IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

Similar Messages

  • Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

    I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
    I recently updated all software/firmware as follows:
    1st Gen iPad - iOS 4.3 (8F190)
    iTunes - 10.2.1 (1)
    Remote - 2.1.1
    I am using an iMac circa 2005 (6.1)
    Mac OS X 10.6.7
    2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
    Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
    I have turned on Home Sharing on both iTunes and the Remote app.
    I have made sure that both iMac and iPad are on same network.
    I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
    I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
    I have trashed the preferences for iTunes.
    I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
    I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
    I have reset the router.
    I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
    Installed Mac OS X 10.6.7 combo update.
    Nothing seems to work.
    iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
    Anyone else having this issue?
    Any solutions?
    Thank you,

    same issue iphone 4

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Brand new IPOD Touch Apps no longer work after upgrading software

    I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
    Message was edited by: 2009 IPOD TOUCH

    I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
    The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
    Message was edited by: IPatronius

  • Keyboard shortcuts no longer work after upgrade to ios 6

    After upgrading to iOS 6, the keyboard shortcuts on my iPhone 4S no longer work.  Not only that I can't change them either.  If I add or delete a shortcut, it simply goes back to the way it was when I exit the settings and go back in.   My iPad 2 doesn't have this problem, only my iPhone 4S.
    I tried restarting as well as doing a reset (hold home and power button).
    Any idea how to fix this? 

    If you want to go through all the steps I took:
    1. Restart
    2. Soft reset (hold home and power until Apple logo appears)
    3. Reset keyboard dictionary
    4. Reset all settings
    5. Clear autofill
    Only after the last step did things start working.  Prior to that I couldn't make any changes I made to the keyboard shortcuts stick, though every now and then changes would take.  Sometimes trying to delete a shortcut would crash the settings app.  In all cases the shortcuts didn't work.

  • TouchID no longer works after upgrading to iOS 8.1 on iPhone 6 Plus

    TouchID no longer works for unlock after upgrading to iOS 8.1
    I have tried removing my fingerprints on file and re-adding without any noticed improvement in performance.

    Try a quick and rissoles Reset by holding the Sleep / Wake button and the Home button at the same time until the Apple logo shows then release the buttons and wait until the lock-screen returns.  Now open you iPhone with your code and then click the Sleep / Wake button and then depress only the Home button.  Now try you finger print. 

  • Some Of My Apps Do Not Work After Upgrading To iOS 4 And Fluctuating Wi-Fi

    After upgrading to iOS 4 on my 8GB iPod Touch, some of my audio apps do not work. CBS Radio just crashes, ESPN Radio stays on the "Station ESPN Radio data loaded" screen, and the iRadioSuite stays on "Connecting". Sirius/XM Online, iheart radio, Radio, and WunderRadio appear to work correctly. Also, I always had three bars for wi-fi signal strength on my home network before the upgrade. Now I get fluctuating levels that at times go down to two bars and even one bar. Needless to say, this is very frustrating!

    I also updated the iPhone 3G yesterday to iOS 4. I just turned on wi-fi on the iPhone. CBS Radio crashed on the iPhone but I got a steady three bar wi-fi signal strength level as I moved around the condo so this must be an 8GB iPod Touch and iOS 4 interface issue.

  • IPhone 4 apps no longer work after upgrade to OS 5.0.1

    After upgrading to 5.0.1 through iTunes, downloaded apps will no longer boot. I get a flash, then nothing.
    Of course, Apple wants $70 to tell me how to fix this.
    Has anyone else had this problem? Any suggestions? Hard reboots don't work.

    Some Users have Reported that a  Restore as New  has helped Resolve issues...
    Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Garmin ANT+  agent app no longer works after upgrading to Yosemite

    Hi,
    I have ANT Agent for my Garmin watch (version 2.2.2 - latest) which worked perfectly in Mavericks but no longer works in Yosemite.
    Can anyone help?

    ewaller wrote:
    Hello,
    Welcome to the forums.  Your post is fine in every way.  Introduction, problem description, what you have done -- perfect.  The package you reference is from the AUR which, as you know, is not in the main stream Arch distribution.  These community contributions are essential Arch, but have their own area in the forum to differentiate them.
    Moving this thread to AUR issues...
    As it turns out. This isn't a bug in AUR/easystroke. It is a bug in the latest xserver 1.10.902 (found in the "extra" repo)  Many applications are affected. Opera, chrome (if you are using the mouse gestures features for navigation) and it turns out that while i thought Maya wasn't affected, in reality, it is totally affected. most applications that use a mouse with right-clicks, middle clicks do not work properly.
    it's an upstream bug, that affects all distributions using the latest Xorg. I am not filing a bug report, because as i understand it, this bug has already been reported upstream by Ubuntu-devs (on launchpad).
    that latest update for Xserver, should have been tested better, before being an update available through pacman.
    On my system, i do not use any testing repos, only core, extra, and community. I do this to avoid situations, just like this. lol.
    I have work i need to get done today, but unfortunately, the only way that could happen is if i downgrade xserver (which i don't think is a smart idea). So, i guess i must wait for the next xserver update for arch. hopefully this happens in the next 24hours.
    I suppose i will have to use OSX for now, until this is properly addressed and fixed.
    anyway, i just wanted to point out that this bug has nothing to do (specifically) with Easystroke or AUR, that is just how i first noticed the bug. ( i just wanted to point that out, as you are a moderator ). This bug is in the main repos for Arch, and anyone updating today (or yesterday) will be affected, if they use applications where it's noticable.
    jordan

  • Apps don't work after upgrading to iOS 5

    After having my new iPad 2 to iTunes, answered one million questions, upgraded to iOS 5 and restored my content, MY PAYED FOR APPS DO NOT START, ANGRY BIRDS ALL VERSIONS, GARAGE BAND, SKYPE ETCETERA.
    I am SOOOOOOO frustrated overklig tjis. I have PAYED FOR these APPS and have receipts, and tjej Seouls Word.
    What has Apple done with them???? I want them back now!!!!!!!

    I just did some poking around on other Apple forums here and found a recommendation for an app which actually does take the embedded lyrics from iTunes and display them on the iPad. It's been around since November, so I don't know why I never saw it before. It's called Lyrics View and it works well. The only quibbles I have with it are that it doesn't display the title, which the Music app used to do automatically, and when you switch out of the current song it takes you to Songs rather than Artists or Albums, so you have to change to Artists if you want to hear someone else.
    It also displays the lyrics with the first lines all the way at the top of the screen, so they are sometimes hard to see behind the progress indicator, but you can make the indicator disappear with a click.
    At least there's a workaround until Apple fixes this, assuming that they do.

  • Voice control no longer works after upgrade to iOS 4

    Everything about iOS 4 has been great so far on my 3Gs, except that voice control no longer works. Holding the home button still brings up the voice control, and the "voice" confirms whatever action I say, but then instead of doing whatever it is supposed to, the phone just goes back to the home screen. Everything in voice control worked fine before I updated to iOS 4, so obviously it is a software issue. Has anyone else having the same issue?

    I'm having the same problems. I have a 32GB iPhone 3GS which I upgraded to iOS 4.0 (previously running 3.1.3).
    I've tried a full restore as well as changing the Voice Control language settings in General > International > Voice Control. I'm English and based in the UK and had my Voice Controls previously set to English (British). The weird thing is if I set my Voice Control to English (American) and then impersonate an American accent - then it works fine! Change it back and it's just the same - takes an age to finish recognising anything and then it's nowhere near what I said.
    Hope that info helps out in diagnosing the problem.
    J.

  • Why does Remote App no longer work since upgrading to IOS 6?

    Since updating my Touch to IOS 6, I can no longer use the Remote App to connect to my itunes library on my iMac.  I have tried both homesharing and "add an itunes library" and both have failed.  I have been through all the posted support articles with no success.  By the way, I can still use my first generation IPAD to connect with no problems.

    I have this problem also,
    We have an iPad 2, iPod Touch, iPhone 4,4s and iMac. 
    The printer is a HP LaserJet CP1525nw and is listed as a compatable AirPrint printer.
    The two iPhones and iPad 2 were upgraded to IOS6 last week.
    We wanted to print something out today and when selecting printer it came up with "No AirPrint Printers Found".
    This happened on the Other iPhone and the iPad as well. However all the other devices that were not upgraded still work.
    I have upgraded the firmware on the printer to the latest version, however this has not helped. I have restarted all devices as well as my network router multiple times to no avail.
    Apple need to provide a fix as this provlem is evidently as a result of their IOS6 upgrade.

  • IPad 2 email not working after upgrade to IOS 6

    HI, I upgraded my ipad2 to IOS 6 last night and now I am not receiving emails and it is taking a long time to send emails.  The app says 'connecting' and then hangs with no email coming in and eventually get an error message... 'Cannot Get Mail"  "The Connection to the Server Failed".  It did allow me to create a test email and send it however it did not appear to be actually sending the email... it finally sent the test email after 15 min.  I did not have any issues with email prior to the upgrade and was not getting any connection failed errors.  Thanks Sue

    I had a problem connecting to my exchange server.  It turns out that Exchange will only allow ten devices to be partnered to your account at a time.  Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships."  I followed the instructions and delted all the old accounts...problem solved.

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

    On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
    They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
    do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
    I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
    Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

    Hi,
    When you start Messages fro the first time you are asked for an Apple ID
    When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
    The App should have also picked on on those iChat Accounst you had before.
    These should be Enabled if they were when you last used iChat.
    Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
    In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
    Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
    This will give you separate iChat type Buddy lists.
    You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
    You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
    I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
    There is no Buddy list for iMessages side
    No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
    Obviously an Apple ID can be an email or look like one.
    In some cases they are also valid AIM Screen Names as well.
    In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
    11:31 PM      Saturday; August 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for