IPad and Jabra HALO headset

Anyone ben able to get it to work with an iPad??? I have only been able to get the audio to work, but can not adjust the volume using the headset controls, and non of the other headset control functions work.
THX!

Technically, the problem isn't that the Jabra JX10 supports headset and hands-free - the problem is that it doesn't support A2DP, which the iPad requires. Bluetooth headsets can support all three of those profiles, and that's fine - as long as the headset supports A2DP along with whatever else it has, it'll work on the iPad.
Just another note: most mono (monaural) headsets don't support A2DP, though there are a very few. Many, but not all, stereo bluetooth headsets do support A2DP, as it's primarily used for music. Look on the box for A2DP, Advanced Audio Distribution Profile, or Bluetooth Stereo profile - I've seen it called any one of those three.

Similar Messages

IPad3 64gb WiFi & the Jabra Halo Headset

Is the iPad3 64gb WiFi Cellular compatible with the Jabra Halo Headset. Please note not the Jabra Halo2.I have a Jabra Halo being delivwered. I'm running iOS 5.1.1 I've read a few articles that said that they werre compatible , but have since read a few that says they aren't after I'd spent the money.

Hi , and Thanks for that . Unfortunately , it made no difference . According to iTunes I have successfully restored the iPad 3 but the problems are :
1) No response from the screen . Slide to Open etc do not work .
2) Audio Controls at the top of the screen appear randomly and flash and alternate with the clock . The Volume slider moves up and down all on its own while each of the other buttons are highlighted one after the other !
3) The few photos on board roll along on a permanent Slideshow .
4) A black bar , the same size as the Slide to Open bar , containing and exclamation mark and the words ' No Sim Card Installed ' has appeared in the middle of the screen . Inserting a Sim card has no effect .
5) Brightness flickers as if its own Slider Control is being moved up and down .
6) Basically , its now a brick . I cant gain access without the screen and cant properly shut it down without the ' Off' slider working !
7) Very disappointing with something < one month old
M~

Ipod touch bluetooth and jabra jx10 headset

I have been trying all evening to pair my ipod touch by bluetooth with my jabra jx10 headset. Searches forever but sees nothing.
Wondering if anyone knows whether these items are not compatible? My blackberry phone sees the jabra immediately.
Any suggestions will be very welcome.
Thanks,
Mike

Meg St._Clair wrote:
The Touch does not have the requisite BT profile for a headset (the kind with a mic that you would use with a cell phone). It will support stereo headphones, stereo speakers and, I believe, some keyboards. Sorry.
Hi there,
is this still fact with iOS 4.1? I'm just on the way to order a BT-Headset with mic for my son's 2G touch and Mac mini (gaming and Skype).
Regards
Jochen

Nokia e65 and Jabra bluetooth headset

As a new user I am experiencing a problem, I have a Jabra BT 250 Bluetooth headset, old but trusted, it works fine but each time I want to connect to phone it will not automatically recognise so I have to connect manually - a real pain!

Hi..
Thanks for the quick respond. You are simply great! I was pretty mad at myself cos' I throw away the headset's instruction so that mean I throw away the paring code given but then I gave "0000" a try hoping it will work, and oh boy, it did!
Now the only thing is I discover the SE2300's volume control, forward/backward song and the pause feature work fine but the only down side is once I pause the music using the SE2300, I can never get it to play again via the SE2300 as such I have to resort to pressing the "Play" button on my E71.
Is there a way to work around so that my SE2300 can pause and play?

E71 and Jabra BT250v headset - phone reboots

I've tried to pair and use my old Jabra BT250v with my E71. After paired, both works correctly, but if I turn off BT250v and then on, the E71 reboots.
I've tried the same with my wife's N95, and got the same behaviour. I used this headset with several other phones including Nokia 6120 and E51, Motorola V3, Treo 650, and other people use same headset model with several other phones.
Any clues?
Thanks!
Ricardo
Nokia E71-3 - Wireless Warrior

Thank you, I did go ahead and post there too, but have yet to receive any assistance.
Just got off the phone with both Jabra and Apple Care, neither can assist me but assure me it can connect. It does connect through parallels in Bootcamp, just can't figure out how to get it to opperate in XP PRO OS.
Thanks for responding....
Kitti

Centro and Jabra BT350 Headset

I have a Palm Centro and a Jabra BT350 which I like a lot. I just got hte phone and I paired it to the headset with success but when I try to make a call I don't get a voice command. I can redial a call but I can't get a voice command prompt. Thanks!
Regards,
Jeff
Post relates to: Centro (Verizon)

Centro_user12 wrote:
Yea, if I had spent more time on the forum then I would've found this out.
I guess I can still receive and redial calls can't I? This isn't a total lost I guess it could be worst.
Thanks for the reply!
Regards,
Jeff
Post relates to: Centro (Verizon)
Yes, those functions should still work. I know for a fact my Centro does this when paired with my motorcycle helmet system.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Bluetooth Pairing w/ Jabra Halo

I successfully paired my Jabra Halo headset with my iPad a few days ago. It worked wonderfully well for several days. Then I paired my headset with my MacBookPro just fine. I went to pair the headset back with my iPad, and now it won't pair with it. I have unpaired and turned off the Bluetooth on my MacBook and still my iPad will see but not connect to my headset. I have also turned the Bluetooth on the iPad on and off, as well as the headset. It doesn't matter what I do, when I turn Bluetooth back on for the iPad, it will see the headset, but the Wheel of Death just spins and spins and it never pairs. It doesn't even give me the option of putting the pairing code back in on the iPad. What do I do to re-pair the headset with my iPad??
Message was edited by: Loquos

It won't let me remove the headset from the Bluetooth menu. The button "forget this device" is grayed out. When I turn Bluetooth off and back on again, it still lists the headset and still displays the Wheel of Death and still has the button grayed out. I cannot for the life of me figure out what else to do. I have never before had such a problem with an Apple product, and I've been a loyal user for over 15 years. Maybe I am missing an update for my iPad? Is there anyway to 'reset' the device?

Jabra Halo 2 distortion in backpocket when listening to music on iPhone 5

Hi!! I just bought a jabra halo 2 and uses it to listen to music on iPhone 5... However I discovered that there are a lot of distortions when I placed my iPhone in my backpocket... I have search the forums and reset both my iPhone and jabra halo 2 as suggested but it didn't work... My iPhone 5 is on 6.1.2... Wondering if there are any more ideas on how to resolve this... Any help would be greatly appreciated!! Thanks in advance!!

Try restarting your phone by holding the home and off button down until the apple symbol comes up.

Jabra Halo stereo bluetooth headset skipping with IPAD...

Hi, does anybody here have ever used a Jabra Halo Bluetooth Headset with an IPAD or Iphone? I just recently bought this device and paired with my IPAD and iphone 3gs, and I'm very disappointed, sound quality is great, but the audio keeps skipping every once in awhile, very annoying especially if watching a video or listing to podcasts, perhaps there's a setting that I have missed? any advise would be very helpful, My firmware by the way is ios 4.2 thanks...

To be clear this is NOT an issue with Stereo Bluetooth headsets, it is a problem with the chipset in Apple's iPhone and iPad.
Prior to the iPhone 3 I had a T-Mobile Dash with stereo bluetooth and it worked beautifully. When I got the iPhone 3 the bluetooth was a disaster with skipping and dropping the connection.
I eventually went over to a Sprint EVO and the stereo bluetooth paired with my $300 Nokia noise canceling headphones was awe inspiring. I purchased an iPhone 4 and it arrived yesterday. Today I listened to those same headphones and got skipping and it even unpaired for no reason at all.
The issue with the iPhone 4 seems to be that when the screen is active there is no problem. However, when you lock the screen it starts skipping.
So, I just wanted to point out that stereo bluetooth has been broken on the iPhone for at least two generations and apparently on the iPad too which is extremely disappointing. It's not the headset mfg, its Apple.

When plugging in my headset, the sound continues to play on the ipad and not on the heeadset. Why?

When plugging in my headset in my iPad, the sound continues to play on the ipad and does not switch to the heeadset. Why? I did not have this problem before.

If you have used earphones in the past then I assume that you realize it takes a very firm push to insert the headphones into the opening - correct?

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

Check this out....
http://support.apple.com/kb/HT1664

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need?

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need? I have a SM58 type mic and-over-the ear headphones.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

Ipad and Sony HBH-DS205 bluetooth(A2DP enabled) headset pairing problem

Hi,
I have brought a HBH-DS205 headset. The bluetooth headset pairs with my X10i and I can listen to both the calls as well as the music played on the phone with these devices.
But, when I try to paid with my iPad, the iPad goes on searching for the devices and never lists the bluetooth headset. I tried removing the pair between the X10i and the headsets and then scan but is no use. Restarted the iPad as well as the headset but no use again. The iPad never shows the headset in the discovered devices list. Any one used this headset and paired successfully with iPad?

Read through the following KB article to determine if the Sony's specs are supported on iPad and, if so, how to discover and pair:
http://support.apple.com/kb/HT4111

Sound on ipad and iphone

Since updating to os7.1.1 i lost my safari sound on ipad and iphone

Hi pr1uk,
It appears your devices are experiencing audio issues. The following article provides steps which may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

I am trying to pair a Casio Gzone Ravine 2 to my IPad and not having much luck, any suggestions?

iPad and phone pair but when I try to turn on connection IPad says not supported.

For what purpose? The iPad only has the BT profiles for keyboards, speakers, headsets, car systems and sharing an internet connection. You can't transfer files over BT.

IPad and Jabra HALO headset

Similar Messages

Maybe you are looking for