IPad calling for iCloud backup but will not unlock so i can connect to wifi ... help
iPad calling for iCloud backup but will not unlock so i can connect to wifi ... help
thank you for replying:)
but i tried all of the tips in the link and it still didn't work, does anyone else have any ideas?
and just to add another issue, i went under General>About>WiFi Address and there is one and i still cannot access the internet.
Message was edited by: kailey65
Similar Messages
-
Need help... getting an error message "not enough storage" for icloud and it will not let me get passed the message
See if this helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Can anyone tell me what to do my ipad 2 is frozen reset but will not come on seem the apple logo which disappeared and now is frozen
I really can't tell from your post but did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I cannot get scrabble to work on my ipod touch. It only works on my macbook. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?
Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed' -
My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!
Hey there Kellee,
It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Start with these three steps, and there are more in the article if you need them.
1. Update iTunes
Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
2. Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
3. Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
Reinstall iTunes for Windows XP
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software. -
HT4519 I'm trying to send out email but will not send. How can I stop this on my IPhone4?
I'm trying to send out an email but it will not send. How can I stop this on my phone?
See:
iOS: Unable to send or receive email
It appears you have a incorrect entry in the setup. Google for:
setup xx email on iphone
where xx is your provider. -
Icloud control panel will not open. " You can't sign in because of a server error".
iCloud control panel will not open. I keep getting an error message; "You can't sign in because of a server error". How do I sign in?
Here we are in 2014 and they still havent resolved the issue .. not impressing at all ... **** poor deisgn ... think these geeks wouild have figured it out by now
-
My ipad is plugged into the wall. It is locked and telling me to backup to icloud. I can not unlock it even after I press ok. Do you have any advice?
A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.
-
My iTunes IPad app bought in the Us Apple Store online will not download the update for HayDay. It gives me a message that the app was not bought in the French store. How do I change to the US Apple store to resume updates to my application HayDay.?
Click here and follow the instructions to change the iTunes Store country.
(85459) -
HT1414 iCloud backup window will not close . . ? stays open and block main screen use
popup window warning "iCloud backup" will no click off . . blocking opening main page . . . cannot shut down.
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
IPad finds bluetooth Altec speaker but will not pair
I had been using the Altec Lansing in motion Soundblade bluetooth speaker with my iPad with no problem. I brought it on vacation and paired it with another device, and now the iPad will not pair with it. It finds it when it searches, but when it says "not Paired" in the box next to the device number. When I choose it to pair, it thinks for a few seconds and goes back to not paired. Any advice would be appreciated. Thanks!
Do you have the other device that it was paired with? Sometimes you have to un-pair a device before you can pair with another. For the iPad you do this by douching the button that say forget this device. Removing the battery from the speakers for a little while may also work.
-
I have updated to the latest version of iPhoto. But now iPhoto will not let me amend the preset text in the text boxes.
the text is highlighted for a nano second but it will not stay highlighted so that I can add my own text.
can anyone help me with this issue.
Many thanksYou might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.
Maybe you are looking for
-
Will not set up testing server
I have done this in the past many times. Recently DW 8 will not set up a testing server when I chose local network. I am running Windows XP Pro, version 5.1, Service Pack 2. This is driving me crazy. Any help. Also, I can figure out how to call and p
-
IPad mini screen won't orient to landscape
My iPad mini is up to date and I have checked the general screen and toggle settings but the screen won't rotate to landscape. How do I fix this?
-
Problem executing external command in OS400
Hi, When i try to run an external os command from SM49, i am getting the following message, but ideally the message should display, job has been sent. Can anyone one help this out. Command executed: sbmjob : CMD(CALL PGM(SEAEDIPGM/EDISLCCL)) JO
-
2 iPhones + 2 MobileMe Account + 1 iTunes
Currently my wife and I both have iPhones and sync them to our indivdual accounts on our iMac. My question is that I have iTunes and out library is on my account how can I get her account to see my library and snyc from the same music?
-
Hai gurus, I have one doubt in REM product cost calculation. 1) when I am running PCC for REM I met with following error as - Routing does not match with selection ID 01. How to correct the error. Regards, sekar chand.