IPad and Apple TV won't connect after upgrade to 6.1.2

I have two iPad2 that I installed the latest upgrade on to test the waters last Thursday. They both connected to Apple TV on Friday, now today, Monday, niether will connect.

I found another discussion that helped with my situation. I turned off the devices; iPad and Apple TVs, then powered down the Wireless Access Point (WAP) and when the WAP came back up, I restarted the devices. In both cases the devices connected without a hitch.

Similar Messages

  • I updated my ipad and now it won't connect to a server

    I updated my ipad and now it won't connect to the server???

    had it ever been jail broken

  • Bluetooth between New iPad and iPhone 4S won't connect

    This worked earlier this week (for the purpose of using Keynote Remote on the phone to make a Keynote presentation on the iPad), but yesterday, the iPad and iPhone began to be unable to connect via Bluetooth. I've rebooted both devices a few times.  Sometimes they can see each other, but can't connect; other times, they can't see each other at all.
    This is for my boss so I am really in need of some help.

    It does seem that this isn't possible, but for some reason this reads as though you can use Keynote Remote on your iPhone to control a Keyntoe Presentation on your iPad.  I can't get it to work:  http://support.apple.com/kb/HT3325?viewlocale=en_US&locale=en_US

  • I changed my iCloud password with my MacMini now both my iPad and Apple TV won't let me login to iCloud.

    I changed my iCloud password using my MacMini (OS X 10.10.3), all went well.  But when I tried to use my Apple TV it repeatedly tells me that that my password is incorrect, I've tried both the old password and the new password and consistently get the same answer.  Next, I tried my iPad and got the same run around.
    What am I doing wrong?

    Welcome to the Apple Community.
    From the T&C's:
    The iTunes Service is available to you only in Canada, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.
    However that being said others have used iTunes in other countries, so this could just be a network issue.

  • IPad and iPhone "not enough available space" after upgrade to Aperture 3.1

    Hello
    I was syncing lots of images no problem through iTunes/Aperture to my iPhone and iPad. After upgrading Aperture to 3.1 both devices report "not enough space" during the sync and have substantially fewer albums and photos on them than before. What the **** has happened? Now the pictures seem to take up much more space.
    Anyone else finding this?
    Thanks
    Nico

    I get to this step in step 5 but I dont have the file/directory
    Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
    Where can I download the needed file? I think it is called usbaapl64

  • TS1741 Apple TV won't connect after software update

    Apple TV worked superbly until I updated the software today.
    Now it won't work, asks me to connect to a PC.
    I don't have a desktop, and don't have the appropriate USB lead to connect Apple TV to a PC...

    Take the device to a friends and restore it via their computer or take it to an Apple store.

  • ITunes and Apple TV Won't Sync After Moving to New Mac HD

    I've had to clone my 10.5.5 system onto a new HD. Now the Apple TV that previously synced doesn't see iTunes 8.0.1. On the Apple TV under Settings>Computer, the link to my iTunes library is greyed out. However from iTunes on the Mac, I can still select the Apple TV for AirTunes and stream to it so they are connecting on some level. I'm fairly certain that I could turn off the sync on the Apple TV side and set up a new one. However that will likely result in the entire 23GB library being erased on the Apple TV and copied again over the network. Is there a way to save many hours and reconnect the libraries without copying everything again?

    I haven't seen any reports of it being done with version 2 of the tv software, but under version 1, if you set up a new primary library from the tv which was essentially the same as the library you were replacing, it wouldn't re-write anything which it didn't need to.
    As I say, I have no idea if this is the same with version 2 software.

  • IPhoto and Apple ID won't work after system update

    I've recently updated my MacBook Air to OS X v10.9.4.  iPhoto won't work as i am currently using v9.2.  I've tried downloading a later version but have been advised that my Apple ID will not work on this computer.  NB.  I have an iPhone but have not used the Apple ID on this - to my knowledge, or another Apple ID on my system.  I'm a basic level user so any advice on this would be great.
    Many thanks,
    Elza

    have been advised that my Apple ID will not work on this computer
    Advised how, exactly?

  • TS1741 I cannot pair myriad to the Apple TV although the PC iPad and Apple TV are all connected to home sharing

    I cannot pair iPad

    Replys can only be has helpful as the details provided and "I cannot pair iPad" is not even a complete sentence.  It does not sound like this is an ATV question though so you may need to be posting in a differnt fourm.

  • XP computer won't connect after upgrade to 7.5.2

    We have multiple Apple devices which connect seamlessly with Airport Extreme. However, it seems like after the latest firmware update to 7.5.2, our older XP laptop (Toshiba) will not connect. It sees the SSID but will not connect. Our 2007 Dell XP desktop also had this issue, but when I changed the security on AEBS to WPA2 (from WPA/WPA2), the desktop ws able to connect.
    If I unsecure the network, the laptop can connect. It is much older (2003 or so). Funny thing is, it did connect fine using WPA/WPA2 until this past week.That's why I think it was the AEBS firmware update.
    I'm thinking about setting up a guest network for the laptop alone and leaving all other devices on main network. I would rather not have guest network unsecured. Is it possible to keep main network as "n" and use WPA2 and set guest network to "a/g" or wahtever would allow me to use Transitional WEP? I would want to keep the main network as "n". I do not want to downgrade it to "a", "b", or "g" for this one laptop that is used occasionally.
    If my only option is to leave guest network unsecured, will my main network (with banking info etc) still be secure?

    DaveF333, welcome to the discussion area!
    The available security choices for the Guest Network are:
    WPA2 Personal
    WPA/WPA2 Personal
    None
    Security on the Guest network is independent from the Main network, so you could have security set to None on the Guest network and it would not affect the security on the Main network
    If you are in a mood to do some exploring, check out the following:
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab/label just below the Advanced icon
    Hold down the option key on your Mac while you click on the Radio Mode selection box and you will see an expanded list of choices.
    Choose 802.11n only (5 GHz) -- 802.11n/g/b
    Now hold down the option key again and click on the Security setting and you will see a choice to establish WEP Transitional Network. This setting allows WPA devices to connect using the higher security WPA and WEP devices to connect using WEP. You might want to give that a try.
    You can also experiment with a number of different Radio Mode and Security combination settings to find other WEP Transitional Network choices. Just remember to hold down the option key when you click on the selection boxes.
    Pretty neat, huh?

  • HT204409 WI FI won't connect after upgrade to IOS 7.1

    I upgraded to 7.1.  Now my phone connects to my Western Digital MyNet900 but will not go to internet.  Have tried WPA and WPA\WPA2 and WPA2 (personal) encryption but nothing works.  WMM is enabled.  I have an Amped Wireless access point AP300 set up and can connect on it for the internet.  I was going to internet through WD router prior to upgrade. HELP PLEASE

    Update: Again...  I upgraded to iOS 7.1 on my iPhone5s 32 G last night and after the upgrade...no WiFi.  I attempted many of the fixes on this and other threads but what finally seems to have solved the problem was for me to:
    1.     Back up and sync my phone to my Win 7 computer.
    2.     Select "Restore iPhone" to factory defaults, using the computer iTunes interface (as opposed to selecting "Full Reset" in Settings on phone).
    3.     Restore the back-up from the computer.
    I Now have normal WiFi functionality.
    BTW...it also eliminated 8 or so Gigs of "Other" data previously noted on my Summary page for the phone in iTunes.

  • I reset my ipad 2 and now it won't connect to the internet

    I reset my ipad and now it won't connect to the internet

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Both iPod and iPad won't connect after update.

    Both iPod and iPad won't connect after update.  iTunes says "can't allocate a resource"

    I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
    Follow these steps to reset the Lockdown folder:
    Disconnect all iOS devices from your computer and quit iTunes.
    From the Finder, choose Go > Go to folder.
    Type the following and then press Return:
    /var/db/lockdown.
    The Finder window should display one or more files with long alphanumeric file names.
    In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
    Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
    Reconnect your iOS device and open iTunes
    My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

  • Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.

    My older model Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.  I have two Apple TVs in my house and I can't imagine that this is part of the problem but I mention it just in case.  My other Apple TV is brand new and it connects to iTunes just fine.  I've tried most of the "fixes" and one says to Force Sync but I can't since Apple TV isn't in my device list.  Another "Fix" said to Navigate the Apple TV to Settings --> Downloads --> Check for Downloads, but when I tried that there was no option for "Downloads" under the Settings Heading.  I'm at a loss.  Please help.  Could this be an issue with too many authorized devices?  We have three iPads, two iPhones, laptop, desktop, two Apple TVs, and an iPod and most of them are syncing the same music playlists and whatnot...  have I run out of rope?

    hi, just posting to everyone in general..its not you, or your apple tv, it is itunes.
    ok, ive had the exact same issues for weeks now, as with everyone i had done the lastest upgrade and no longer could see/sync my gen 1 appleTV.........so, i removed the upgrade and went back to the prev version, even though it was showing in my prefs under appleTV, it still wouldnt show in the side panel under devices....i gave up.
    This week i was determined to get it to work!  So i started from scratch, totally removed itunes and started back with version 9 and upgrade each version from there, i had no luck, ic clicked find appleTvs but it wouldnt....however i just d/l version 9.2.0.61 and BINGO!. No sooner has it opened and up popped the side panel devices list, showing my appleTV..all ready to be synced etc. I immediately panicked of course haha..and set it all up and its working perfectly.
    ...Only catch now is that this older version will not be compatiable with my iphone, which i do keep music on...seems we cant win. grrrrrrrrrrrrrrrr   this will be the same for all the latest apple products.
    Apple needs to allow more than one version of itunes per pc OR perhaps they could get their act together and include all of the millions of APPLETV GEN1  owners in there latest upgrading..after all, THEY made the product and THEY do sell the movies/tv shows, perhaps they could stop making all the upgrade all about the music only!......on which i might add why not incluse movies/tv shows in icloud! yet another upgrade that should be included in the APPLETV  GERNERATION 1!..yes we do  still exist!
    at the very least, im happy ive managed to get all my movies etc onto the apple tv, where ill keep them and from now on d/l directly onto my apple tv. I usually d/l to my laptop and then send them to the appletv but while trying to get all this sorted i did a test, i d/l a movie  using my appletv hoping it would somehow let itunes "find" it and getting it to show up in my device list, but it didnt work,  however it did sync/send the movie to itunes..  so at least i could save a back up copy.
    good luck trying, as i said this has been weeks and this is the only solution ive found so far....and going through these forums its obviouse its itunes thats the issue, NOT Our apple tvs.

  • So my i just dropped my iPad and now it won't start up. It just keeps turning on and off. Like the apple symbol shows up and then goes away? What happened and is there a way to fix it. I tried restoring and that didn't work

    I pretty much stated it in my question. I dropped my iPad and now it won't boot itself up. The apple symbol shows up, then the screen turns all black and weird looking with a strange green color at the bottom, and just turns off. It keeps doing this over and over. What happened and is there a way to fix it? I also tried connecting it to itunes and that doesn't seem to be working. It detects an ipad but can't seem to read anything else. It tells me to try and restore it but I can't. HELP!!!

    Try this. It worked for a few users after a drop.
    Turn the iPad over and give it a very HARD slap on the back. May take several slaps.
     Cheers, Tom

Maybe you are looking for