IPad air won't connect to Bluetooth speaker?

My new iPad air will not connect to my Vizio Bluetooth speaker.  When I put both devices in discover mode, the speaker is listed on the iPad, but will not connect?  The speaker connects just fine to my iPhone, or to my older (original) iPad.  I have re-booted the iPad, and powered down(unplugged) the speaker, but no help. 

Bluetooth on my iPad air won't find my android phone, but the phone has apparently paired with the iPad. They just won't talk. Same problem with my wife's iPad 4, won't discover anything at all! I know that Apple is known for not communicating with non Apple products but this is ridiculous. Any ideas? Thanks ;)

Similar Messages

  • IPad air won't connect to internet

    new air,  128 gb.  Unusable.  Won't connect to wif with consistencyi.  Won't load on new mail unless  I power off first.  Even then,  it takes forever despite ultra high speed connection. (old iPad works fine). Can't navigate to links from sites or between pages,  will say "server not responding.  Can't even move within pages of a site.
    what do I do?  900$ down the drain?
    gail hill

    You do know it comes with a 1 year warranty, right?
    Try Settings > General > Reset > Reset Network Settings
    If that doesn't work you can try a Restore from your Backup and then Restore as new if that fails. And if none of that works use your warranty and get it serviced.

  • When I try to use my JBL speaker, it won't connect to Bluetooth at all with my iPad Air

    My iPad Air won't connect to Bluetooth so I can use my iPad Air and JBL speaker. I keeps saying it is searching for devices.....any idea what to do. I'm using wi-fi

    I suspect it won't pair with your iPad, because it's paired with your phone, even though the phone is off. Do you have the instructions for pairing the speaker?  If you don't, google them and see if the device can be paired with multiple devices.

  • I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via bluetooth whenever I try even though both shows that the devices are discoverable. I need help!

    I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via Bluetooth whenever I try even though both shows that the devices are discoverable. I also tried connecting them with my Bluetooth enabled laptop but it also didn't worked. Because of the Bluetooth not working I also can't enable airdrop.

    What model iPad?
    What model computer and OS version>
    AirDrop requires:
    What you need
    To share content with AirDrop, both people need one of these devices using iOS 7 or later, or a Mac with OS X Yosemite:
    iPhone 5 or later
    iPad (4th generation or later)
    iPad mini
    iPod touch (5th generation)
    You also need to turn on Wi-Fi and Bluetooth. If you want to share with your contacts, sign in to your iCloud account.
    Learn more about using AirDrop to share with people using a Mac with Yosemite.
    Use AirDrop to wirelessly share content - Apple Support
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    *The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
    For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
    Otherwise you need an app to pair via BT one iOS device to another iOS device. There may be apps that allow pairing with a Mac computer. The iOS devioces do not have the BT profiles necessary natively to pair with a computer or another iOS device except for AirDrop

  • HT204387 My iphone4 and my iPad mini won't connect via blue tooth just continues to search

    My iphone4 and my iPad mini won't connect via blue tooth just continues to search

    What are you trying to do?
    The Bluetooth is meant for earplug, headset, keyboard, car hands-free set, and speakers.
    You need a 3rd party app to do BT file transfer or other functions between iDevices.

  • My ipad 2 won't connect to internet

    My ipad 2 won't connect to wi-fi after installing new modem/router. It says connected in settings but " no server connection " message appears when I try to go on internet. All other devices work fine.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can I link my iPad Air and iPhone 4s via Bluetooth, please?  They haveBluetooth turned on but will not find each other.

    How can I link my iPad Air and iPhone 4s via Bluetooth, please?  They both have Bluetooth turned on but will only search and find nothing. The words 'Now Discoverable' appear under the search panel.

    for the devices to find each other via Bluetooth you would need to turn on the iPhones cellular hotspot and then let them search for each other. As far as I have found this Bluetooth connection is only for connecting the iPad to internet via iPhones data plan.
    To transfer photos you could setup a new photo stream and put the photos you want transferred in it. When it syncs to the iPad you can save directly to the camera roll and delete the photo stream. You may also be able to delete the photos old photos and re-add them to photo stream so it looks like they are new to the iPad.

  • Macbook air won't pair to bluetooth

    My macbook air won't pair with bluetooth capable devices.  It'll show that my iPhone 5 is paired but for error reasons won't connect.  It used to be able to connect to bluetooth no problem...but after a harddrive crash on a new macbook air, it hasn't worked since.  Any help would be greatly appreciated.

    You seem to want to argue.  I KNOW there is no limit to the number of devices...the POINT is that if it was paired with another computer, it NEEDS to be deleted from that computer.
    Incidentally, I assumed you wanted help.  If you wish to decide you already have the answer, I will not waste any more of my time.
    Barry

  • Ipad Air won't open in My Computer

    Hi,
    My Ipad Air won't open in My Computer on my PC. My Iphone and older Ipad open just fine, but my newer one won't. It shows up fine in Itunes.
    I'm trying to get on it to see about copying photos. My PC has, for some reason, converted a bunch of my photos to the .ithmb suffix and they won't open on my PC. This whole episode is baffling. Any help would be appriciated.

    Hello BHP11,
    Thank you for the details of the issue you are experiencing with importing photos from your iPad Air. 
    First, if the AutoPlay dialog box does not open, the following article suggests to check your settings:
    Import photos in Windows Vista or Windows 7
    Import photos or video from your device to your PC:
    Connect your iOS device to your computer. If the AutoPlay window appears, click "Import Pictures and Videos using Windows," then skip to step 4. If the "Import Pictures and Video" dialog appears, skip to step 4.
    If the AutoPlay dialog doesn't appear, you might need to check your settings.
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    If you are still not able to import photos, I recommend continuing with the following article:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • New iPad Air will not connect to wifi?

    New iPad Air will not connect to home wifi, but will connect to others outside my home?

    Try this:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings
    3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

  • My new Macbook air won't connect to my Vizio HDTV.

    My new Macbook Air won't connect to my Vizio VO32LF HDTV.  I bought a mini-displayport to HDMI cable to connect the two.  When I connect the cable, and switch to the appropriate HDMI input on the TV, my Macbook Air screen will flash blue for a second, and then return to normal.  The TV reports it's unable to find a signal.  I use the HDTV as my primary monitor, so I'd really appreciate some help on getting the two to place nicely together!

    Cp,
    Thanks for the reply. However, it appears that the issue is not with the hotspot, but with the network settings in the MacBook Air as every other device I have (including non-Apple devices) will connect to the iPhone hotspot. Another symptom is that my MacBook Air can find my iMac (and other network devices) on my wireless network, but the iMac can't find the MacBook Air.
    KDR

  • I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

    I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

    Wmorlac wrote:
    I have the new IPad and can't connect via bluetooth to any of my apple devices...
    Correct... See Supported Bluetooth Profiles Here...
      http://support.apple.com/kb/HT3647
    Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

  • My iPad air won't charge at all and I don't know if it's the charger or port help!i have had a new port put in before and it worked fine after but it's not working now! I have spent way to much trying to fix this thing one problem after another?

    My iPad air won't change at all, and I don't know if it's the port or charger cable it is charging normally but it just won't charge. I have had a new port put in before after a charger getting stuck in there but it worked fine after and now it's not working at all! I don't know if maybe it's the charger getting old but I have spent far too much money on this iPad then I should have as it's one problem after another witch is causing me lots of stress.

    Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
    How are you charging it? its's best charged plugged into the wall  not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall.

  • My ipad air won't charge. I am using the correct cable supplied with it. I have restarted it and it still won't work.

    My iPad air won't charge. I am using the cable suppied. It shows the charging icon for a split second then says not charging. I have tried re starting and nothing changes.

    Z zoozx ,
    How could Microsoft come up in a forum about an Apple problem?  We have heard for years how superior Apple products are but we've never had as many headaches and problems with our Windows PCs over the years as we have with the Apple devices we now have.  My wife has the most recent iPad and my son has the most recent ipod Touch. Earlier problems notwithstanding, the iOS 7 upgrade was horrible and hard to imagine for a device where the company controls all of the hardware and the software with no variants.  As for Microsoft, I can say I have programmed on many various platforms from PolyForth to Unix to Windows and .NET.  I think what many Apple users don't understand about Windows is the sheer magnitude of variables in making the software and all upgrades work for such a myriad array of hardware platforms and usage scenarios across an enormous number of partners and small to large enterprises.  Anyone who has worked with a large integrated system can get a sense of this.  I work in healthcare and our HIS system is rated #1 in it's class (built on a derivitive of an old MIT OS) but due to it's vast integration capabilities and the variety of usage and setup variables from site to site, it requires daily dilligence in error reporting and resolution across all of it's applicaitons.  Microsoft Windows works and integrates with a massive number of other Microsoft client and server solutions that are used by the vast majority of enterprises in the world. It's no small feat to keep the Microsoft software stack in good working order.  Of course everyone is entitled to their opinion but I wish we could past this ABM mentality that pervades online forums. I'm not sure if you've noticed but the Apple forums are jam packed with folks like yourself and me having problems with Apple hardware or software so I'm not sure where we can say one is better than the other, even if you could carve out some realistic benchmarks from which we could compare them on an even playing field. 
    With all the said, and I apologize but feel that the Anti MS anecdotes belong left long in the past, but any ideas on how we can get the supplied power cables to charge the devices they came with? I don't believe I've ever encountered a problem at the power cable level like this in which 2 cables are not working on 2 different devices. I think it points to software problems but as someone else mentioned about display settings, I'm not sure how your display settings affect the charging of a device in a non display mode. Would that suggest the thunderbolt cables are not capable of delivering enough charge to keep up with idle power consumption? 

  • MacBook Air won't connect with TimeCapsule

    I recently bought the new Time Capsule and for a while it was happily backing up both my and my wife's MacBook Airs. Then it stopped backing up my wife's computer. On investigation I find my wife's MacBook Air won't connect to the Time Capsule. When I try to select the Time Capsule as the back-up disk an error message appears: "There was a problem connecting to the server "John's AirPort Time Capsule"". I can see the Time Capsule in Finder on my wife's computer but when I click on "Connect As" I get the same error message. On my computer the Time Capsule appears in Finder as Connected, but disconnecting it doesn't make any difference to my wife's computer.
    Any help gratefully received.
    J

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Maybe you are looking for

  • Position Cursor on a specific SO line in VA01 / 02

    Hi,   I have a requirement to do some validation in the User Exit, SAVE_DOC_PREPARE for VA01 / 02. If there is a Error, I want the cursor to be positioned on the specific line item which had this error. Please note the above exit gets called the user

  • Is it possible to set lead time with reference to Inco term

    Is it possible to set lead time with reference to Inco term.I want to capture transit time in combination of Vendor & Material with reference to Inco term. Any other provision except the field of Plnd delivery time of Info record & GR processing time

  • Why is the push button sticking?

    Why is the push button sticking?

  • OAS 10.1 Apache/CGI how to change path env

    I have a oracle application server 10.1.2 installed on windows enviroemnt ((W2K) The %path% of the Windows contain a reference at a wrong perl interpreter and i remove it and restart oracle application. The problem is that now %path% is correct but o

  • Get photos on iPad in same sort order as in Aperture

    Have newest, latest OS, iOS, and Aperure and Apps on my iPad ... all current. When I setup photos in a album in Aperture then sync the album to my iPad using iTunes to the Photos App, the images are sometimes several inages are placed in a different