IPad APN setting not being permanently saved

Have new iPad and the APN setting keeps changing back to default, any clues?

The only thing I have found to solve this is the following:
1. Close all apps.
2. Turn off the ipad (holding 3 seconds the power and sliding)
3. Turn on the ipad
4. Before opening any app go directly to Settings and write down your respective APN.
5. Close Settings
After this, APN should be saved. I have realized that it is saved until I cross an spot where I don't have cellular signal (for example an elevator), when that happens I have to repeat the operation.
Hope it works for you and hopefully Apple fixes this soon.

Similar Messages

IPhone APN setting not being permanently saved

I have a new iPhone 3GS on O2 PayandGo. At least once every day my cellular data network stops working. When I check my Celluar Data Network I find my APN has changed from payandgo.o2.co.uk to idata.o2.co.uk. I then have to re-enter the correct APN and restart the iPhone.
This then works for another day or so before again switching back all on its own to the pay monthly setting.
Any ideas how to make it hold the edited APN setting permanently? (rather than reverting to the default pay monthly APN)

Setting the APN with the config utility does change the default setting so if I then reset the network settings it holds the payandgo name. However it still keeps loosing the connection and has to be over typed and the iPhone restarted in order to get a data connection.
I have noticed that the connection is lost either when I move to a different location and therefore a different o2 server or I am using free Wi-Fi such as the Cloud or BT Open Zone.
It seems quite a common problem as it has also been reported on the o2 forum by other users. However no one has fixed it and o2 do nothing more than replace SIMS.

NoViewOnDrive Setting not being honored in Common Save Dialog

To restrict access to my C: drive from users using the Common Open/Save dialog, I set the decimal value of the
NoViewOnDrives registry key to 4. This works well generally and if a user types in c:\ they get a message indicating that such access is redistricted. However, if they enter in c:\users\%username%, it brings them to their profile folder and
allows them to save (naturally as they have write access to their profile).
Q: Why is the NoViewOnDrives setting not being honored for C:\users\%username% yet it is for other paths such as C:\ and C:\users ?

Hi shocko,
Based on my test, the scenerio is as you stated. We can access the profile via inputing c:\users\%username%and can creare and save new file. Although you Prevent access to drives from My Computer, users still have right to save files to their
user profiles.
The easy way to prevent users to save data on a location is set folder redirection policy, redirect users’ desktop to a network share where users don’t have write permission.
Create a network share on your server, but don’t grant write permission for domain users group.
Hope this helps!
Regards,
Lany Zhang

Form & passwords being saved although set not to be saved

As stated above, I set NOT to save passwords & form data, but each login has that information auto filled. The dialog to clear saved passwords says there are none, yet all my logins have them and usernames already filled. Using Linux Mint Cinnamon OS.
Firefox on Windows and on my Mobile does not have this problem.

Note that the OP is on Linux, so this won't apply and help.
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My iPad mini is not being recognised by iTunes 12, can anyone help?

Version 8.1.2 iPad mini 1st gen
I am unable to sync as it is not being detected by itunes
i am using a windows pc windows 7

Hello there, fuuthat.
When your iOS device isn't recognized or detected in iTunes, the following Knowledge Base article offers up some great, in-depth steps for troubleshooting:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

IPad mail setting not responding

iPad mail contacts not working ,,, it goes to main screen ...

You can force quit it.
Double tap the home button. This will bring up a single row of app icons on the bottom of the screen. Find the mail one, hold down on it until it wiggles with a - sign in a red circle. Tap on that (doesn't delete, it quits it).
Click the home button again to exit that mode and then reopen your app. See if that clears it up.
What is your mail client? If it's yahoo, you may be experiencing one of their random outages.....they have been upgrading their service for months and when they're working on the part of the data base that holds your account it'll mess up until they stop messing with it.

Apn setting not available

can't change apn setting on the new iOS 8.1.2

Follow up to my posting above. The PH setting disappeared again last night after I got home. I brought it back today in my office after another series of steps 1,3,4,5,6 above. My theory (other than that something must be wrong with the iOS) is that the coming and going of the PH setting is triggered by the wifi that is it connecting too. For instance, a change in wifi might be the trigger. After fixing it in the office yesterday, it worked fine the rest of the day, through the night, until I finally got home then it disappeared again. Just a thought.

Bpm setting not being saved

I have found that when opening previously saved multitrack sessions the bpm rate has not been saved (it reverts to whatever the setting was in the previously opened multitrack session.) Is this means of saving information adjustable? If so, how do I do it? If not, it means that I have to keep a record of this data elsewhere which is not very convenient.
Thanks.

Happy to be corrected but I think this was happening in CS5.5 but may have been fixed in CS6
What version of CS are you running?
Edit: I thought one of the devs may have mentioned this

Save Output to: setting not being saved

This has been driving me nuts for a couple of years, so I figured I'd finally ask if anyone else sees this behavior.
My script grabs a PDF and converts each page to new, separate, PDF files using a custom name and number. There are three components: Ask for Finder Items, PDF to Images, and Make Finder Item Names Sequential.
My problem appears in the PDF to Images part. I have the "Save Output to:" setting set to a folder ON my desktop (Outbox). Every time I open the script it has reverted to "Save Output to: Desktop". I can change it, run the script from within Automator, and it works fine. If I save it (or save-as), when I next open the script, it will have reverted to Desktop. I have tried every iteration I can think of to get it to remember to store the files in the correct folder, but it just won't save this setting.
I am in the habit of just opening the script first, and changing the setting, then running the script before I have closed it, so this is no big deal -- but it does make it two more steps, which kinda defeats the whole purpose of automator.

Understood, but you mentioned scripts and AppleScript is used extensively with workflows. If there aren't any in yours, then all I can suggest is peruse http://www.automatedworkflows.com/tips/podcast.html
Also, see http://discussions.apple.com/thread.jspa?threadID=2039384 and Introduction to Automator tutorial at http://automator.us/leopard/video/index.html

Auto Login Setting Not Being Saved

I'm trying to enable auto login. When I go to sys prefs and set auto login to the userid I want and exit sys prefs then go back to sys prefs it is reset to the original user. Any ideas what is wrong?

Try to move this file on th desktop and restart :
youraccount/Library/Preferences/ByHost/com.apple.systempreferences.xxx.plist
HD/Library/Preferences/com.apple.loginwindow.plist
If doesn't fix the problem , put them in their original place.

IPad 2, mails not being sent when using reply to all feature

Hi,
Under BYOD we have iPads being allowed in our office environment. We have Lotus Notes Traveler servers setup for email access.
We are facing an issue with one executive users iPad 2 in the mail app.
The issue is when user is on WIFI and uses a long signature in the iPad and does a "reply to all" to any mail the mail goes and stays in the outbox.
Single reply or composing a new mail works fine. If we remove long signature, then "reply to all" works fine.
This issue is only with Wi-Fi, on GPRS everything works fine with long signature or without.
The iPad is on iOs 6, we tried resetting and restoring the iPad but the issue still persists.
Would really appreciate if you all could help me solve his issue.'
Thanks

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this: Delete the account in Mail and then set it up again.
 Cheers, Tom

How do I import photos from my ipad that are not in the saved photos folder

I do have a saved photos album and was able to import those. However, I have several other folders and I can't figure out how to get the photos from my iPad to my new iMac. Or for that matter, into the saved photos folder. This is my first experience with iPhoto. Any help? Thanks!

If you want to remove all of your synced photos .....
Connect your iPad to your computer and launch iTunes.
Select your iPad under the devices tab in the upper right or in the left sidebar, if you have the sidebar enabled.
Click on Photos at the top of the iTunes window on the right.
Uncheck the "Sync Photos From" heading
Click on Apply in the lower right corner of iTunes.
IF that doesn't work, create an empty folder on your desktop and call it "Empty Folder". Select that folder in the "Sync Photos From" heading in the photos tab of iTunes and then click on Apply. That will also remove all synced photos.

My ipad 2 is not being recognised by my laptop.

It says not recognising the hardware. I have tried both ways of opening, itunes first then plug in and the other way round ?

First things to try:
Different USB ports,
Different 30-pin to USB cable,
Restart the iPad (hold in sleep/wake button and home button simultaneously) then re-connect,
Try another computer.

Ipad 1, setting not opening,cant reset the ipad.

ipad 1, cant open setting,cant reset the ipad.

Try reset a few more times.
Hold the Sleep and Home button down until you see the Apple logo.

Motion "Field Order" setting not being honored by Final Cut Pro

I was having a doozy of a time bringing Motion files into a Final Cut ProRes 4444 Timeline (the entire project is basically motion). While my field order in both Motion and my Final Cut sequence was set to none, Motion text and graphics became blurry once I dragged them into Final Cut. I finally realized that (after stumbling upon this post http://discussions.apple.com/thread.jspa?threadID=1967373) that Final Cut was resetting the field order of the Motion project to Upper. It was said in this post that this was a bug. As this post was from April 2009 and it seems to still be happening, I'm assuming the bug hasn't been fixed, but does anyone know of a workaround avoid having to go into each Motion file in the timeline and switching the field order manually? Thanks!

AFAIK, you have to switch them manually. You can select multiple clips, do ⌘9, then in the multiple selection window, right click on the Field Dominance and one at a time, set it to None (or whatever you need). It's pretty quick.
Patrick

IPad APN setting not being permanently saved

Similar Messages

Maybe you are looking for