IPad and wireless printer

How do I connect my iPad air to print to my wireless printer?

Read through this http://support.apple.com/kb/ht4356

Similar Messages

TS2235 Hi, how can I print from my IPAD to my wireless HP 6520 printer. I have a wireless network and my IPAD and wireless printer are connected to the same network. But when I send a job, I get the "no air printer found" message.

My windows firewall is disabled (protected by Comcast's Norton program) so that should not be a problem. Should I down load Bonjour?

Hello Bleedingblue65
Check out the section highlighted below to troubleshoot your issues printing through AirPrint.
AirPrint Basics
http://support.apple.com/kb/ht4356
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
Notes:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.
Regards,
-Norm G.

Why can't I print from my ipad 2 on my epson workforce 840 printer??? it show that there isn't a printer on my Ipad and my printer is wireless .

why can't I print from my ipad 2 on my epson workforce 840 printer ??? it show that there isn't a printer on my Ipad and my printer is wireless.

The 840 isn't supported by Airprint. See the list here:
http://support.apple.com/kb/ht4356
You may be able to use a universal printing app (check the app store), or Epson may make an app. Or you could get a more up-to-date printer.

HT1677 Safari says I am not connected but wireless shows 3 bars and I can use wireless lap top and wireless printer. Happened after downloaded ios7

Cannot use safari even though I have 4 bars. It works fine on lap top and wireless printer. Happened after downloading IOS7

Go to Settings > General > Reset > Reset Network Settings
After that Reset let the iPad reconnect to your Wi-Fi.

IPad and wireless keyboard do not pair any more

I always had (minor) problems, wehn vonnecting iPad and keyboard. But now iPad and wireless keyboard do not pair at all. Tried 15-20 times, fresh batteries, switched on an off, tried manually - nothing. I noticed that the green LED of the keyboard shines just for about 3 seconds when I switch on - but this has always been like that before. Latest OS of course. Who can help, please?
Lothar

Hi Lothar,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful if you are no longer able to pair your iPad with your wireless keyboard:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Best,
Jeremy

Hi, i have just scanned some docs via my Ipad and Epson printer. Saved them on a local folder! Where can i see and access this folder?

Hi, i have just scanned some docs via my Ipad and Epson printer. Saved them on a local folder! Where can i see and access this folder?

Welcome

Network Magic Pro 5.5 keeps dropping my router and wireless printer ...

...multiple times per day.
WIN 7 Pro 64-bit, SP1
Network Magic 5.5.9195.0-Pure0
Motorola Surfboard model SB6120 Cable modem
Windows Firewall configured by Norton Security Suite 6.2.1.5
Linksys WRT54G2 router ver.1
My problem is as stated in the header. My router needs to have the power cycled multiple times a day because it is dropping my internet access. This problem did not occur until I purchased in installed Network Magic. Also, the wireless printer needs to have the cycle powered almost as often. I've had both the router and wireless printer for more than 2 years and never experienced this problem before installing Network Magic
I manually changed my MTU setting to 1472 from Automatic. This has not helped.
Any other suggestions?
Thanks!

From what I know, the network magic software won't affect your internet connection since it is just a software to use to manage your network. You may want to isolate the problem first. You can try uninstalling the network magic software from your computers and try to observe your connection again.

Solution to Ipad/ Airprint wireless printing problems

I recently spent several hours trying unsuccessfully to get my ipad mini, IOS7.1, to print to an HP7525 printer using the airprint feature built into both units. I tried every trick offered on many Apple and HP forums but to no avail. I then discovered that my router, an ASUS RT-N1 3U does not properly support the Bonjour packet protocols which are essential to Airprint. So I bought a new router, the Canadian D-Link AC1200 (model DIR-860L), hoping it would solve the problem. It worked like a charm instantly. The Bonjour printer wizard now had the HP7525 in its list of printers and my IPAD mini could now print my Foreflight aviation charts, as well as anything else. It also seems to have solved another HP7525 problem whereby the wireless link goes down after 5 minutes and the printer has to be rebooted every time you want to print something. The link now stays up permanently!. I just hope my good fortune in solving these problems can be of use to others.
My PC operating sysem is WIN 7 64 bit.

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
    This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
    first if needed. More Wireless Printing help is here.
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Does iPad support wireless printing

I see that the new iPad has iPhoto can u connect iPad wireless to a printer?

It does support wireless printing. The printers that are listed on this page support AirPrint (the iPad and printer just need to be on the same wifi network for AirPrint printers) : http://support.apple.com/kb/HT4356 . If your printer isn't listed then you will need an app - the printer manufacturer may have their own app in the store that supports it, or there are a number of third-party printer apps.

HH5 and Wireless Printer

Just had my HH5 delivered, all up and running in terms of the access to the web, email client, and wireless devices such as TV and Ipads etc but I cannot get my wireless printer to work.
The printer can see and link to the hub, the printer shows up in the printer section of the network on the BB Desktop help screen, but I can't seem to see the printer in the Wireless device list under the Hub admin application.
I have been trying all sorts of people to help who are telling me all sorts of issues that I have done and still no success, I don't particularly want to pay £30 for a "tech expect" to show me a box that I haven't ticked or unticked or something like this which really should only be a 2 minute fix.
My HH4 and printe worked fine. ANy ideas anyone?

Hughes1973 wrote:
keith
It is linking to a 169.254....... Ip address, the printer seems to be fine in connecting to the actual hub, just the bit after that doesn't seem to work.
I will try your suggestions when I get home this evening and let you know how I get on, many thanks
Ben
That is not a valid home hub address, its a default local address, issued when the printer cannot get a valid IP address from the home hub, due to a connection failure.
It will not work with this configuaration.
Did you delete the old wireless connection from the printers setup, and then rescanned for the new hub, and entered the new wireless key?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Notebook using Vista and wireless print server and HP5500 printer problem

Installed std vista local driver for hp5550 printer with usb cable direct to printer. Works ok
Then, disconnected usb copper line to HP labtop and connected it into print server in router (D-link router to HP5500 printer).
Installed wireless network driver in labtop (vista os)(no updated hp driver available for Vista on HP site).
Print jobs just stack up in the que.
Used 192.168.0.1 address (which works fine for my other old win 98 computer).
Driver using the "raw" setting not "LPT"
Print Sharing is enabled.
Any suggestions?
p.s. The wirless system works fine on an old windows 98SE computer using the original 5550 installation disk.

Went back and installed the "Windows 2000 Print Server Software (from D-link Router 824vpn). I assume that this included the USP Shareport program that was recommend in a thread. I can now access router wirelessly. However, wireless print jobs go into que for hp5550, que emptys, but printer does not start up. Copper usb from printer to computer works fine (as separate printer)sta. Using HPdeskjet 5550 (HPA ) printer, port 192.168.0.1, printer name/ip 192.168.0.1, protocal 9100, raw setting, port 9100, LPR and SNMP are both blank. Any suggestions (OS is Vista). No drivers from Dlink or HP for this application. Thanks

HP DeskJet 712c Driver and Wireless Print Server Setup

I have recently purchased a MacBook Pro and am unable to setup my printer to print. Previous to using the MacBook Pro I was using a windows machine without any trouble printing to this printer, however now I can't locate the printer on a list of pre-installed drivers for Mac. I've already checked HP's website and was unable to find any drivers that were for Mac OS. What is a good alternative driver source? Once I do get the driver what would my next steps need to be to set up the wireless print server to work with my mac?
Printer: HP DeskJet 712c
Wireless Print Server: D-Link DP-311P
I would be grateful for guidance to go about this process so that I can use my printer again.
MacBook Pro 2.16GHz Mac OS X (10.4.6)

HP-provided drivers don't support network printing. You'll need to install Foomatic (a PPD interpreter), ESP ghostscript (postscript translator) and the 712c PPD from:
http://www.linuxprinting.org/macosx/foomatic/
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-DeskJet712C
Then, since we don't have the auto-setup software for OS X, you need to review the print server manual and find out which IP printing protocol to use. The easiest is HP Jetdirect (called TCP/IP raw port printing in many manuals) if it's available, because it doesn't require the device queue name.
Good luck.

Windows 7 and Wireless Printing

We have two xp machines that print fine to a wireless printer through wireless sonicpoints. But when we print through the W7 it only prints half a page and restarts. The printer is completely recognized on W7, I have turned off and on the Windows firewall and made exception. I'm wondering if there is some issue between W7 and the Sonicpoints. The sonicpoints have been recently upgraded on their firmware Any help would be appreciated.

OK, sorry about that.
Do you have a security system firewall that you can disable to test (Norton, McAfee, etc.)?
I assume you can type the printer's IP address into a web browser and "see" it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do you connect IPad to wireless printer?

I have a Kodak all in one office hero 6.1 wireless printer. How do I connect my Apple IPad to it so that I can print from IPad?

http://support.apple.com/kb/HT4356

Macbook and wireless printing...

I recently bought a HP Photosmart C4580 Wireless Printer. It's hooked up to my I- MAC and working fine. Does anyone know how I can enable my macbook to send documents so I can print to it? Any help is greatly appreciated!!!!!
Thanks!!!

What OS is on each computer? Is the printer directly connected to the iMac?
~Lyssa

IPad and wireless printer

Similar Messages

Maybe you are looking for