IPad Air is stuck in Dfu mode and iTunes does not recognize
Hello while i was restoring my ipad air and it wasn't going on so i disconnected my ipad air while "restoring" and it was in Recovery mode and i tried restore it again and it gaved me error 2005 and i put in dfu mode and tryed it again and it gave me same error 2005 and i tried disconnecting usb cable and connect again and then iTunes didn't recognize my iPad Air what can i do?
Hey Ozan274,
Thanks for the question. If your iPad is not recognized in iTunes while in recovery mode, follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
While you should follow all of the steps in the article, the applicable information is located in Step 5, sub-section titled “If the device is not recognized while in Recovery Mode”
I also see that you are experiencing error 2005, which may be the root cause of your main issue. For more information, see this article:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
- Use another USB cable.
- Plug your cable into a different USB port on your computer.
- Try a different dock connector (or no dock).
- Add (or remove) a USB hub between your device and computer.
- Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Thanks,
Matt M.
Similar Messages
-
I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected. Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes. I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success. ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes.. Please help!
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
My iphone 4s is stuck on recovery mode and itunes does not recognize it at all.
Hi. Last night I left it updating 5.1.1 from 5.1 when I was going to bed. And at night I heard usb noise and woke up. iTunes had an error, I did not remember what is written there because I was sleepy. I think it was like 1612 error but I'm not sure. There were an itunes logo and an usb wire on the phones screen. And I cant get rid of it. iTunes does not recognize the phone in "DFU mode" too. I need the phone today and I dont know what to do. Please help me. Sorry if my english is bad.
itunes: last version
os: windows 7 64 bithttp://greggjturner.com/download.html
This program got me out from the loop. I dont know sharing it here is legal or not. But it is the solution for this problem. However I'm still wondering why I faced a problem like that. Is an update is that hard? -
My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me
I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
Thanks,
Nathan. -
My iphone is stuck in emergency call mode and itunes does not recognize my phone
my iphone is stuck in emergency call mode and itunes does not recognize my phone
NVM... broke down and called Apple Care. Pressed on/off button and held it for a few minutes before pressing home button. In recovery mode, but at least it is doing something now!
-
DFU Mode and iTunes does not Restore only Update
So we terminated one of our employees and he put a lock on the company issued phone. I've put the phone in DFU Mode so I can just restore it through iTunes but iTunes keeps trying to Update before the restore then saying it cannot because the device is locked. How do I get iTunes to ONLY do the restore and not the update?
You mean a passcode lock? Try recovery mode.
Have iTunes up and running on the computer. Make sure it has the most recent update (11.0.4, I think)
Turn off the iPhone. Connect the USB cable to the computer, but not the iPhone.
Press & hold down the Home button on the iPhone, then plug in the cable to the phone. Wait until you see a picture that has the iTunes logo, an arrow, and a picture of the cable. Then you can let go of the Home button.
iTunes should detect a device in recovery mode. The rest is pretty straightforward, although this article shold help. http://support.apple.com/kb/ht1808
Be advised, everything on the phone will be wiped. It will be like new, no user data.
There's no way to avoid putting the newest iOS on the device, though. Not sure if that matters to you. -
i plugged in my ipod touch last night to update to latest version and there was some sort of problem and it said i needed to restore so i did. And now it just keeps saying it can not find my ipod. it used to say "crystal's Ipod" now it says "ipod" on the left. HELP!
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
I was downloading the latest OS and it started to install. Before I knew it the compputer said there was problem installing it, the itouch was put into safe mode and now itunes doesn't see the itouch. I have tried to reinstall itunes. I have restarted the itouch. And nothing I have tried has worked.
No knowing what safe mode is, all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).
-
Idad in reset mode but itunes does not recognize the device.
I have my ipad in restore mode but itunes does not recognize the device. What can I do to reset the ipad?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Cheers, Tom -
Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!
- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store. -
Ipod was corrupted i restored it now windows and itunes does not recognize
one day i plugged my 80g classic in to charge and sync. itunes diagnosed my ipod as corrupted and said please click restore,so i did now my windows computer and itunes does not recognize it at all i have a new 1g shuffle and it works fine. wat do i do with the classic cause i miss the space and it still turns on and everything. Help!!!! Please
Start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Also this recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
Cheers,
Patrick -
After downloading iOS 6 ipod is flashing apple and itunes does not recognize
I tried to download the new iOS 6 for my ipod and now the screen is just white when I tried to reboot it, now it flashes the apple and white screen and itunes does not recognize it. help?? it is only 8 mos old
- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store. -
I have an ipod touch and Itunes does not recognize device. What can I do?
I have an ipod touch and Itunes does not recognize device. What can I do?
See:
iOS: Device not recognized in iTunes for Windows -
Windows and iTunes does not recognize
yada, yada...
I tried the Rs, but my new computer and iTunes does not recognize my shuffle. Can someone give me basic steps to correct this? Shuffle was previously 'synched' with another iTunes library and I don't want to erase my currently uploaded music. Help please!I don't know if this is the same problem, but I cannot get my I-pod Nano to sync or have I-tunes recognize it. It is a connector problem, and this is my second Nano to do it within nine months. Apple wants $32 to send it in to be repaired once again. I am irritated beyond belief. I took my Nano in to an IMAC store and they confirmed that it was a connector problem. They could not send it off nor repair or replace it though. So I've had two Nano's since Christmas have this problem.
I would suggest that you try another device (shuffle) on your computer to ensure that it's not your computer (our other I-pods worked on the computer) and/or take it in to an IMAC store where they will see if it connects to one of their computers.
Right now I think Apple products are basically crap...
Maybe you are looking for
-
Facebook share & URL LINTER can't get the information of my WebSite
I'm very frustrated because I can't make my iWeb Page correctly shared on facebook. I have worked a lot on that page, and included in it interesting html codes; I even have used iWeb SEO Tool to added some title tags. However, when I try to share any
-
Cannot connect to anyone. When I first got laptop it used to work all the time until I started recieving this error message. I gave my laptop full internet access and rights through my firewall. Can anyone help? error message... Date/Time: 2007-07-02
-
The application quit unexpectedly how can i retrieve it?
my iwork application just quit unexpectedly i already re installed the iwork dvd but still it wont work.. help
-
Unable to access nested managed bean property in JSF 1.2.9
In an old version of JSF, namely 1.2-b20-FCS from April/21/2006, I could access nested properties of a managed bean. So I had a managed bean OuterBean, and in JSF I could write <h:inputText value="#{outerBean.innerBean1.propertyA"/> The Java class Ou
-
Macbook won't boot past grey screen with Apple logo and spinning wheel.
For some reason, after about 1 year and 10 months of owning my Macbook, it decided this morning not to load past the grey screen with the Apple logo and spinning cog/wheel. I used it for a couple of hours beforehand, and it was working fine. Software