Ipad audio stream stops

I've had the ipad (new) since April 2012. The problem arose not long after the purchase and doesn't seem to be getting any better, no surprise! The problem being, audio stream stops. Sometimes the stream can be restarted by nothing more than opening up the audio steam homepage, or sometimes starting a different audio file within the homepage and then click back to the original stream, all the way to turning the ipad off and restarting...and even this has mixed results. At times even using all of the aforementioned has mixed results with varying intervals lasting anywhere from 30 seconds to 15 minutes, then at times can last for hours. I've double checked the problem comparing simultaneously with my laptop and it appears the problem is ipad only. There are numerous online posts concerning this but haven't yet found a solution to the problem.
Thanks to anyone helping with the resolve!

Nah, forget it; I just remembered what really used to happen (which still happens):
I used to open a new Safari window (not a new tab), open the radio stream in that new window, then switch to my previous Safari window with all my tabs. Then it works.
For some reason, I don't have to do this (i.e. open two different windows as opposed to two tabs) in Firefox.
I really like and prefer Safari to most browsers, but I have to admit, it's rather flaky in a number of ways. This is one of them.

Similar Messages

  • Audio stream stops when I switch to another tab in Safari

    I've got this radio station website which links to a live stream so you can hear the station online. It worked fine a couple of weeks ago, on my Powerbook G4 running 10.4.9. Then my Powerbook died.
    Enter my new MacBook Pro, still running 10.4.9. I try to listen to the same station, but everytime I start the stream, then switch to another tab to browse the internet, the audio stream stops.
    BTW, the audio stream behaves properly when I use Firefox. Is there a reason why Safari can't keep on playing the audio stream when it's not in the active tab? Or have I got a bad configuration?
    Many thanks, as always.

    Nah, forget it; I just remembered what really used to happen (which still happens):
    I used to open a new Safari window (not a new tab), open the radio stream in that new window, then switch to my previous Safari window with all my tabs. Then it works.
    For some reason, I don't have to do this (i.e. open two different windows as opposed to two tabs) in Firefox.
    I really like and prefer Safari to most browsers, but I have to admit, it's rather flaky in a number of ways. This is one of them.

  • On my ipad video streaming stops after a few seconds only sound is playing .what could be the reason.

    on my ipad 2 video streaming stops after a few seconds, only sound is playing .what could be the reason and how to solve this problem.
    I have a feeling that it may have started after upgrading to ios6.

    Hi,
    Is this failing with Error 20 ?
    Sometimes in a the router or modem if you use Port Forwarding then you are your Buddy may be missing the Screen Sharing Port.
    The Screen Sharing part uses a different port to the Audio port.
    As the port for Audio (And therefore Video) are known and can be port Forwarded it is the random Screen Sharing port that can be the problem.
    iChat 3 info http://support.apple.com/kb/HT1507 that includes Bonjour and Jabber info
    iChat 4 info http://support.apple.com/kb/HT2282
    If you are not using (or your Buddy) UPnP then I would change the method of opening the port to that.
    6:14 PM Saturday; June 20, 2009

  • Audio streaming stops after about 13 minutes.

    Audio streaming over the Internet just stops after about 13 minutes and has to be restarted. I need a solution

    Thanks for your help! You helped solve the issue, albeit indirectly...
    At this point, I want to share my experience, in the hope that it might be helpful to others:
    After finding that chapter markers had nothing to do with the problem, I found that indeed my camcorder was set to the dreaded 12 bit. Oh dear! The original DV tape is long gone. (At first I did not expect this to be a problem, since I had made several DVDs successfully with the existing settings, but then there are all these horror stories in discussions about what 12 bit can do to you.)
    So to rescue my movie, I found advice to "share" my iMovie back to a fresh DV tape, and then re-import it with the 16 bit setting.
    This lead to the next issue: After a number of minutes of re-exporting to DV tape, the video received by the camcorder would freeze, while the audio continued. This happened at several different points in several differerent attempts.
    So next I visited iMovie discussions, where I found advice to clean up my Mac. I used Mac Sweeper, and now indeed my Mac runs faster and smoother for many apps. I also downgraded my QuickTime version. But another attempt of exporting from iMovie to DV tape also failed, but now it failed at exactly the same point where the audio stopped in my DVD!!! (Even though on the export-to-DV-tape it was not the audio but the video that froze.)
    Next I found that when playing that problematic scene in iMovie, the iMovie program would also freeze at that very point, making it necessary to "force quit" out.
    In the end the solution was to chop out the problematic bit in that scene. Now everything works fine, including the iDVD step.

  • New Media Server Install; audio stream stops/starts constantly

    We stream a weekly radio show and even just testing with no listeners and there is no server load, our stream stops and starts continuously. It seems like a buffering issue but we're not sure where to start looking. It happens from many different locations geographically.
    I'll be happy to offer details if anyone has some advice.
    We are streaming our first live show with this new stream setup from http://www.pulpmx.com/pulpmx-show at 9PM PST tonight. We are actually just running some music right now as we try to troubleshoot what is happening.
    Thanks

    Well let me start by clarifying, we have a server setup with 2 cPanel accounts, one of which is a standard http site, the other has its own dedicated IP and domain which we use solely for our streaming server installation.
    We were using the http protocol earlier for streaming when we were having troubles; we have since switched it to rtmp and the issues went away. This is problematic though because we cant load the rtmp stream into iOS clients (including our App).
    So, we're pretty sure the issue was a conflict of sharing the same hardware for a true http website delivery and also an http streaming delivery. Would you agree and is there a way to make this all work together in harmony?
    Thanks.

  • IPad video streaming stops half way on long videos

    We have 2 iPads in this house and both choke on streaming long videos. I have a very fast internet connection with an Apple Airport Extreme and an Express bridged in, which gives me full bars everywhere in the house. I have no problem streaming video on any other device in the house. The problem with the iPad streaming is worse using the YouTube app built in. Here's an example of a long video that plays about half way and then you can see that the buffer stops building up and slowly the video that's been buffered is played and the device stops playing. It's as though there's a limit to the cache file on the iPad and beyond a certain size it stops taking on more. Please try playing this file all the way through and let me know if you can http://www.democracynow.org/ .

    LOL — play that show all through its 59 minute length? Oh, I think not ...
    The claimed speediness of the network isn't that significant. More useful would be to look and see what speeds you're actually getting, using any of the speed test apps.
    Streaming performance on the iPad is also at least partially app-dependent. We routinely stream full-length movies over Netflix with few to zero problems. Next in order would be ABC leading Hulu+ by a neck, then YouTube a distant 4th.

  • AirPlay stop audio streaming closing iPad control app

    Just bought AirPort Express.
    Wifi connected to my NAS, used to stream music to my old stereo that is in another room using analogic audio out.
    Opening iPad control app I can select and play music, but when I close the app (not leaving in background, closing down or shutting down iPad) the audio stream stop.
    In the control app (DS Audio from Synology) I also can't select AirPort Express as player in settings, only iPad is listed. I can correctly select AirPort for AirPlay.
    NAS firewall is configured to allow AirPlay, AirPort firmware is latest release, I use iPad 2 with iOS 6.01.
    Any suggestion?

    also i want to specify something............if am using loopback address,the sender and receiver(in this typical code,capture and receive files) ought to have diff. ports( i suppose as their ips are already same)
    or am i wrong???
    i have given same ports.......i had tried once with diff. ports........miraculously perhaps it worked (the sound was echoed through my headphone),....but next time when i tried i failed......and still failing........any suggestions please waiting eagerly

  • Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

    I am Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.  I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream).  When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD.  All device are on current releases of software.  I have no Video hooked up to the Apple TV.  How do I correct this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Airplay streaming stops when you turn off the iPad screen

    Hi All,
    If you are streaming something from your iPad using Airplay, and you hit the button to turn off the iPad screen, it seems that the streaming stops...
    Is there any way to fix that?  I mean, if you are watching a long video, for example, you don't want your iPad to remain on the whole time.
    Any advice?
    - Thanx
    - Jon

    Jon-
    You are saying the AirPlay App does not work when the iPad goes to sleep.  Other Apps do, including the Music App, so you might expect AirPlay to work as well.
    Another limit may be the timer setting at Settings-General-Auto Lock.  Mine is set to 5 Minutes by default.  You may need to set yours to Never, to keep the iPad from sleeping while streaming.
    I suggest you provide feedback to Apple at <iPad Feedback>.
    Fred

  • TS4085 iPad 2 mirroring audio streaming issues - TuneIn radio

    I have an iPad 2 with Apple TV. Both are up to date. I am streaming TuneIn Radio audio over AirPlay (mirroring) through Apple TV to home stereo receiver, via Toslink optical audio cable. When I am using other iPad apps, the signal breaks up. (I do not have this problem when streaming from iPad 2 via bluetooth to wireless speakers.) What is the fix?

    Hi Sean
    Album cover art is not showing on apple tv from Tunein app on Ipad.
    Cover art is on ipad while streaming radio van Tunein.
    Music is playable through apple tv.
    Unfortunately the album cover art dos not appear on TV.
    Any ideas?
    Thanks
    iPad 2

  • Audio recording stops after a few seconds on iPad 1. Any suggestions?, Audio recording stops after a few seconds on iPad 1. Any suggestions?

    On an IPad 1 even after a full restart, and only application running, I'm finding that Audio recoding stops after a few seconds. The duration seems to be fairly random between 5 seconds to 25 seconds. Creating other tracks seems OK.
    Any ideas would be appreciated.

    I've seen this issue in the past.  I think it is connected to the operating system itself.  I say this because I reinstalled the os using itunes and then restored a backup.  Then garageband started behaving again.  Then the issue came back - after I did an os update.  So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
    Hope it helps
    @zorin

  • I can not get an audio stream from any TV channel on ipad

    I can not get an audio stream from any TV channel on my ipad ,please help me fix this problem

    Muneer-
    What App are you using to get the audio stream?  Safari should work unless Flash is involved.
    I have used the free NPR App to listen to radio stations, but I don't know if it works with TV stations.
    Fred

  • How can I record an audio stream to my iPad mini?

    How capture streaming audio to mini

    You'll need an external audio capture device hooked up to your iPad.
    This article lists a bunch:
    http://music.tutsplus.com/articles/top-30-devices-and-interfaces-for-ipad-audio- -audio-16640

  • Why does iPad audio stop working?

    That's just it. With nothing running, the iPad audio stops working.  All app runs, but nothing comes out of the speaker. 
    It's so bad I had to stop using the iPad as my alarm clock and calendar since it's gone mute.  It has gotten progressively worse, but as I keep it updated I don't know if it is a progressive hardware failure or the new iOS updates. I went and removed almost all the apps, even did a factory reset thinking it was a memory issue...nope.  Even if all I run during the day is the built-in calendar, notes, and clock, or on some days, absolutely nothing, the audio still randomly stops.
    Guess it's time for a new tablet? My experience with support and this tablet in particular will weigh very heavily in my decision making though.  

    When audio stops working from the speakers do earphones still work?

  • AS3 stopping audio streaming inside a layer

    Sometimes I get ahead of myself and have to stop and say how the hell did I do this before? I'm referring to a simple stop button I need to put in a flash animation. I know how to code calling a sound from the library, starting and stopping. But how do I stop audio that is streaming inside a layer from a button ?
    var my_sound:Sound = new Sound();
    my_sound.load(new URLRequest("yoursoundfile.mp3"));
    var my_channel:SoundChannel = new SoundChannel();
    //2.
    play_btn.addEventListener(MouseEvent.CLICK, playSound);
    stop_btn.addEventListener(MouseEvent.CLICK, stopSound);
    //3.
    function playSound(event:MouseEvent):void{
    my_channel = my_sound.play();
    //4.
    function stopSound(event:MouseEvent):void{
    my_channel.stop();

    OK what I actually need is a mute and play button for the audio track
    So how can I stop, or in this case mute the audio without stopping the animation, follow?
    example, volume is at 100
    click button volume goes to 0
    click same button or another button volume goes back to 100

Maybe you are looking for

  • How to create business partner in a specific role

    Hi experts, We are implementing CRM 4.0 Business package in EP 7.0. When we checked the business partner creation screen, we couldnt find an option to create the business partner in a specific role (eg, prospect, sold to party, ship to party etc). Wh

  • Can send mail but not receive -- connection doctor OK, GetInfo shows msgs

    In the last couple of days I stopped receiving email on my Mac in the Mail app, but not my PC. Both access POP3 accounts at the same ISP, different POP3 accounts. All software is patched to latest version using Software Update -- PowerMac G5 Dual, la

  • Self assigned or trusted certificate for no Gateway scenario

    hi, 1.  RDS server 2012 R2 is deployed and I can access published app by https://servername/rdweb 2.  RD Gateway will be never used (only LAN connections) 3. Would self signed certificate prevent to achieve THE GOAL: need to publish an app by providi

  • How to retain leading zeros in an excel sheet

    Hi, In my application I need to export the response from a struts action class to an excel sheet. I have done the coding but while exporting to the excel , the leading zeros are getting truncated. If the value is '01' it is displayed as '1' only.    

  • REGARDING SAP UTILITIES

    Hello everyone,                        plz. tell me in Device Management, What is Third party Billing?