IPad and iPhone wont connect to iTunes
Can anyone explain why my iPhone and iPad suddenly won't sync to my MacPro. They have both been syncing no problem until today. Using iTunes 10.6.1 and neither device appears in iTunes. However if you go into devices in preferences both products are listed. Tried to sync via WiFi and that failed also. However they do appear on the other Macs but I need them to sync to the MacPro. Went through the troubleshooting list on the Apple Support page, have tried different USB slots, cables etc but still can't connect. Hope someone can help. Thanks
Forgot to mention. Have tried obvious things like rbooting Mac and iPhone and iPad with no success
Similar Messages
-
My iPad and iPhone wont connect to my iTunes Library.
My iPad Air and iPhone 5s wont connect to my iTunes Library on my Macbook Pro.
Both will see the library and try to connect but as it reaches 1/4 of the way it stops.
If I turn off my iTunes Match on both devices, the full library loads on the iPhone only. I can go into the library and it will play. Does iTunes Match have to be turned off?
On the iPad, it shows the that shared library is connected to but it wont allow me to move off that screen. It freezes. I push the home button and it closes. I can reopen but it is no longer connected to the library. I cannot get further than this.
My Apple TV works perfectly connected to the same library.
I dont have more than 5000 songs in my library or more than 10 movies and 300 + episodes of TV series.
Any ideas to what could be causing the issue with the iPad?Forgot to mention. Have tried obvious things like rbooting Mac and iPhone and iPad with no success
-
My iPad/iPhone wont connect to iTunes please help
My iPad/iPhone wont connect to iTunes please help...im trying to sync both but its not connecting to iTunes and id like to update my music library
Hello there, gretchenkemp95.
The following Knowledge Base articles offer up some great, in-depth steps for troubleshooting your iOS device not being recognized:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
-
My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?
You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Good luck! -
i download the recent ios for iphone 4. i connected iphone 4 to my pc and it wont connect to itunes. What is the lastest version of itunes that DOES NOT support the lastest version of ios?
Yes, due to Incomplete Software Update on your iPhone your Device is now in Recovery Mode and you cannot take a Backup now. But if you have taken a backup earlier then you can Restore that backup on your iPhone after you Reset your iPhone to Factory Settings.
-
I just bought my iPod Touch 4g earlier today and it wont connect to iTunes, the iPod icon is there and when I try to restore I always end up with an error code. (1611)
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
-
downloaded ios 5, but my iphone wont connect to itunes ( haven't installed ios5)
Hello Apple_Addict22,
Thank you for your question. iOS 7 requires iTunes 11.1. First, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M. -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Iphone wont connect to iTunes or computer wont connect to iPhone?
Either my Iphone wont connect to itunes or my computer wont connect to iphone! My computer makes an unusual noise as I plug in a apple device, This wont let itunes pick up my devices. I have gone though all the proceedures online in which have failed. But when uninstalling Itunes, Apple mobile device was deleted in which then windows recognised my iphone and it started to charge which it did not do when I previously plugged it in. Just wondering if anyone has had similar problems and knows how to help?? Thanks
I'd look at these options
first,
http://support.apple.com/kb/HT1808
It that fails,
DFU mode[1] is a state that you can put your iPhone into where it can interface with iTunes but does not load the iPhone operating system or boot loader (this is what really differs DFU mode from recovery mode). DFU stands for Device Firmware Update.
While connected to PC, running iTunes, hold down Home and Power( button on upper right edge) button for exactly 8 seconds.
Release the power button. Restore message will appear in iTunes. The device will be recognized by iTunes, but no display will appear on the device itself. The lack of a display on the device will verify that it is in dfu mode.
[1] http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/ -
I have the right update of itunes but my iphone wont connect to itunes? What do i do?
I have the right update of itunes but my iphone wont connect to itunes? What do i do?
Hi jskills,
If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may want to take a look at the troubleshooting steps in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Brenden -
How iPad and iPhone Bluetooth connect?
How iPad and iPhone Bluetooth connect?It does't work.I try 36 times.help me.
If you trying to transfer documents via bluetooth between the iPad and iPhone then you can't as it's not supported - bluetooth on the iPad is aimed at devices such as headphones and keyboards. A full list of the supported bluetooth profiles is on this page http://support.apple.com/kb/HT3647
-
What's going on with safari on ipad and iphone not connecting?
What's going on with safari on ipad and iphone not connecting?
I am using safari on my iPad to respond here. What problems are you having? Do you have a good wifi connection? Try a reset, hold the power button and home button until you see the apple then let go.
-
Now the iphone wont connect to itunes
I uninstaled my web cam on the laptop because my computer would shut down when i conected the iphone..well that fixed that problem but now my iphone wont connect to itunes...can anyone help
ta
CraigFollow the directions here:
http://support.apple.com/kb/TS1495 -
home button is broken so i cant reboot and it wont connect to itunes all i did was lock it and it went black
Try this previous discussion:
Turn on without Home/Power Button
Maybe you are looking for
-
i am writing a program in jQuery to type Assamese language. I have made a function which is executed on each keyup. The function take the keycode and then display the Assamese alphabet based on Unicode decimal number assigned against the keycode in a
-
How to read any text files using file adapter as it is
Hi, I need to build bpel process to read any text files as it is.I am file adapter and using opaque schema.But input file is coming as base64encoding format.But i need the input as it is.How can i do that. Is there any sample schema to read input tex
-
Someone can help me?
-
Oracle Policy Automation sessions at Oracle OpenWorld 2010
S317710 on Tuesday 21st September at 12:30PM in the Westin Market St Hotel, Olympic Room Presenter: Davin Fifield Topic: Interactive guidance for dummies. A new rule-driven alternative to SmartScript. In this session: * Delivering Web-based self-serv
-
WLSE 2.11, snmp and wds errors
Hello, I try to use WLSE to manage our AP1131,1231 with different IOS version.. Some AP are in WDS domain with a WLSM, others in WDS with an AP configured to be wds master, and other are standalone without wds configured. I have a lot of AP with erro