to apple on mac but ipad still displaying old email for login. Anyone know how to update ipad to new login details?

Hello Beeched,
Thank you for the question. Are you seeing the previous Apple ID in the iTunes and App Store? If you are, use these steps to sign in with your new Apple ID:
Sign in with a different Apple ID
Tap Settings > iTunes & App Stores.
Tap your Apple ID.
If you see the option to Sign In, you can change your Apple ID now.
Tap Sign Out.
Enter your Apple ID and Password and tap Sign In.
Or if you don't have another Apple ID, tap Create New Apple ID.
You can find the full article here:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
If you trying to change the Apple ID signed into iCloud, use these steps:
On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Once you delete the account from your device, you will have an option to sign in with your new Apple ID in Settings>iCloud.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Is the iPad Air display resistant? What is it made out of?

I would like to know if the iPad Air screen is resistant, and if the answer is "yes", what is it made of then?

Here are detailed explanations of all the components of the iPad Air display:
IGZO display tech finally makes it to mass market: iPad Air now, high ...
Apple's iPad Air Adopts IGZO Technology for Thinner, Lower-Power ...
Here is the internal structure of an LCD display:
The resistance [to damage?] question is completely subjective and depends on, for example, if you drop it on your bed or drop it off the Empire State building.
Message was edited by: nbar

New Apple ipad air display not working,please help?

Please can anyone offer help? Week old ipad air display has stopped working after app froze and son double tapped home button to shut app down.Thank you in advance for any offers.

If you are editing/testing in the Flash editor, the html end of things is nothing to be concerned about at this stage, and will likely take care of itself when it comes time.
So you run the file in Flash and do not get any error messages? Then place a trace command inside the button's event handler function to see if the button is communicating with it....
function b_1ClickHandler(e:MouseEvent)
trace("button works");
navigateToURL(new URLRequest("http://www.MYURL.com/.html"),"_self");
Also, I'm just noticing you don't have an actual file named in the url, so in case the "not working" is that you can't get the desired page to show, that may be the cause. Normally I would suggest testing url links online rather than in Flash because it's iffy to try to get the web involved with the editor at times.

My IPad Air is frozen with a white screen and Apple Logo on it.

My Ipad Air is frozen with the white screen and apple logo. I've tried resetting it several times and that doesn't help. I tried connecting to ITunes, but it isn't recognizing the device.
The battery is fully charged, at least for now, so I am not sure what else to try.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

[Non IE Regression] Support for full screen mode with multiple monitors

This seems to be a regression with Flash Player v11.2.202.x (for all other browsers).
With Internet Explorer it is still working.
http://kb2.adobe.com/cps/890/cpsid_89050.html
== Support for full screen mode with multiple monitors ==
Full screen content will remain in full-screen on secondary monitors, allowing users to watch full-screen content while working on another display.
Tested on Windows 7 x64 SP1 with:
- Internet Explorer 9
- Firefox Release, Beta, Aurora, Nightly
- Opera 12 build 1116
In bugbase.adobe.com I cannot choose v11.2.x

Please vote for it If you have the same problem:
https://bugbase.adobe.com/index.cfm?event=bug&id=3016912
Thanks

Clickonce application can't run on Linx 10 Windows tablet for full screen

My C# Clickonce application can sucessfully installed and run on a Linx 10 Windows tablet. My working station is set as 1280*800 resolution and the tablet is also been set as 1280*800. The form size is therefore set to 1280*800. My Clickonce application
can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen. Is any one can tell me why? What I need is let my software to run in full screen on this windows tablet.
I don't want to set the windows forms to 'maximum'. This will make the buttons on the form looks mess.
Best wishes,
Mingxu

My C# Clickonce application can sucessfully installed and run on a Linx 10 Windows tablet. My working station is set as 1280*800 resolution and the tablet is also been set as 1280*800. The form size is therefore set to 1280*800. My Clickonce application
can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen. Is any one can tell me why? What I need is let my software to run in full screen on this windows tablet.
I don't want to set the windows forms to 'maximum'. This will make the buttons on the form looks mess.
Best wishes,
Mingxu
Hello Mingxu,
Maybe you mean your project is a windows form application, and you deployed it with ClickOnce and get that installed, right?
>>My Clickonce application can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen.
Which form has this issue, the one when you installing that application or the form you are running the application?
I will based on the result to get the proper forum to help you, and if that is an issue about the form of your windows form application, then this is the right forum for your issue.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Refresh rate of the screen?

What is the refresh rate of the screen on the iMac?

I think the other poster was meaning what is the response time of the LCD in milliseconds.
A note about response times, they are generally bogus when it comes to picture quality because they are measured differently by each manufacturer. The general use of the LCD needs to be taken into consideration. I have had no issues with ghosting in movies or anything I have done, but I don't do extreme gaming either. The response time is good enough for about anything a person might do with the computer, this shouldn't be a deciding factor on whether or not to purchase the machine.

Ipad air display not charging message with the original 12w wall charger

my ipad air display not charging message with the original12w wall adapter but when i use asus ai charger (program for pc to charge the ipad)it charge normaly without display not charging any solution

Most computer USB port do not supple enough current to charge the iPad.

Poor display refresh rate during playback

When I say "display refresh rate" I'm talking about the various toolbars, level meter and the clock. I'm not talking about the time coding like in frames of a video clip vs. minutes/seconds/decimal but how fast those toolbars visually refresh their information. In Cool Edit Pro 2.1 they were real-time. Level meter and clock would refresh at the max speed of 61 frames per second (limited by monitor). However Audition refreshes at what I am guessing is around 12-15 FPS. The level meter is like watching stop motion animation and the clock skips along by fractions of a second instead of a smooth continuous spin. That rate makes the whole program appear sluggish and the level meter bars do not peak, just the resulting tic mark appears. The sound is fine and uninterrupted.
It is not a hardware issue. This is primarily a gaming rig (Nvidia 280 GTX, X-FI Fata1ity, Intel Quad core, 4GBs RAM, Vista 64x, etc.). I do audio editing as a side job. I've used versions of Cool Edit Pro for nearly a decade on many machines including this one and I want to upgrade to a multi-core/multi-thread version to make editing faster. Is there a setting somewhere to set faster display refresh rates?

KougarLOB wrote:
Is there a setting somewhere to set faster display refresh rates?
I don't think so. That would be the setting that replaces any form of Vista with XP, I suspect, and M$ thoughtlessly didn't add that... but you could try turning off every single service that isn't needed, and try unplugging any form of networking connection - the polling these do can screw the response of your entire system. That's why dedicated DAWs are built - to get around all of the throttling that your average or gaming PC does. Look for an app like EndItAll, and run it before processing audio. No, I don't know why it happens, but there have been problems with video displays almost forever with CEP/Audition - simply because as an app, it doesn't prioritise video.

IPad Air display refresh rate for full screen movies?

Similar Messages

Maybe you are looking for