IPad+AirPlay vs. Pioneer VSX-1021-k

I have a 1st Gen iPad and a Pioneer Reciever purchased last week. I have the reciever connected via Ethernet and know that it works. I have the iControlAV2 app and can control the functions of my reciever via the wireless network. I bought the receiver understanding that I could play songs from my iPad using AirPlay. The problem is that the AirPlay icon is missing from the 'music' app on my iPad. I have tried the 'resets' and updates that i have found through Google. I also know that my reciever has the current firmware. SO, here is the question, can anyone help me?
Thanks in advance!

Hey big,
I had the same problem with my Pioneer VSX-1021-k and my iPhone 4s. I bought the receiver 2 months ago specifically for the air play function and other specs. I recently got my iPhone 4s, download a couple of itunes on it and play it on my iPhone. I can use the IControlAV2 apps well but when I was playing itunes on the iPhone the AirPlay icon was not showing up. I restart both the phone and the receiver and it didn't make any difference. I check else where on the internet and saw similar complain and they blame the wireless router. Fortunately for me I had two wireless router in my house so I try the other on and it worked very well.
After that I tried the first router and it didn't work again so I eventually went to the second wireless router and the airplay worked fine. The icon showed and I was able to play all my itunes through the receiver.
Therefore I recommend changing your router. I'm now using a Cisco DPC2325 which was supplied with my internet connection. Previously I was using a D Link DIR655 and this one didn't work with AirPlay.
I hope this helps!
Cheers

Similar Messages

Airplay with Pioneer VSX-1021 (0dB Issue)

So sometimes when I start Airplay on my Pioneer VSX-1021 the receiver volume goes to 0dB (Which is extremely loud, I usually listen around -30 or-25dB) without me doing anything. It did it once when I adjusted the volume in iTunes while using Airplay but other then that it has only been when I first start Airplay.
I was wondering if anyone else has been getting any problems like this?
Thanks,
Matt

I have some other issues with the VSX 1021 ...
1) When playing over Airplay, the music stops on the VSX, when looking on the iTunes app on my iPad, the AirPlay connection was dropped. re-selecting the receiver as an AirPlay device solves the silence.
(not AirPlay related)
2) I do not seem to be able to set the volume louder than -20 dB using the iControlAV app
3) I cannot find the iControlAV iPad app (seen it in a Review Video on the internet)
Wouter

Airplay & Pioneer VSX-1021

When trying to use the Airplay function on the Pioneer VSX-1021 receiver, I am given an error message...."An error while connecting to airplay device VSX-1021. An unknown error occurred (-15000)" and the music will not play on the receiver.
I updated my itunes on my PC to version 10.4.1.10 and made sure the firmware on the receiver is up to date. And I am still having problems.
I purchased the receiver about 1 month ago.
Can you please offer any advice?
thanks,
Brett P.

I have some other issues with the VSX 1021 ...
1) When playing over Airplay, the music stops on the VSX, when looking on the iTunes app on my iPad, the AirPlay connection was dropped. re-selecting the receiver as an AirPlay device solves the silence.
(not AirPlay related)
2) I do not seem to be able to set the volume louder than -20 dB using the iControlAV app
3) I cannot find the iControlAV iPad app (seen it in a Review Video on the internet)
Wouter

Airplay problems continue under Mountain Lion, iOS 6, Pioneer VSX 1021 K

There's several threads about getting previously working VSX 1021 models to play Airplay music here, and elsewhere on the internet. For some, turning of IPv6 worked. For some updated iOS or iTunes worked. For some, turning off Multicast or the IGMP Proxy in the router worked. For me, nothing has worked.
When initially got the receiver and was using iOS 5.x on my iPhone, the receiver could be off, and selecting it as an Airplay source would boot it, pause for a few seconds while it did so, then play music. It also worked fine from my computer. Now months later, many iOS updates later, it rarely works. Sometimes I can get it to work if I turn on the receiver, set it to HMG mode, then turn on my iPhone or iTunes, then select it as a source, then click play. Often this does not work, or I need a TV on connected to the receiver, or turning the receiver off then on again will work. However there's obviously something wrong, and something that I'm not noticing.
If I turn the VSX on and put it in HMG mode, then play Airplay to it from any device, it will switch to the Now Playing screen and say connected to the network. The track title does not come up, the album artwork does not come up, the progress bar does not advance (although it does on the iPhone or in iTunes). If you deselect the VSX as the Airplay source, play a new song, then select the VSX as the source again, the TV screen updates, but with the _previous_ info, ie the first song title, and the album artwork for the last song I tried to play. It still never plays. It's almost comical how confused it is: my iphone is playing Smashing Pumpkins set to the VSX as Airplay source, the TV shows Aesop Rock is the song title playing, and the album art is a Tool cover.
I'm at a loss. I think with Lion, iOS 5 and iTunes 10.x this would work again. As it stands, I have a new phone that has to run iOS 6, and my computer is updated to Mountain Lion and iTunes 11. My receiver, which used to be so boss (walk in the door with headphones, unplug them and select the VSX and after a brief pause the music would keep playing, nice!), is now just such a disappointment. Any thoughts?
Thanks for reading,
DD

I fixed the issue for me!
jgweiner
Sep 10, 2012 6:55 AM (in response to HowlingF)
In case you all didn't find the resolution to the wired/wireless issue here it is. I too have Verizon FIOS and experienced the same exact symptoms as described above (except that I have a Pioneer VSX-1122 and not a Denon). Simply disabling IGMP Proxy immediately fixed all of my problems. Not sure why everything worked fine to begin with and then stopped but in any event, it's resolved.
If using a Verizon Actiontec router .... on the router, go to Advanced (accept the warning) and go to the IGMP Proxy menu and disable IGMP Proxy which should resolve the issue. The issue here generally only presents when the AVR is wired directly to the Actiontec router and the iDevice is connected wirelessly. Note however, that if streaming IPTV, disabling this proxy will also disable the IPTV connection, so in that case you'll need to leave IGMP enabled and place an ethernet switch between the Actiontec and the rest of the network.

Pioneer vsx-1021: sub active w airplay

I have the above reciever and am feeding iTunes music streaming into it thru my atv2.
I cannot figure out how to get the sub engaged w my streaming music.
I have all updates in place, the sub works through atv2 for movies, but can't get it for music streaming.
Obviously it's a 2 channel stereo signal coming in but most amps know how to get fresh down to the sub regardless.
Please help very frustrated.
Ps I've connected via hdmi and to slink with same results.

I have some other issues with the VSX 1021 ...
1) When playing over Airplay, the music stops on the VSX, when looking on the iTunes app on my iPad, the AirPlay connection was dropped. re-selecting the receiver as an AirPlay device solves the silence.
(not AirPlay related)
2) I do not seem to be able to set the volume louder than -20 dB using the iControlAV app
3) I cannot find the iControlAV iPad app (seen it in a Review Video on the internet)
Wouter

Airplay on Pioneer vsx-2021

Hello,
i have just purchased a pioneer vsx-2021 av reciever, this has airplay but for some reason i am unable to send anything to it from my ipad2 or iphone 4.
I have an apple tv plugged into the amp, which i can see fine.
The amp is on the network and i can listen to internet stations. From my pc, if i have itunes open i can see both the apple tv, and the pioneer amp and use airplay.
I can use the avControl2 app to control the amp.
Does anyone know how i can get my ipad/iphone to see the airplay on the amp?
Thanks

Hi, Fixed this by enabling multicast filtering on the settings of my linksys wrt610n router. I can now see both the Amp and my appletv from all devices.
Hope it helps someone :)

IPad 2, AirPlay, and Pioneer VSX-60 connectivity

I purchased the Pioneer VSX_60 receiver a few months ago. Part of the selling point was the AirPort connectivity. I was able to get my iPhone 4 to connect to the receiver as well as my iPad 2 for about a month. Had a slight problem with the receiver and reset the software back to factory settings. I have not been able to connect since that time. I have the current version of software on ALL products (Apple and Pioneer). My Apple devices all "see" the VSX-60 as it appears as an option when selecting AirPlay output. When I select the receiver, music stops, if i hit play, it will default back to the current device either iPad or iPhone. I've tried checking all my settings through my AirPort Extreme base as well as my AirPort Express. AirPlay works fine through my Apple TV. Any ideas or recommendations would be greatly appreciated. Thanks in advance!

Not sure why your Pioneer receiver is unable to perform as a DHCP client, but adding the appropriate IP address information should be relatively straight-forward.
You can easily get the information using your iMac and going to: System Preferences > Network > Ethernet or AirPort depending on how your iMac connects to the network.
Here's an example from mine. Note: I'm using OS X Lion so it will look a bit different from yours.
For the Pioneer, the DHCP address = Router address; DNS = DNS Server, etc. However, DON'T use your iMac IP address for the IP address used by the Pioneer. The IP address you should use would be in the same subnet, BUT OUTSIDE of the DHCP server range of your router. By default, the AEBS, uses 10.0.1.2 thru 10.0.1.200 for these addresses. I would suggest using 10.0.1.210 for the Pioneer.

Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connetivity issue. My Panasonic Stereo is recognised on Airplay.

Since upgrading to the latest IOS, Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connectivity issue. My Panasonic Stereo is recognised on Airplay.

Hi
I don't know if you're still having this issue but there is a way round it as I'm having the same troubles.
I've just spoken to Apple about it and found out:
– If you have a Mac made before Mid-2011, it doesn't have a piece of hardware needed to take advantage of the 'Airplay mirroring'
– So you can update to a later version 10.6.8+ but this won't help at all
The way round it:
– Download 'Airfoil' and install this
– You can then play music from any defined source (Spotify, Quicktime etc) through your Airplay connected speakers
So sadly, for those have a Mac from before Mid-2011 there's isn't an option that's as easy as Option-click on the sound icon to switch to Airplay speakers.
Hope that helps, I can now get on with the rest of my day now after sorting this out.
Adam

Airplay does not connect with pioneer vsx-1121 anymore

After latest iTunes update airplay function does not connect with my pioneer vsx 1121 receiver anymore. I can see the reciver in the list when I click the airplay button but it does not connect and music keeps playing trough the laptop speakers. I am running win 7 and everything worked fine before the latest iTunes update.
Any ideas what is preventing the proper connection?

I am having the same problem. From my Ipad the pioneer vsx-1021K is visible. It connects, sound begins then stops after 2-3 seconds. This began in the last month. Infuriating. I can stream from my android to the device using double twist. I can stream to other devices like apple tv and Android apps like "hifispeaker" (a Airplay receiver for android).
What changed? It seems like there is something in the most recent Ipad updates? Some interfering application?
the Ipad is using IOS 6.1.3

I have an Iphone 4S on ios7.0.3 and am attempting to use airplay with an airplay enabled AV receiver from Pioneer (VSX-53). I also recently upgraded my wireless router. I no longer get the airplay icon on my iphone? Any suggestions?

I have an iphone 4S on ios 7.0.3 and am attempting to use airplay with an airplay enabled AV receiver (Pioneer VSX-53). I also recently upgraded my wireless router and the roouter is working fine with the five elements on the network. Prior to the upgrade to 7.0.3 and the router upgrade the airplay feature working fine and i was able to consistently use airplay to stream music th the AV receiver. After the upgrades the airplay icon no longer appears on my iphone or on my macbook running itunes. Any suggestion on how to trouble shoot the missing airplay icon is much appreciated.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Airplay to Pioneer receiver no longer works after 10.4 update

I have a VSX-1021K receiver unit which until yesterday, I used quite frequently with iTunes' airplay function. Then, I installed iTunes 10.4 on my Windows 7 computer (32 bit) and suddenly, airplay does not work.
iTunes can still see the VSX-1021 unit and it shows up, but then when I try to play music to it, it fails with the following error:
"An error occurred while connecting to the airplay device "VSX-1021" An unknown error occurred (-15000)."
Meanwhile, the screen on the A/V unit shows "No Title" while it's in Airplay mode. Normally it would display the track information.
I've already emailed this exact question to Pioneer support, and will follow up here with anything I hear back from them. It's possible they might need to update the firmware of the receiver to support protocol changes created in 10.4
Note: I love that iTunes has finally added Aero effects support for Windows 7 (and Vista, I can only assume), only 1.5 years late to the party. But at least it's there. Sweet GUI effects.

Note: issue can be worked around by disabling the Windows Firewall. Interestingly enough, reenabling the Firewall after Airplay is already playing also does not cause problems; the music keeps playing without issue with iTunes 10.4 - but if I revert playback to 'internal speakers' and then back again to the receiver, the errors begin again.
So, that leads me to believe that the Windows Firewall (and OSX firewall, since I've seen similar threads on the mac side of things) is blocking the network protocol/port that allows authentication with the Airplay device, but once connection occurs, that protocol is not used again.
I've spoken with Apple phone support (thank goodness my work gave me a Mac laptop with a warrantied serial number I could use on them) about this, and have been told it's been forwarded to the iTunes programmers. Hopefully we'll see a patch soon, so I don't need to keep my firewall disabled!

Pioneer vsx-527

Hi,
I bought a pioneer vsx-527 amplifier with airplay to use with my iPad. This worked well up to some days ago. Now, iPad recognise the amplifier send music during 55sec and stop. The level button on iPad doesn't control the amplifier volume no more. I try it with iTunes and Spotify... I reset the iPad, reinstall it, installed the new firmware on the amplifier... Same result !
The iPad work well with airportexpress and the amplifier work well with my iPod (ios 4)
Somebody experienced the same problem ?
Thanks

Hi Nick,
How is the Homehub connected to the D-Link? Could you give a bit more detail to explain which devices are connected to each router and how? Can any devices on your network see the HDD?
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

HT4437 I have a Pioneer VSX-1012-K and i want to change the name of it on my iphone to something elce. Is there any way i can do this.

I have a Pioneer VSX-1012-K airplay amp and I want to change the name of it when i am using AirPlay. Is there any way i can do this?

If it is showing off line, either the battery is dead, the SIM has been removed or the iPhone has been restored. Report it to you carrier. Some offer blacklisting. You can also send a remote wipe to the phone via iCloud. There was also the option to send you an email if the phone is located when you were in Find My iPhone. Report it to law enforcement, change the passwords on all accounts that were on the device. Did you have a passcode on it?

HT4437 AirPlay enabled Pioneer receiver, do I still need Apple TV?

I just picked up a Pioneer VSX 1023 receiver that is AirPlay enabled.
The directions are terrible and I can't seem to figure out how to sync with my iPhone music library.
I have an iPhone 5 with ios7.
Do I have to use Apple TV with this device? I was under the impression I would not since the receiver came with AirPlay.
Any ideas how to make this work would be appreciated.

Hey
First you need to connect your pioneer amplifier to your house wifi connection. There is an Ethernet port at the back of the amplifier, connect that to the internet box. Then once you have hooked up your amplifier to the internet. Just go to control centre menu from the bottom of the iphone screen. Make sure you wifi is on and then Click on 'AirPlay'. You should get an option to play audio on your pioneer amplifier. Air play would only work when both devices are hooked up to the wifi connection.
Hope that helps
Cheers!

Apple TV & Pioneer VSX-1021k

Hi,
I use my pioneer VSX-1021k to watch TV at home. (It's a Stereo)
The problem is when I connect the Apple Tv to a HDMI connection I get a scrambled screen. Is there a way to get this to work?
Do these 2 products work together?
I know that the VSX-1021k stereo already has airplay however I think I should be able to connect and see the menu on the appleTV at least.
Thanks for any help,
Bmcc81

The problem lies inn the HDMI interface. Check your HDMI settings for the Pioneer and make sure the output to the HDTVis set to 1080i not 1080P. Also make sure your HDMI input for the ATv is labeled and activated within the VSX set-up menu.
The difference is in the scan line reproduction: I=interlaced; P= progressive scan. The ATv is equip'd to handle "up to" 1080P. I use the Atv thu a Integra Rcvr with an old 1080i Mitsubishi with no problem.
Most "average" movie watchers could not tell i from P unless viewing side-by-side and you will still get all the kick-*** sound benefits of HD thru you rcvr. Good Luck

IPad+AirPlay vs. Pioneer VSX-1021-k

Similar Messages

Maybe you are looking for