IPad air ends in recovery mode after update to 7.0.6
After I get my next new iPad air I did a restore to my latest backup which works fine.
After That iTunes mentioned to update to 7.0.6 which I did....
And this ends in a recovery mode (I see just the cable and iTunes symbol on the screen ).... *** ! A brand new device 2hrs old !!!!
And now my question :
I starts a recovery to iOS 7.0.6. Whichs fails (with my white MacBook & latest iTunes version)
2-3 tries but in no success.
Then I tried to start the virtual machine VMware , installed the latest iTunes & uses the same ipsw file I used with the MacOS.
And this works ....
Nevertheless I got my new iPad back up running but really : what is this for a situation ??
And what I just a normal user with not experience faces this issue after bought a new apple device ???
Did somebody have a same experience with the and may a solution for me - just in case I need to recover another of my apple units
Thanks in advance
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Similar Messages
-
Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1
Hi Everyone,
my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
Ive tried all that I can including the tips given in the apple forums and internet. Please help.Hello soccerlime,
Thanks for using Apple Support Communities.
The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked. Please take a look at the information below to help resolve this error.
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Resolve iOS update and restore errors
Take care,
Alex H. -
IPad Air stuck in recovery screen after update. No reset possible
Hello everyone,
I have searched the community for an answer but nothing fits really.
There are some threads regarding problems with the update to iOS 8.1 and screens stuck in recovery mode, but none of the suggested solutions work for me and I am really becoming desperate.
First of all, I backed up my iPad through iTunes (I have a PC).
Then I tried to update my iPad to IOS 8.1 through iTunes. During the update the message "an error has occured (3014)" appeared. I was prompted to set my iPad to recovery mode. So I clicked the butoon for this and after it was supposedly finished, the message "an error has occured (3014)" appeared.
So, i cannot update nor rest my iPad and the screen is stuck in "connected to iTunes" screen. I tried every possible reset (soft and hard) with no avail. I haven't used any thrird party software like tiny umbrella nor is my iPad jailbreaked or somesuch.
Please help me
Thanks in advance
LukeConnect your device to your computer, you will probably have to reset it there. You could then update it using your computer then try syncing everything back on to your device.
-
My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Our iPad is stuck in recovery mode after attempting to update.
Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.
It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
Reiboot isn't even working. considering trying DFU mode. no idea if that will even help. -
please help, my ipad mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode
Try a Reboot press & hold menu button & power button hold both down until you see Apple Logo you will not lose any data. But you may need to do this more than once. I never use PCs for software upgrades or downloads I always use wifi had no problems with iOS 8.1 B sydd
-
My ipad is in recovery mode after updating software
last night now will not start up,
I tried holding down start/sleep button apple logo comes up for a second then disappears
I plugged it into laptop and its now in recovery mode, which I don't want
how do I get it out of recovery mode without losing everythingIf you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
iOS: Apple logo with progress bar after updating or restoring from backup
http://support.apple.com/kb/TS3681
Cheers, Tom -
My ipad 3 is stuck on recovery mode after update 6.1
I need help? My ipad is stuck on recovery mode after trying to update to 6.1
iPad Recovery Mode = http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
Iphone in recovery mode after update to bug fix on IOS 7
Iphone 4 has gone into recovery mode after updating a bug fix on IOS 7. Is there any way to fix it without having to restore?
No.
http://support.apple.com/kb/ht1808
1. Turn off device
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to device
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected the device in recovery mode"
8. Use iTune to restore device
Note: You need to be patient and repeat the above many times to recover your device
Here's a link that discusses recover mode: http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm -
Iphone 6 plus struck in recovery mode after update to 8.1
iphone 6 plus struck in recovery mode after update to 8.1
i updated my iphone 6 plus to 8.1 from 8.0.1 and its struck in recovery mode. inspite of restoring it again and again i get error 53.. im struck in the recovery loo. kindly help me..Hello arunmuthuvel,
The article linked below details a whole host of information and a number of troubleshooting steps that can help get your iPhone restored.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/en-us/HT201210
Cheers,
Allen -
How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating from iOS 8.0.1 to iOS 8.0.2?
In you case, the only way is to use data recovery app to get back your lost photos, so the chance is uncertain. It depends on how smart the app it's. The good news is that most of the apps allow you to try them out. You can test them out by yourself. The steps are:
Install data recovery app on your computer
connect your iPhone and allow the app scan iphone
display scanning result
choose local folder to store recovered items
You can choose to recover your photos from local disk, iTunes backup or icloud. More details can be found out here. -
Help!!! iPhone in recovery mode after update!!
My iPhone went into recovery mode after updating!!! It's telling me to restore but I'll loose everything ive been trying to transfer! I can't loose these photos. Please tell me there's a way to fix it???
Once in Recovery mode, personal data is invariably lost.
It is recommended that personal data should be backed up often. -
HT4623 Stuck in recovery mode after update. What do I do?
Stuck in recovery mode after update. What do I do? Tried holding both buttons and releasing after screen goes black. Returns to recovery screen.
Hi there Rosie Bud,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
https://support.apple.com/kb/ht1808
-Griff W. -
my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?
Read this
http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html -
my ipad mini is in recovery mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.
Maybe you are looking for
-
XSQL servlet behave strange in Websphere 5.1 but not in Jboss/tomcat
Hi, we have been using XSQL Servlet (come with 9i) in jboss for a few years without any problem. (The oracle database is 10g, but I don't think this is related since the XSQL use jdbc connection.) Recently we try to migrate the app server to webspher
-
HT1976 No service problem in my Iphone 5 and its new
I have a new ipohone 5 and allways have a no service problem
-
How latest version of fw 7.2.0 released before 7.1.7.f for T5240
Hi Experts, There is some confusion related to firmware vesion of T5240(Maramba). 7.2.0 -->Dec,23,2008 7.1.7.f --> FEb,9,2009 {font:Arial}{size:2px}{size}{font}{font:Arial}{size:2px}{size}{font} 7.2.0 --> sunsolve.sun.com/search/document.do?assetkey=
-
Issue with sys_connect_by_path
Hi all, Let me preface this post with I'm new to Oracle, using 10g, and mostly a self taught SQL person so it's not my strong suit. The overall goal is I'm trying to find folders within an area of our document management system that haven't been touc
-
How to view all transactions that all users have access with in a year.
Hello Does anyone know if they is a report that shows all users and the transactions they have used within a year? I have tried STAT3 and STAD and also SM20 however this does not give me all the users and their transactions used. I would be greatful