IPad and images in PDF's

What's with the iPad and images in PDF's? I've tried a fair number (>6 & <12) and many of the photos, images, maps and graphs don't display except as white (blank) space. I've tried two PDF readers and Safari. I tried to find the specs., but those say the image formats should display. I'm open to suggestions.

Sure, it's at:
http://www.wsrphoto.com/web-files/CarbonRiverESA.pdf
or at the bottom of the Web page at
http://parkplanning.nps.gov/document.cfm?parkID=323&projectID=19729&documentID=3 6317
When you extract the images, maps and graphs in Acrobat, many export as 8-10 horizontal or vertical (long axis) images. Acrobat on the Mac has no problems rendering it right, but on the iPad it's blank areas. I've tested other PDF with the same problem.
On the working side with the iPad I've loaded entire geology guide at
http://www.wsrphoto.com/mtdnrbook.html
see link to the "Whole Book" in list of chapters. Every image, map and graph display fine (and make a cool carry along book for road trips).

Similar Messages

  • Add text and image into pdf

    Hi,
    I have several PDF in which I must add a different text by pdf and image in all pages in each PDF document
    How do with the SDK and delphi
    Regard's
    Laurent

    I think you may misunderstand the capabilities of PDF. Are you expecting the PDF to reflow around your new content - because it will not.
    Leonard

  • IPad 2/ IPad 3 image resolution

    Hello,
    I am wondering when preparing images for a book what will I have to take in account regards the different resolution of the IPad 1,2 display compared to the IPad 3 display? Would I have to optimize images for IPad3? Will they then be automatically rescaled for IPad 1 and 2 or would I have to make different publications entirely?
    Thanks,
    Sabine

    K T wrote:
    Would you like to exchange emails so we don't keep junking up other people's theads?
    Other people's threads? I wasn't aware that anyone owned a thread around here.
    It's just there for completeness and reference.
    - standard screen 72
    - iPhone retina 132
    - iPad retina 264
    I don't know what a standard screen is, or how it would be relevant to the iPad or the OP's question. I also don't know how the iPhone would be relevant for books created with IBA.
    At any rate, the pixel density of an iPhone with a retina display is 326 dpi; the pixel density of an iPhone without retina display is 163 dpi.
    It's just there for completeness and reference. Who knows what readers may have in mind that stumble across this thread.
    Would be good it were accurate then.
    Would you like to exchange emails
    You already have my email address. I do not have yours.
    Now, to answer the OP's question:
    There is no need to create two versions of a book. High-resolution images will be scaled down automatically for display on an older iPad, and images with resolution of up to 1024 x 768 will be automatically pixel doubled on a new iPad, so the visual appearance is the same on either device, except for the amount of detail.
    There is a thread here that discussed this at length.
    Michi.

  • Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

    Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Incorrect display of images in PDF on iPad

    I have a problem with displaying images in a PDF on the iPad. The PDF is created from a MS-Word file on a PC.
    On a PC, the images in the PDF display OK.
    On an iMac, the images in the PDF display OK.
    Only on the iPad, the images in the PDF display weird, see these pictures:
    First the correct image as it is diplayed on PC and iMac:
    And this is how it looks on my iPad:
    The text in the PDF is OK, it just that (some) images display faulty.

    it is possible that you transferred data to your ipod through my computer or something, that wuold not show up in the library or be accessable on your ipod but it would still take up space, for example i saved my whole cmoputer and all the files on my ipod drive for system recovery and it showed my ipod at full capacity with only 600 songs

  • I have several pdf files in my computer which are organized in folders. I want to transfer them to IBooks (in my Ipad) and keep the folder structure I use in my computer. Is it possible to do it? Do I need any other app?

    I have several pdf files in my computer which are organized in folders. I want to transfer them to IBooks (in my Ipad) and keep the folder structure I use in my computer. Is it possible to do it? Do I need any other app?

    By design, the organizer (and any other database management systems) is there to prevent you from duplicating your media files. The catalog management allows you to have the same image in different categories or albums. Duplication in different folders is to be absolutely avoided.
    The same image file can have multiple tags like 'family', 'vacations', 'birthdays' and be present in three different albums with the same names. On obvious advantage is less disk space. Another one with your present folder system is that if you edit one of your duplicates, the other ones are unchanged.
    I don't see an easy way to make your present folder structure simplified for the organizer ...

  • I'm trying to get organized and I just added a bunch of books and pdfs to my itunes library. They were all added immediately to my ipad and iphone even though, itunes automatically putting books on my idevices

    I'm trying to get organized and I just added a bunch of books and pdfs to my itunes library. They were all added immediately to my ipad and iphone even though I did not want this. I added them to itunes using add to library and I have both devices set to sync only selected books.
    How do I do this in the future so this doesnt happen? Its a lot of work to now manually erase them from each device and it sent my phone over capacity.
    thanks

    I dont see the difference in the posts. I dont think theres anything inaccurate or misleading about what I wrote. The items were immediately added to my ipad and my iphone, even though I have them both set to sync only select items. As soon as I added new titles to my itunes library, they were immediately added to the devices. Not on the next sync. Immediately. Both devices were plugged into the computer at the time. Sorry if I failed to mention they were plugged in but I dont see the signifigance youre making out of it. The problem persists anyway.
    Now that I did a test without the devices plugged in, the new items were still added as soon as I plugged my devices into the computer ( I do not have them set to sync over wifi).
    Since I have both devices set to manually select items to sync, of course I want to manually select new items to sync. For instance, I am not going to read any of these magazines or books on my phone, ever, and I dont want to waste valuable space with them.
    So I'm trying your advice:
    I just tried deselecting sync books. It erased all content from ibooks on my device. I then dragged
    one title onto the device, and it just goes back to syncing select books, with the one title selected.
    It appears that wont work to solve my issue. The next time I add something to itunes it will be put on my phone. Is this really something most people want? To select to manualy control what content is synced, but then have things automatically added. It seems inconsistent to me.

  • How do I leave editable text and images in a PDF?

    I recently bought a flyer template and it came as an editable PDF.  Here is one of the templates http://www.wendygarratt.com/images/flyer.pdf
    Every field, both text and graphic object, is fully editable in the free Adobe reader.  I have Acrobat X and have tried all the methods of producing something like this but nothing has worked.  I wish to produce not just one page template PDFs that can be edited like the one above, but I also have a 20+ page magazine, which currently is distributed in PDF form and I wanted certain image and text fields within the magazine to be customisable too. 
    I design the magazine using InDesign and the exported pages are composed of 1 large background image with text fields laid over the top.  I have tried exporting it as an interactive PDF, ticking the layers option for Acrobat, but when I try to create an editable form (Tools>Forms>Create>Open file) it does not recognise any of the text fields at all.
    Can someone please help me before I slam my head repeatedly in a door?  I have been searching for a solution for so long and I'm getting rather frustrated.
    Thank you in advance
    Wendy-G

    Thanks for the replies I've had so far, but I really need some detailed help to sort this.
    I want to be able to create a PDF that has editable text and editable graphics over a background image, that can be edited in the free Adobe Reader, as per this item - http://www.wendygarratt.com/images/flyer.pdf
    I know this was designed in LiveCycle and I have LiveCycle and Adobe Acrobat Pro X, but LiveCycle is new to me.  I am a quick learner (I use Photoshop, InDesign, etc) and need help in getting started.
    I am willing to work with someone to help get this sorted but it is urgent that I get to grips with this.
    Thanks so much for helping
    Wendy-G

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Since downloading the iOS on my iPad, I cannot download more than one pdf from mail to iBooks.  I have to shut down y iPad and start again.  Any suggestions?

    Since downloading iOS on my new iPad, I cannot downlaod more than one pdf from mail into iBooks.  I have to shut down my iPad and restart it to save a second pdf. Wasn't a problem with the old operating system.  Any suggestions?

    It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
    Hopefully anyone else else who has this issue in the future will be able to find this.

  • I have several manuals in PDF format. How do I download them into my iPad and view them?

    I have several manuals in PDF format. How do I download them into my iPad and view them? I downloaded a PDF viewer on my iPad and via itunes I can download the PDF to the iPad although for some reason the iPad comes up as 'RmoteTV' with a sub-directory of 'Books'. The 'PDFReader' app doesn't seem to find the file.

    You can use the free iBooks to read PDF files. Download the app, use itunes to transfer the data then open the PDFs.
    There are other pdf readers as well. I see good reader recommended and I'm sure there are more.

  • PDF Reader on iPad and iPhone

    Why isn't there an iPad and iPhone app to read PDFs that I have stored on iCloud Drive?

    Has the PDF document sent to your iPad 4 and iPhone 5s via email and opened in Apple Mail?  Apple Mail on iOS has known bugs with attachments (not just PDF documents).
    Please take a look at Problem #1: Some PDF attachments opened in Apple Mail on iOS are corrupted or damaged in the following document.
    How to avoid known PDF email attachment problems
    Alternatively, you can take the original PDF document (without damage) on your Windows/Mac computer and uploaded via a cloud storage service (e.g. Acrobat.com, Dropbox, Google Drive) and download it to your iOS device.

  • Mixed results on iPad and iPhone 6 Plus with background image. How to fix this?

    Flash Professional CC
    I'm having an issue with adding images on iPhone 6 plus and iPad. I'm getting mixed results with two items: 1) a background image and 2) a button that should appear at the bottom left-hand corner on any device. In one case the background image appears enlarged and only shows about 30% of itself. In the other case, the bottom left-hand button appears about 50 pixels to the left when x=0. I also get different results when I set the following:
    stage.scaleMode = StageScaleMode.NO_SCALE;
    stage.align = StageAlign.TOP_LEFT;
    This does not produce the expected results. I would like to have consistent results across iPad and iPhone 6 plus, which seams to be an issue. The immediate fix for this is to leave the images on the stage instead of using addChild. I could then just stretch the background image so that it spans the whole screen. But I want to add the items dynamically for greater flexibility.
    Here are two cases:
    Case #1:
    This an iPhone 6 plus and you should notice 2 things. 1) There is black and white on both sides. The blue background SHOULD APPEAR ACROSS THE WHOLE SCREEN. 2) The red button in the corner SHOULD APPEAR IN THE LEFT MOST CORNER OF THE
    SCREEN.
    Case #2:
    This an iPhone 6 plus and I have set the scale X, Y to the stage.stageWidth/Height:
    mc_stageBackground_Main.scaleX = stage.stageWidth;
    mc_stageBackground_Main.scaleY = stage.stageHeight;
    This results in a close up of the background image.
    Here is the code that I'm using:
    import com.greensock.TweenLite;
    import com.greensock.easing.*;
    import flash.display.StageAlign;
    import flash.display.StageScaleMode;
    //When this is active the background image spans across the device (iPhone 6 plus) correctly. The main logo image does not line up correctly.
    /*stage.scaleMode = StageScaleMode.NO_SCALE;
    stage.align = StageAlign.TOP_LEFT;*/
    var main_logo:MC_LOGO_MAIN = new MC_LOGO_MAIN();
    var mainBackground_2208: MC_MAIN_BACKGROUND_2208 = new MC_MAIN_BACKGROUND_2208();
    var mainBackground_1024: MC_BACKGROUND_1024 = new MC_BACKGROUND_1024();
    var mainCorner: MC_MAINCORNER = new MC_MAINCORNER();
    var chapters: MC_CHAPTERS = new MC_CHAPTERS();
    var _stageWidth = 1024;
    if (stage.stageWidth > _stageWidth)
        //Add bigger background if the stage is bigger than 1024
        mainBackground_2208.x = stage.stageWidth/2;
        mainBackground_2208.y = stage.stageHeight/2;
        addChild(mainBackground_2208);
        //Using this code results in a very close up view of the stage on iPhone 6 plus  
        /*mc_stageBackground_Main.scaleX = stage.stageWidth;
        mc_stageBackground_Main.scaleY = stage.stageHeight;*/
        //Adds corner to the main screen.
        mainCorner.y = stage.stageHeight;
        mainCorner.x = (stage.stageWidth - stage.stageWidth);
        addChild(mainCorner);
        TweenLite.from(mainCorner, 1,{ height: 0, width: 0, delay:1, ease:Elastic.easeOut});
        //add logo to sit at 50 pixels from the top of the stage
        /*main_logo.x = stage.stageWidth/2;
        main_logo.y = (stage.stageHeight -stage.stageHeight + main_logo.height *.6);
        addChild(main_logo);
        TweenLite.from(main_logo, 1,{ y: -main_logo.height, ease:Elastic.easeOut});*/
    else
        trace ("The stage is 1024 or smaller");
        //Add 1024 background if stage is 1024 or smaller
        mainBackground_1024.x = stage.stageWidth/2;
        mainBackground_1024.y = stage.stageHeight/2;
        addChild(mainBackground_1024);
        //Adds corner to the main screen.
        mainCorner.y = stage.stageHeight;
        mainCorner.x = (stage.stageWidth - stage.stageWidth);
        addChild (mainCorner);
        TweenLite.from(mainCorner, 1,{ height: 0, width: 0, delay:1, ease:Elastic.easeOut});
        //adds chapters
        chapters.x = (stage.stageWidth - stage.stageWidth)+75;
        chapters.y = stage.stageHeight - 120;
        addChild(chapters);
        TweenLite.from(chapters, 1,{ height: 0, delay:.5, ease:Elastic.easeOut});  
        //adds the Main logo to sit at 50 pixels from the top of the stage
        main_logo.x = stage.stageWidth/2;
        main_logo.y = (stage.stageHeight -stage.stageHeight + main_logo.height *.6);
        addChild(main_logo);
        TweenLite.from(main_logo, 1,{ y: -main_logo.height, ease:Elastic.easeOut});

    On all of the devices go to settings - facetime - iphone cellular calls - oFF, this part of Apple continuity.

  • How do I open email pdf's on iPad and iPhone?

    HII have an iPad on Ios7 and an iPhone 4.  I can't open PDF attachments on either device.  When I click I them in the email, it starts to load in Safari with the blue line running across.  The line then disappears and then a blank page appears.
    I've tried downloading Adobe from the App Store In order to 'share' by clicking on the icon that is a square with an arrow poking out of the top, however Adobe doesn't appear here when I click on it - just message, mail, twitter and facebook.  There's no option to 'open in' on the bar underneath this (the one with bookmarks, reading list etc).
    can anyone help please?
    My mail account is an @me.com on iCloud.
    Thanks.
    Fran.x

    lillylocket,
    What is your mail app on your iPad and iPhone?  Typically PDF attachments are opened in the preview screen of Apple Mail.  But it sounds like your PDF attachments are opened in Safari.
    Please you take a look at the Safari section of the following FAQ documents to open PDF documents in Adobe Reader for iOS.
    For iPad, How to open PDF documents in Adobe Reader for iOS (iPad on iOS 7 or 8 version)
    For iPhone, How to open PDF documents in Adobe Reader for iOS (iPhone on iOS 7 or 8 version)
    As you have discovered, Safari does not include the "Open In" options for the Share button.
    When you tap anywhere in a PDF document in Safari, the secondary toolbar is displayed below the top toolbar.  You need to look for the text label button "Open In..." instead of the Share button.
    Hope this helps.
    Please let us know if you have additional questions.

  • I have photos on my iPad (the first apple device in our household) and then added an iMac and a macbook air. How do I get all of my photos on all devices. Myoriginal iPad has images not on my 2 newer devices and my 2 new devices do not share the same phot

    I have photos on my iPad (the first apple device in our household) and then added an iMac and a Macbook air to our network. We have an airport 2TB back up device.  How do I get all of my photos on all devices. My original iPad has images that my 2 newer devices do not have on iphoto.

    My original iPad has images that my 2 newer devices do not have on iphoto.
    How are the images stored on your original iPad? Are they in the camera roll, in events downloaded using the camera connection kit, or are they in albums synced to your ipad from a computer?
    If the photos are in the camera roll or in events downloaded from a camera, you can transfer them to your iMac and MBA by directly connecting the iPad using USB. Then you can download the photos to iPhoto like from a camera.
    Only, if your photos have been synced to the iPad from a computer, you will have to save them first to the camera roll; then you can download them by connecting the iPad via USB.
    What IOS version has your iPad?
    For new photos you might consider using Photo Stream to transfer your photos between the devices.
    See: iCloud: Photo Stream FAQ
    iCloud: Using and troubleshooting Shared Photo Streams
    -- Léonie

Maybe you are looking for

  • Resource Management tab: Net Availability

    HI, xRPM: Under resource management: we can see the resources and their net availablity. Can anybody guide me: where these net availablity get stored..? (any table:where i can find the net availbility) our client want these data as a report on excel

  • MB_MIGO_BADI. Post document. Posting date?

    Hi Guys, I need your help. I'm using MB_MIGO_BADI, method post_document to change posting date in header. After user changed the posting date I need to check some conditions and if they are fulfilled I want to change this posting date with sending th

  • Error on importing a bean

    I have a jsp which imports a bean. The syntext is <%@ page import="xxxBean" %>. I got an error states" '.'expected import xxxBean; . Does java 1.4 require syntext change for this? Thanks, jw

  • Distorted sound in CQ-45 137tx

    Hi there, hear some distorted noise while playing music or videos in my laptop. This sound prevails in both Vista Home Basic x86 ( Previous os) and Windows 7 Ultimate x64 (Current OS). The sound comes in both the speakers and the headphones. I have u

  • My ipod isnt charging. i have a wall charger. i tried the usb on my laptop and my ipod still wont charge.what should i do?

    my charger isnt workingfor some reason. i tried the wall charger,the usb on my computer,nothing worked pleasehelp me thanks