Ipad Bluetooth airport base station hack

Is it possible for someone to hack into iPad2 via Bluetooth to access airport base station app and get onto my wifi connection? I had iPhone 5 and iPad 2 connected. Suddenly airport utility show disconnected and the name of iPhone device is changed. I turned off wifi on the phone and still shows 2 devices connected. Also I noticed Bluetooth was on for the iPad which I always keep off.

No, not possible. You're clutching at straws...

Similar Messages

  • My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
    I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
    If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it?

  • Hi, Some one hacked into my AirPort Base Station, which initially I had not secured with password. Now they took control by adding their own password. How can I regain ownership back?

    Hi there,
    I have an intruder into my AirPort Base Station wireless connection. The Station initially I did did not protect it with a Password, so the intruder branded it a name and put on a password. Is there any way I can deactivate the intruder's password and regain ownership?
    Thanks for your answers in advance.

    Some one hacked into my AirPort Base Station.....
    No, they did not have to "hack" into your AirPort at all.  Since the door to your wireless network was wide open, they simply walked right in.
    Is there any way I can deactivate the intruder's password and regain ownership?
    Hold the reset button on the back of the AirPort in for 9-10 seconds, and then release. Allow a full minute tor the AirPort to restart to a slow, blinking amber light.
    The AirPort is back to new, out of the box settings. You can can now reconfigure it again......hopefully this time with a password.

  • HT1947 Airport base station doesn't let iPad make changes

    Airport utility doest seem to work with my ipad
    Airport base station doesn't let iPad make changes

    Sky the problem.

  • My TP-LINK TD-W8970 router cannot connect with my iMac even though my iPhone 5, iPad 3, W7 laptop and LG smart TV can. I get the message "No configured AirPort base stations have been found". Any ideas please?

    My iMac cannot connect to my TP-LINK TD-W8970 router even though all other computers can. I get the message "No configured AirPort base stations have been found" and "No PPPoE configurations were found". Any ideas please?

    Open the Network pane in System Preferences. If there's a closed padlock icon in the lower left corner, click it and enter your administrator login password when prompted.
    At the bottom of the service list on the left is a popup menu with a gear icon. From that menu, select
              Set Service Order...
    A sheet will drop down showing all listed services. Drag the one that you want to use to connect to the Internet to the top of the list. Click OK to close the sheet, then close the preference pane and confirm when prompted to save the change.

  • Losing connection with safari using airport base station

    Airport base station. Frequently loses connection with safari, even though the station shows green. Same problem with all our devices, IMac, MacBook Pro, IPads, Iphone etc. However, disconnect not at the same time, some devices works, others don't.

    Hello sjobizz,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628?viewlocale=en_US
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    Best of luck,
    Mario

  • Why does my Airport Base Station continue to disconnect?

    It works fine until it just goes out. Every once in a while it just goes out at random times even though it is still connected to everything (computer, modem).I do this to create a wifi connection for my family and I. I have tried all of resets and it still goes out. I do believe it might be something internal. If so, can someone please elaborate more on this. If not, can someone give me some information on how to fix this. Thanks!

    I see you are running Windows 7.  Apple just came out with a firmware update for Airport Extreme (7.7.2).  It so happens that this Firmware version requires Airport Software version 6.3 or newer.  The Windows version only goes as high as Version 5.6 or so.  I was also told that Apple is unlikely to upgrade this software.  To make a long story short you need to control your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app.  This solved my problems.  Good Luck :)

  • How To use MacBook Pro as airport base station?

    I am trying to set up my MacBook Pro as an airport base station to share my Internet connection. I am running OSX 10.7.2. I have checked Internet Sharing, and checked "Share your connection using "Internet" to computers using: ______________." There are five options, but "Airport" is not one of them. Has this panel changed in Lion? So how do I share the connection?

    palenoue wrote:
    Got an iPad, got a macbook pro running 10.6.4, got an ethernet cable running to my cable box.
    Now how do I set up my laptop to be a wifi base station so I can access the net with my iPad?
    Tried searching for a how-to here on Apple's site, got around 500 hits that had nothing to do with setting up a powerbook as a wifi base station. Seriously, Apple, this is worse than worthless, it's highly frustrating. You need to fix your support search.
    And after you follow the directions in the link provided by JimHdk, you can get yourself a wireless router. Using a wireless router will eliminate the need to have your Macbook pro present and powered up every time you want to connect your iPad to the Internet via wifi. Just because your Macbook Pro can act as a router does not mean it should or that you have to use it as such. A router is specifically designed to do what you want to do.

  • Set up an airport base station

    I am trying to use a family members Internet thru wifi and the network shows up as a airport base station. It says that it cannot be set up by this software.
    So how can I connect to wifi on my iPad 4? My iPhone 5 had no problem identifying the network like usual set up of wifi?

    Since you have an iPad question here....you really should post in the iPad support forum. The experts over there may have some additional ideas for you.
    Using iPad

  • Using AppleTV as an Airport Base Station?

    Can I connect the ATV using ethernet and then use the AirPort part to extend the range of my WiFi network?
    I'd like that, because my house is made from thick reinforced concrete and WiFi signals have a hard time getting through. Connected like this, the ATV would much improve the WiFi reception in the living room so I can have a better connection with my MBA on the couch (close to the TV is probably an ideal airport base station location for iPod/iPad/MBA).

    No

  • If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

    I operate an old airport extreme base station 802.11n (3rd gen).
    There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
    I get a sense that the iphones may/will be useless the new airport.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    Thank you.  

    I get a sense that the iphones may/will be useless the new airport
    They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

  • Old airport base station quits working several times and week and won't let

    me change the password.
    I changed the password on my ibook and reset the airport base station but it still will not change the wpa2 password to the new one. I'm changing the password to rule out anyone having hacked into the network. Several times a week the whole network goes down and I have to turn off power to the base station to get it working again.
    I have plugged it into a battery backup ups but that has not prevented it from crashing.

    Pick, a quick Google search for "Airport Firmware 5.5.1" yielded the following link:
    http://mac.sofotex.com/download-122643.html
    I sense you're getting frustrated - I have a gift for such perceptiveness. Anyway, I wish I could explain your problems but I have no magic bullet for what you're experiencing. All I can offer is to suggest you download and install the above firmware. Hopefully the link works; I haven't tried it. There may be other ways of obtaining 5.5.1 but none was immediately apparent from Apple. Once installed, stick with firmware 5.5.1. As I noted I suffered major problems with 5.6 and have heard anecdotal reports of similar problems with 5.7 though apparently they're much rarer. My Extremes run literally forever without problems so I hope yours can too.
    Next, disable all the encryption on your network for the duration of your troubleshooting. Simplify things as much as possible - remove all but one wireless client from your network. Perform a "hard reset" of your Extreme and reconfigure it from new. Run things like that for a while and see if anything changes.
    Is it possible you're suffering from poor power quality e.g. dropouts, surges, sags, etc? Have you tried a UPS or at least a surge suppressor? I had a spell last summer when the utility would shut off power for a half second a day, literally, a half second, once a day, every day, for weeks. It drove me nuts. They immediately stopped this nonsense the moment I started running my Airport off a battery.

  • HT3728 how do you switch airport base station controls from 1 computer to another?

    I recently purchased a macbook air (love it!) and I'd like to change out the the airport base station control access to my new macbook air from the PC that I initially set it up with. Is this possible to do without having to do a factory reset on my airport base statsion?  My PC is on the verge of klonking out any day...

    You can access your Airport from any device that has the Airport Utility installed as long as you are hardwired or in range of the network - I am not familiar with the new Macbook - it might already have Version 6 in utilities - this is the newest version and it is somewhat streamlined - if you want the same functionality that you are used to in the Windows version, then try and download 5.6 for your Mac - you can also use the mobile version by downloading the app to an Ipad or Iphone but is also a less functional version.

  • HT3728 I have forgotten my password. How do I reset for a new password to update my airport base station.

    My Airport Base Station needs to be updated & asks for my password. I did not set it up & can't remember the password. How do I reset my password for my Airport Base Station? This is causing me problems.

    Please see this User Tip:
                     AirPort - Regain Access from Forgotten Passwords

  • How do I share my DS4600 USB on Airport Base Station?

    It's true I'm not the most Mac savvy, but everything I've read seems to indicates this is plug & play, but so far not for me. 
    I have a SmartStor DS4600 (by Promise Technologies).  It's set for RAID 0, just recently formatted with "Journaled HFS+".
    So, it's definitely an Apple partition. 
    I plug it into the USB port on the back of the Airport Base Station (2nd Generation)(running version 7.6.3).
    According to documentation, I should just see the volume for the DAS show up in my Finder, but I don't.  Only if I plug it in to a USB port on the actual computer.  (MacBook Pro, OS 10.8.3)
    I do see my Airport in Finder, and I do have a volume called "Data" that I can access... but no other disks.  I also thought maybe the extra HD space would be added to the existing Airport Disk.  It isn't. 
    Sort of at a loss, and I can't find any documentation that explains how to troubleshoot. 
    The ultimate goal is to use the DS4600 to hold my iTunes library.  I doubt that information helps, but it couldn't hurt. 

    That information helps. If you want to use one of the SmartStor's disks as a repository for sharing your iTunes Library, then do not configure that disk as a RAID. Format it with Disk Utility using the Erase tab. Mac OS Extended (Journaled) is the correct choice.
    Connect it to your Time Capsule, then use AirPort Utility to configure access requirements for sharing it on your network. It should appear as a shared volume in the Finder, available to all your Macs as you thought it should.
    I also thought maybe the extra HD space would be added to the existing Airport Disk.  It isn't.
    Correct. There is no way to do that. The only way to increase the capacity of a Time Capsule's hard disk is to replace the Time Capsule (or its disk, if you are amenable to disassembling it) with a larger capacity model.
    If you also want to use the SmartStor as a RAID, that is another story, and you should probably attack that problem separately.

Maybe you are looking for