Ipad air rebbot with blue screen after ios8 installed

After I have installed ios8 on my iPad Air 64 GB Wi-Fi I get the problem the device reboot suddenly after get a blue screen. The problem happens with any application I am using. How could fix it?

Hi, HPucci.  
Thank you for visiting Apple Support Communities. 
Here are some troubleshooting steps that I would recommend going through when experiencing this issue. 
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
Jason H. 

Similar Messages

  • Ipad air boots with blue screen

    my ipad air boots 4 5 times with blue screen as i use my wifi.....and it happend as i updated to ios 8. And i'm noticing from few days. I need the solutions

    Hi Air.sam, 
    Welcome to the Apple Support Communities!
    I know that situations like this can be very frustrating. There are some very good troubleshooting steps that I would recommend in this situation however. Please use the attached article and troubleshooting steps to help you resolve the situation. 
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards, 
    Joe

  • TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

    My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

    Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple. 

  • Problem with iOS 8 in ipad air since update, "blue screen with restart"

    Problem with iOS 8 in ipad air since update, "blue screen with restart"

    I have exactly the same problem, i´m tired of looking for a solution but even here there is no answer... i don't know what else do. the blue screen and restart is more annoying every time i use it.

  • IPad Air - 128 gb,blue screen,shuts down,restarts , why ?

    Have an iPad air - 128 Gb, - iOS 8.0.2 installed
    while  using safari a blue screen appears,then the iPad shuts down ,and restarts by itself
    action taken
    - cleared cookies,
    - cleared browser history,
    - reset to earlier settings which is currently running I.e iOS 8.0.2 , because the blue screen started after installing updates
    but now it still continues,
    is it a hardware problem or a software problem?
    one month back similar thing happened Apple replaced with this pad , and this pad seems to have the same problem

    I tried to recreate your occurrence, could not recreate it.
    The Air monitor feed cable is on the RIGHT side, so its extremely unlikely (near impossible) it could be EMI or RFI
    There should no logical reasoning behind same.
    However the IO board is on that side, but the Ipad mini even with a tri-field meter puts out next to nothing
    Contact Apple for in shop diagnostic / examination

  • Can't see desktop with blue screen after login

    Hi
    we have a server 2008 ent SP2 that sometimes when use remote desktop or via vmware console to access this server, after login we got blue screen and can't see desktop. after force reboot it recovery.
    From application log, we  find some error: 
    Description (Event ID:  1000):
    Faulting application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, faulting module msshsq.dll, version 7.0.6002.18255, time stamp 0x4be071d5, exception code 0xc0000005, fault offset
    0x000063fd, process id 0x1300, application start time 0x01cf9a43236d46dd.
    Description(Event ID:  9009):
    The Desktop Window Manager has exited with code (0x40010004)
    Description(Event ID: 1530):
    Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.  
     DETAIL - 
     1 user registry handles leaked from \Registry\User\S-1-5-21-249263827-1212357926-315576832-391740:
    Process 3812 (\Device\HarddiskVolume1\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-249263827-1212357926-315576832-391740

    Hi,
    In general, event ID 1530 means there are some data in the user profile are still be accessed when the user log
    off from the Terminal Server. Please check if any of the data is still remained in the user profile supposed to be deleted. You can use Process Monitor or Process Explorer in order to find the software which is using the data and find the solution. If there
    is no such data remained, the Windows have possibly stopped the process and deleted the data when log off. In such a case, you can ignore the Event 1530.
    In addition, I recommend running SFC /Scannow from an elevated command prompt and check a dump file for Windows
    Explorer under C:\Localdumps.
    Besides, you can also download
    Autoruns to troubleshooting Explorer issues. Please run Autoruns as Administrator, go to Options menu, Filter, select Hide Microsoft Entries and Ok. After that, open the Explorer tab,
    and you will see all DLL that are running inside File Explorer, so start disabling and testing if Explorer crashed.
    Furthermore, the KB below may be helpful:
    http://support.microsoft.com/kb/961038/en-us
    Best regards,
    Susie

  • T60: Abort with Blue Screen (After Lenova Update)-- 79ETE0WW (2.20)

    All
    I need Urgent help. I run Lenova updates and it downloaded BIOS update 2.2 79ETE0WW. Plus other Driver Updates. After that I started gettin BLUE Screen Errors.
    I have updated ATI Driver also.
    STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000)
    Any Hint how should start solving this.
    I have XP SP 2
    PG
    Message Edited by i080927 on 02-15-2008 07:22 AM

    007India,
    You are wise to do research in advance of any major purchase.   Regardless of manufacturer , be it Lenovo, Acer, Dell, or HP, people tend to post their problems to the internet rather than their successes.  How many people take time to post everyday saying "everything is going great!" ?
    Yes, there has been a lot of discussion about blue screen issues.  Some caused by turbo memory drivers, and if you check the forum there are updates and fixes for that.  Some could be OS related, and some may relate to specific drivers.
    Some of your broad assertions, like being forced to use only a single Dimm, are perhaps a bit over generalized.  The issue you are referencing is related only to the T61P model, and there is no limitation to only using one memory module.  Some customers have discussed lockups while gaming in 3D games with dual dimms, but service has been able to resolve these when noted.  We are finalizing our investigation on this issue and resulting resolution.  There are no similar issues with rest of the T series, or any X or R series systems.
    The choice of whether to apply updates is certainly up to the individual.
    Yes, there are stories posted about customer service, but I would suggest that you count them, and consider them against the hundreds of thousands of customers WW.   Again, people tend to post about the exceptions or the problems rather than saying everything is just fine.  We do work to resolve issues when they arise.
    Once again, I think you are wise to thoroughly evaluate products you are interested in, and the companies that produce them ahead of making your purchase.   I hope you are pleased with whichever system you purchase.
    Best regards
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Mac OSX 10.6.7 boot very slow with blue screen after clean reinstall ...

    ... with the following log:
    6/12/11 6:10:18 PM          com.apple.launchd[1]          *** launchd[1] has started up. ***
    6/12/11 6:12:07 PM          com.apple.launchd[1]          (com.apple.xprotectupdater[14]) Exited with exit code: 255
    6/12/11 6:14:00 PM          com.apple.launchd.peruser.501[105]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    6/12/11 6:14:26 PM          com.apple.launchd.peruser.501[105]          (com.apple.Kerberos.renew.plist[122]) Exited with exit code: 1
    6/12/11 6:14:38 PM          com.apple.WindowServer[88]          Sun Jun 12 18:14:38 idas-MacBook-Pro.local WindowServer[88] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Can anyone help to solve this problem?

    If you see a blue screen at startup
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html

  • IPad Air Apps will not update after ios8.0.2

    I Now have 17 apps that will not update after I updated my iPad Air to 8.0.2. What gives?  Some apps are stuck in mid update, so i can't use them. My wifi works. I have restored my iPad twice using iTunes. I have plenty of empty storage. I have reset my iPad. I'm out of ideas.

    I have been having the same problem but was able to get around it by updating the apps in iTunes on my Mac then syncing my iPad to iTunes on my Mac. Certainly not an elegant solution but until Apple gets this fixed it is the only way I have found to get updated Apps.
    Tim

  • Blue screen after fresh install 8.1

    I keep getting errors, of blue screen right after install...And after all that typing i get this message... that I can't post links/images... so Here I post a log.Log Name:      SystemSource:        Microsoft-Windows-Kernel-PowerDate:          20-2-2014 21:34:14Event ID:      41Task Category: (63)Level:         CriticalKeywords:      (2)User:          SYSTEMComputer:      AWMDescription:The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.Event Xml:<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />    <EventID>41</EventID>    <Version>3</Version>    <Level>1</Level>    <Task>63</Task>    <Opcode>0</Opcode>    <Keywords>0x8000000000000002</Keywords>    <TimeCreated SystemTime="2014-02-20T20:34:14.758130700Z" />    <EventRecordID>347</EventRecordID>    <Correlation />    <Execution ProcessID="4" ThreadID="8" />    <Channel>System</Channel>    <Computer>AWM</Computer>    <Security UserID="S-1-5-18" />  </System>  <EventData>    <Data Name="BugcheckCode">239</Data>    <Data Name="BugcheckParameter1">0xffffe001fe921580</Data>    <Data Name="BugcheckParameter2">0x0</Data>    <Data Name="BugcheckParameter3">0x0</Data>    <Data Name="BugcheckParameter4">0x0</Data>    <Data Name="SleepInProgress">0</Data>    <Data Name="PowerButtonTimestamp">0</Data>    <Data Name="BootAppStatus">0</Data>  </EventData></Event>
    Above you can see the log name, not sure if you can read it, I've put it in a code block.
    I thought it was my RAM that was default/bad /corrupt. So I bought new ones, but the problem keeps ocuring. I re-installed my windows 8.1 using new RAM, but it keeps giving me "windows/freeze lag" and then blue screen.
    See logs.
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          20-2-2014 21:24:04
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      AWM
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Event Xml:
    <Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>3</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2014-02-20T20:24:04.336182100Z" />
        <EventRecordID>253</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>AWM</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">239</Data>
        <Data Name="BugcheckParameter1">0xffffe0007c3e1080</Data>
        <Data Name="BugcheckParameter2">0x0</Data>
        <Data Name="BugcheckParameter3">0x0</Data>
        <Data Name="BugcheckParameter4">0x0</Data>
        <Data Name="SleepInProgress">0</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
        <Data Name="BootAppStatus">0</Data>
      </EventData>
    </Event>
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          20-2-2014 19:45:24
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      AWM
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Event Xml:
    <Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>3</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2014-02-20T18:45:24.960461300Z" />
        <EventRecordID>218</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>AWM</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">0</Data>
        <Data Name="BugcheckParameter1">0x0</Data>
        <Data Name="BugcheckParameter2">0x0</Data>
        <Data Name="BugcheckParameter3">0x0</Data>
        <Data Name="BugcheckParameter4">0x0</Data>
        <Data Name="SleepInProgress">0</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
        <Data Name="BootAppStatus">0</Data>
      </EventData>
    </Event>
    My set up:
    Processors AMD FX-6300 Black Edition
    motherboard/Moederborden ASRock 970 Extreme3 R2.0
    Memory intenral/ Geheugen intern Crucial Ballistix Tactical BLT2C4G3D1608ET3LX0CEU
    GPU/ Videokaarten MSI R9 270X GAMING 2G
    Internal Driive/ Interne harde schijven Seagate ST1000DX001, 1TB
    PC case/ Behuizingen Corsair Carbide 200R Closed
    PSU / Voedingen Seasonic S12II-Bronze 430W

    I keep getting errors, of blue screen right after install...And after all that typing i get this message... that I can't post links/images... so Here I post a log.Log Name:      SystemSource:        Microsoft-Windows-Kernel-PowerDate:          20-2-2014 21:34:14Event ID:      41Task Category: (63)Level:         CriticalKeywords:      (2)User:          SYSTEMComputer:      AWMDescription:The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.Event Xml:<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />    <EventID>41</EventID>    <Version>3</Version>    <Level>1</Level>    <Task>63</Task>    <Opcode>0</Opcode>    <Keywords>0x8000000000000002</Keywords>    <TimeCreated SystemTime="2014-02-20T20:34:14.758130700Z" />    <EventRecordID>347</EventRecordID>    <Correlation />    <Execution ProcessID="4" ThreadID="8" />    <Channel>System</Channel>    <Computer>AWM</Computer>    <Security UserID="S-1-5-18" />  </System>  <EventData>    <Data Name="BugcheckCode">239</Data>    <Data Name="BugcheckParameter1">0xffffe001fe921580</Data>    <Data Name="BugcheckParameter2">0x0</Data>    <Data Name="BugcheckParameter3">0x0</Data>    <Data Name="BugcheckParameter4">0x0</Data>    <Data Name="SleepInProgress">0</Data>    <Data Name="PowerButtonTimestamp">0</Data>    <Data Name="BootAppStatus">0</Data>  </EventData></Event>
    Above you can see the log name, not sure if you can read it, I've put it in a code block.
    I thought it was my RAM that was default/bad /corrupt. So I bought new ones, but the problem keeps ocuring. I re-installed my windows 8.1 using new RAM, but it keeps giving me "windows/freeze lag" and then blue screen.
    See logs.
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          20-2-2014 21:24:04
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      AWM
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Event Xml:
    <Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>3</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2014-02-20T20:24:04.336182100Z" />
        <EventRecordID>253</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>AWM</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">239</Data>
        <Data Name="BugcheckParameter1">0xffffe0007c3e1080</Data>
        <Data Name="BugcheckParameter2">0x0</Data>
        <Data Name="BugcheckParameter3">0x0</Data>
        <Data Name="BugcheckParameter4">0x0</Data>
        <Data Name="SleepInProgress">0</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
        <Data Name="BootAppStatus">0</Data>
      </EventData>
    </Event>
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          20-2-2014 19:45:24
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      AWM
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Event Xml:
    <Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>3</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2014-02-20T18:45:24.960461300Z" />
        <EventRecordID>218</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>AWM</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">0</Data>
        <Data Name="BugcheckParameter1">0x0</Data>
        <Data Name="BugcheckParameter2">0x0</Data>
        <Data Name="BugcheckParameter3">0x0</Data>
        <Data Name="BugcheckParameter4">0x0</Data>
        <Data Name="SleepInProgress">0</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
        <Data Name="BootAppStatus">0</Data>
      </EventData>
    </Event>
    My set up:
    Processors AMD FX-6300 Black Edition
    motherboard/Moederborden ASRock 970 Extreme3 R2.0
    Memory intenral/ Geheugen intern Crucial Ballistix Tactical BLT2C4G3D1608ET3LX0CEU
    GPU/ Videokaarten MSI R9 270X GAMING 2G
    Internal Driive/ Interne harde schijven Seagate ST1000DX001, 1TB
    PC case/ Behuizingen Corsair Carbide 200R Closed
    PSU / Voedingen Seasonic S12II-Bronze 430W
    Please update your powersupply to a 1000 watt and you good to go, don't be so cheap, a 400wtt for a monster like that. jeez man are you on something.
    Good psu is the most important part of a computer
    You do not need to buy a 1000 watt power supply. Best way to determine how much PSU power you need can be calculated here:
    http://www.thermaltake.outervision.com/
    My guess would be to get one around 650-750 watts. Having more is always nice because it leaves you room for growth but also remember that technology is improving everyday and hardware is utilizing less power than previous editions and it keeps getting better.
    I personally would only recommend getting a 1000 watt PSU if you are doing serious overclocking, and/or running more than one high end gpu such as SLI or CrossFire.
    I have a system right now that I'm using which is i7 4770k, 16gb ram, 560Ti, SSD, and one mechanical HD, and I'm using a 600 watt PSU on Windows 8.1. The system is stable and never has problems with power.
    gluck
    BS, a gamer needs all the power we need more so when I over clock.
    Edit: I had a high Q PSU 750watt lasted 5 months playing bf3. I had 100 thousand minutes playing in 5 months. The psu over heated. When I took it apart to lookscey, the transformers were finished. If you plan on overclocking like I did you will need the
    higher watt psu. Don't fall into I told ya so.
    I was then running subzero temps so my overclocking was extreme. 3.5 Ghz running 5GHZ, Memory to voltages all over clocked. Video OC to its max, hard ware flashed OC'ed.
    If your going to be a pencil pusher with your computer then do whatever but he said a gaming computer
    The COUGAR GX V3 High-End PSU

  • Stuck on blue screen after re-installing OS X Panther

    Ok, iTunes installation was getting stuck at 53%. So ran the Check Disk Utility from the OS X Panther CD. I got the message...
    So then I decided to do a clean install of OS X Panther. I thought all was going well until now. My ibook is stuck on this blue screen with a rotating colorwheel mouse cursor. It eventually turns into an arrow but then goes back to a colorwheel...
    So now what? Is buying another program like DiskWarrior my only option? Keep in mind that the hard drive was replaced the last week I had Apple Care Protection. And the 90 warranty on the replacement hard drive is over.
    Here are the details of my iBook...
    M8602LL/A
    http://support.apple.com/specs/ibook/iBook16VRAM.html
    Thank you
    M8602LL/A   Mac OS X (10.3.9)   640MB RAM

    Well, I did the pram thing. That just brought me to a gray screen with the gray apple. And that's it. What I did notice about the info on the blue screen was that it was checking for fonts. So this time, I re-installed with all of the font options checked. Waste of space, but whatever.
    Installation completed. I even got to the repetitive registration form. (hmmm, let's see, my ibook has been registered about 20 times.)
    After I get to the desktop, well, that's it. I click on software update and it bounces and then stops. I get into the System Prefs and click Software Updates and apparently my copy of Panther is up to date. Ya right.
    So then I click Safari in the Launcher. nothing
    So then I go into my hard drive/application to get to Safari. and um, nothing. Well, actually I get an endless spinning scroll wheel.
    So I try the PRAM thing again. And now I am stuck at a grey screen with a grey apple!!!!!!!!!!!!!!
    I am ready to break this thing in half like I did to a cell phone once.

  • Envy 15t 3200 blue screen after graphics install

    Hi everyone,
    I'm an IT professional working on a client's HP Envy 15t-3200 notebook PC (Win 7 x64, Intel i7, AMD 7700 series)
    He said (he thinks) after installing a recent windows update, it started blue screening on him with a graphics error.
    He restored his PC to factory install, and it was working fine until he installed windows updates and the graphics drivers again, receiving the same blue screen graphics error.
    I picked up his laptop. I installed a slipstream of windows 7 that I created. Everything worked fine - as soon as I installed his graphics drivers.
    First, I had installed the AMD drivers (from AMD, not HP). I thought everything was working fine, until I checked the device manager and saw that the AMD graphics were being disabled, and the laptop was reverting to the generic graphics driver. I also tried the older driver offered on HPs support page.
    I uninstalled the AMD graphics, and installed the Intel graphics. As soon as they were installed, upon restarting I received the same original blue screen error and had to result in booting to safe mode and performing system restore.
    When I install the AMD graphics without installing Intel graphics, it reverts itself to Generic graphics. The AMD graphics adapter shows a Code 43 in the device manager, stating that the device has stopped working because it has reported problems.
    I played around with different versions of AMD graphics which did not resolve the issue, and I installed different versions of the Intel graphics, which still caused a blue screen.
    The PC is working ONLY with the generic graphics drivers, which doesn't work for what my client wants to be able to do (gaming).
    I found this - http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04121863&tmp_task=solveCategory&cc=us&dlc=en&la...
    on the troubleshooting page for this notebook, and tried using this solution which also did not resolve the issue.
    I've checked temperatures of the laptop and nothing is anywhere near overheating.
    I don't know what else to try. My client said he will live with it and just not use it for gaming anymore, but that is not good enough for me - I've offered to continue finding a resolution for him free of charge.
    Any help would be very appreciated, this is extremely annoying
    This question was solved.
    View Solution.

    Reformatting the hard disk and installing the OS again may or may not help.
    I would consider rolling back to a system restore checkpoint where the issue all began, testing it and if it works turn off Windows updates on the notebook.
    Unfortunately, this notebook model requires replacing the system board. I wish I had better news for you on this, but I do not. 
    You can see that in the Maintenence & Service guide.
    The larger notebooks have the graphics adapter module as a seperately replaceable unit.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Raid0 blue screen after W7 install 890fxa-gd70

    Im having a bit of an issue.  I have a pair of WD640gb drives and i wanted to go raid0
    So i set them up got stripping set and everything seems ok.
    I actually install win7 x64 premium just fine but for some reason i can only use the w7 32 drivers.
    when the computer does the first restart after the install, it blue screens.
    Any help would be much appreciated.

    RAID 0 and Windows 7 has been an issue before here in the forum.
    If I remember correctly, seldom do, someone found usable drivers somewhere. H-l of a search, but you might try the Search feature, to the right.

  • Frequent IPad 32 GB air crash with blue screen

    AAfter upgrading to ios 8 my iPad is not in usable condition... Not sure when it will crash......
    hope Apple fixes the issue early....
    is there a way to return to ios 7

    Hi .
    Have you  tried any maintenance?
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a restet.

  • IPad Air stuck in recovery screen after update. No reset possible

      Hello everyone,
    I have searched the community for an answer but nothing fits really.
    There are some threads regarding problems with the update to iOS 8.1 and screens stuck in recovery mode, but none of the suggested solutions work for me and I am really becoming desperate.
    First of all, I backed up my iPad through iTunes (I have a PC).
    Then I tried to update my iPad to IOS 8.1 through iTunes. During the update the message "an error has occured (3014)" appeared. I was prompted to set my iPad to recovery mode. So I clicked the butoon for this and after it was supposedly finished, the message "an error has occured (3014)" appeared.
    So, i cannot update nor rest my iPad and the screen is stuck in "connected to iTunes" screen. I tried every possible reset (soft and hard) with no avail. I haven't used any thrird party software like tiny umbrella nor is my iPad jailbreaked or somesuch.
    Please help me
    Thanks in advance
    Luke

    Connect your device to your computer, you will probably have to reset it there. You could then update it using your computer then try syncing everything back on to your device.

Maybe you are looking for