IPad - All new.. But the " +" sign is missing in calandar.. Im not using iCloud or something else.. What to do then??

iPad - All new.. But the " +" sign is missing in calandar.. Im not using iCloud or something else.. What to do then??

Go to Settings>iCloud>Calendar>On. Toggle the setting on and off. You don't have to use iCloud, so just turn the setting off if you don't want to use iCloud.
Turning the calendar on in the iCloud settings usually sets the + to appear again.

Similar Messages

My iPad is stuck. The little box stating that there is not enough iCloud storage available will not close or allow me to go to settings....I have tried to shut it down but I can't access the slide to power off button either. Any thoughts???

Hey there Apple Users
I would like some assistance with my iPad please
My iPad is stuck. The little box stating that there is not enough iCloud storage available will not close or allow me to go to settings....I have tried to shut it down but it won't let me access the slide to power off button either. Any thoughts???

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

[svn:fx-trunk] 16385: -removed the utilities package target since it' s not used any longer - at least what is contained in this target.

Revision: 16385
Revision: 16385
Author:   [email protected]
Date:     2010-06-01 13:32:35 -0700 (Tue, 01 Jun 2010)
Log Message:
-removed the utilities package target since it's not used any longer - at least what is contained in this target. I believe this was a leftover from flex 2 days.
-fix up the packaging targets to ensure they are being properly built. I removed depends="temp-clean" and inserted antcall target="temp-clean" because a target gets executed only once, even when more than one target depends on it.
QE notes:
Doc notes: no
Bugs: no
Reviewer: Guarav
Tests run: no
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
-This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes on new iTune

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes account on my new ipad. help

You want to restore from the backup. Do not set up as new. You can read the article that Tom posted above, but it really is pretty simple.
Transfer any purchases from the old iPad into iTunes, backup the old iPad in iTunes and them sync one more time.
Connect the new iPad and when prompted during activation, restore from the backup that you just created and then sync with iTunes.
The new iPad should be identical to the old iPad, but you will have to enter some passwords again on the new device.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

I have a problem with syncing my calander with outlook 2007 for iPhone 5s, ipad 1st and 3rd generation. Contacts work find, and new and changed enteries in outlook all go to the devices. Device Cal changes do not appear in Outlook

Over the past year or so, I have been unable to fully sync my iPads with outlook 2007 calander. Now I have an iPhone 5s, and really need the calander fixed. Contacts seem to sync in both directions, and any new or changed cal enteries in outlook appear on the device. The problem is that any new or changed calander enteries do not make ip back to outlook 2007, so there is only one-way syncing (down to the device) but no return, for calander entries.
I am now using the latest itunes, which I followed the recommendation delete all apple stuff, and then reinstall, I have used scanpst, built new PSts, etc, am I am stuck.
Not using icloud either.
Not using wi-fi, purely USB cabale sync
Running on Windows XP, SP3
Now IOS 7.0.2 on iPhone and 1 iPad (3rd gen)

Kept searching, found this: https://discussions.apple.com/message/23321067#23321067
Bottom line: if you follow the recommendation to delte all itunes software and re-install, it don't work (at least for me and many others).
However, purge the data (certain data) and the data syncs.
I think the folder is Apple Computer\Preferences and it needs to be purged.
To be sure, maybe someone can rename the folder on their system, then run itunes and see if it syncs ok.
The idea is to figure out the least minimum stuff that needs to be touched in order to get a working solution than having to purge all Apple software and then rebuild it all over again.
I had purged other files out of inpatience, but did not want to purge entire folders because I had Safari, and Quicktime software, and did not want to wipe that out, Plus there were software downloads and device backups in some of those folders. But I really believe it is the preferences folder, and I would like someone with the same problem to try it and verify it.
Once the preferences folder is removed/renamed (taken out of the picture) pluggin in the device and go to the INFO (I think that is the iTunes tab) page where you select calanders, contacts, email accounts, etc. They will all be unchecked (because you wiped out the preferences) and you need to reselect them. Then run your sync.
What I had done in testing was create something on the device, and modify something else on the device looking to see what got up to Outlook. I got the good news that something good was happening when I got the conflict message from iTunes, and it showed both Outlook and iPhone, showing the calander entry I changed on the iPhone. Never got that before. After the sync, everything looked good the few test entries were uploaded to outlook.
Now, My Cal is 10L+ enteries, and I am doing 100% sync (I don't select the option to ignore enteries over x days). I also have 1400+ contacts. Before this change, the sync of contacts & calanders took a couple of hours (and only operated ONE-WAY, now the syn is taking less than 5 minutes for this one step.
I am a Windows XP Professional user, x32 bit system, using Outlook 2007, iTunes 11.1.1.11, I am standalone (no exchange server) and have about 10 email accounts (mainly POP) defined. I am using only one calander in outlook, but I have Outlook and 2 gmail calanders in the iPhone.
I am running iPhone 5s and iPad 3rd Gen both with IOS 7.0.2 and a 1st generation iPad with the latest version of IOS 5.x.
If anyone else has success, I'd like to hear, along with your experience.

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but it is correct.

I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but it is correct. I have re-set both router and all laptops - no joy. They can all see the network but cannot connect.

This is extraordinary. I have moved the router and also tried resetting it to its factory strings. We have had this router for over a year and all our devices have always worked. Now all four laptops will not connect to the internet. Only one oMac and our phones and iPad.
I have had far more devices running at once before but now all laptops are timing out on connection. Some say this iIP address is already being used but if I manually set to a slightly different IP address it does not help, noir if I manually set to the correct IP address. Why would all our laptops (four) suddenly be unable to connect?

I am having problems importing my Iphoto pics into new Photo programme. I am inporting approx 11,000 pics that all seem fine in Iphoto but the iport rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I am having problems importing my I photo pics into new Photo programme. I am importing approx 11,000 pics that all seem fine in I photo but the import rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I have the same problem.
Thread here: Import fails - "Unable to get metadata"

New nano - music is loaded, nano is charged, volume settings are all on but the music does not play thru the earphones?

New nano (7th generation) - music is loaded, nano is charged, volume setting are all on but the music does not play thru the earbuds, Checked with a different pair with same results...I'm sure I must have something not turned on that should be but not sure - help!

Hi deb253,
If you are having sound issues with your new iPod Nano, you may find the following article helpful (it is aimed at the 6th Gen, but the steps should be similar for the 7th):
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Regards,
- Brenden

I want to restore my new ipad to my old ipads back up, but the back up is not listed in the drop down menu.

I want to restore my new ipad to my old ipads back up, but the back up is not listed in the drop down menu.

OK, report back once it is done even if it works so that others with similar problems can find solutions.

I had itunes years ago but the email address associated with this is not longer in use. Is there anyway to updating and transferring all music and data to a new email address?

I had itunes years ago but the email address associated with this is not longer in use. Is there anyway to updating and transferring all music and data to a new email address?

Hello Graceevelyn23,
Thanks for the question, and welcome to Apple Support Communities. You can update the primary email address that is used for your Apple ID:
Apple ID: Changing the email address you use for your Apple ID
http://support.apple.com/kb/HT5621
Thanks,
Matt M.

I have request in the report level but the same is missing in the infocube

Dear Experts,
I have request in the report level but the same is missing in the compressed infocube level. What could be the cause? does the compressed infocube deletes the request ? if so, I could able to view other requests under infocube manage level.
Kindly provide with enough information.
Thanks.............

Hi
Compressing InfoCubes
Use
When you load data into the InfoCube, entire requests can be inserted at the same time. Each of these requests has its own request ID, which is included in the fact table in the packet dimension. This makes it possible to pay particular attention to individual requests. One advantage of the request ID concept is that you can subsequently delete complete requests from the InfoCube.
However, the request ID concept can also cause the same data record (all characteristics agree, with the exception of the request ID) to appear more than once in the fact table. This unnecessarily increases the volume of data, and reduces performance in reporting, as the system has to perform aggregation using the request ID every time you execute a query.
Using compressing, you can eliminate these disadvantages, and bring data from different requests together into one single request (request ID 0).
This function is critical, as the compressed data can no longer be deleted from the InfoCube using its request ID. You must be absolutely certain that the data loaded into the InfoCube is correct.
Features
You can choose request IDs and release them to be compressed. You can schedule the function immediately or in the background, and can schedule it with a process chain.
Compressing one request takes approx. 2.5 ms per data record.
With non-cumulative InfoCubes, compression has an additional effect on query performance. Also, the marker for non-cumulatives in non-cumulative InfoCubes is updated. This means that, on the whole, less data is read for a non-cumulative query, and the reply time is therefore reduced. See also Modeling of Non-Cumulatives with Non-Cumulative Key Figures.
If you run the compression for a non-cumulative InfoCube, the summarization time (including the time to update the markers) will be about 5 ms per data record.
If you are using an Oracle database as your BW database, you can also carry out a report using the relevant InfoCube in reporting while the compression is running. With other manufacturers databases, you will see a warning if you try to execute a query on an InfoCube while the compression is running. In this case you can execute the query once the compression has finished executing.
If you want to avoid the InfoCube containing entries whose key figures are zero values (in reverse posting for example) you can run a zero-elimination at the same time as the compression. In this case, the entries where all key figures are equal to 0 are deleted from the fact table.
Zero-elimination is permitted only for InfoCubes, where key figures with the aggregation behavior SUM appear exclusively. In particular, you are not permitted to run zero-elimination with non-cumulative values.
For non-cumulative InfoCubes, you can ensure that the non-cumulative marker is not updated by setting the indicator No Marker Updating. You have to use this option if you are loading historic non-cumulative value changes into an InfoCube after an initialization has already taken place with the current non-cumulative. Otherwise the results produced in the query will not be correct. For performance reasons, you should compress subsequent delta requests.
Edited by: Allu on Dec 20, 2007 3:26 PM

Got a new lap top my husband wanted to help me by downloading itunes on it I have not used icloud but do have it on my phone When he pugged it in it asked if he wanted to backup he said yes Then reset my phone now all my pictures are gone please help

I got a new lap top and my husband thought it would be a good idea to help me by downloading itunes on it. Well Not so much... I have not used icloud but do have it on my phone and other items. When he pugged my phone in to my laptop it asked if he wanted to backup he said yes. Then it reset my phone and now all my pictures are gone please help

If your phone was backed up to your computer, the backup would contain your camera roll photos (and videos). Restoring to this backup would recover them. However, if it was backed up a second time after losing them, this would overwrite the backup containing the data and your photos would be lost.
You can try restoring to your backup, but before doing so go to iTunes>Preferences>Devices and check "Prevent...from syncing automatically". This will prevent the phone from automatically syncing and backing up when you connect it to your computer, thereby overwriting the backup you want to restore to. After doing this, open iTunes on your computer and connect your phone, then right-click on the name of your phone on the left side of iTunes and choose Restore from Backup. (If you have iTunes 11 first go to View>Show Sidebar.)
Again this might work, as long as the phone was only backed up and then not subsequently backed up again after the photos were lost.

I updated my iPhone and iPad to ios8, but the iPad didn't sync with iCloud drive, despite it is "on". What do I need to do?

I updated my iPhone and iPad to ios8 but the iPad did not sync to my icloud drive, despite it is turned "on". For example, my iPhone shows all my spreadsheets but they do not appear on iPad. What do I need to do?

Itunes 10.5 and Lion (10.7) on your computer and ios5 on the devices.

IPad - All new.. But the " +" sign is missing in calandar.. Im not using iCloud or something else.. What to do then??

Similar Messages

Maybe you are looking for