IPad can't connect to router

Hi,
I have a WRT320N router with firmware version 1.0.01 build 008. I just got an iPad and while it can find my router, I can't access the WiFi when I enter my password. I can use the router with my laptop so I know the connection and password are ok.
I've seen two administrators on here suggest the same thing. And one person responded that it worked. The identical directions were:
Try changing some advanced wireless settings on the router.
Connect the computer to the router with the Ethernet cable. Open the setup page of the router.
Click on wireless tab and set the configuration view to manual. Change the wireless channel to 11. Save the settings.
Go to wireless tab and click on Advanced wireless settings.
Change Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
Try to connect to the wireless network again and see if that works.
My problems are:
1 - I think my computer already is connected to the router with the Ethernet cable - I mean there is an Ethernet cable attached to both my computer and my router - in slot 1 on the router
2 - the only thing I know how to access is the Linksys EasyLink Advisor. What and where is the setup page of the router?
Thanks - I'd hate to think that if I can't get my router to work, I just wasted the savings on a WiFi only iPad and instead will have to get one of those devices to attach to the iPad that allows you to connect to the internet wirelessly - like the "Clear" device.
Solved!
Go to Solution.

Thanks gv. I'm not so knowledgable as to change the LAN of my router. So I did what you said, as a former colleague used to yell at us "read the **bleep** manual"
I was able to change the settings as suggested in the advanced wireless tab. But, in the basic wireless settings tab, I don't have the option of channel 11. What I have are:
36
40
44
48
149
153
157
161
And I can only change the channel if I select a channel width of 20MHz only. My other option is 20MHz or 40MHz but that option does not allow channel selection, channel is set to auto instead.
I really appreciate any help I can get. I'm quite the novice and get frustrated easily. Thanks!

Similar Messages

Wi-fi bridge between two routers TP-LINK WR841ND (WDS). HP 1536 dnf MFP connect to one of this routers (copper). My Ipad or Iphone can't find HP 1536 dnf MFP (using Eprint). Ipad and iphone connect to router across WiFi.

Hello.
I have wi-fi bridge between two routers TP-LINK WR841ND.
The name of this technology - WDS.
HP Laser JET 1536 dnf MFP connect to one of this routers (copper).
Second device (my NETBOOK) connect to second router (WiFi).
I have good communication between NETBOOK and HP Laser JET 1536 dnf MFP via WiFI-bridge.
In usual case NETBOOK can find (and can Ping) network printer and make a print some files.
But my Ipad or Iphone can't find HP Laser JET 1536 dnf MFP (using Eprint). Ipad and iphone connect
to router across WiFi.
Please, help!

Are you using the ePrint Mobile App, the ePrint Printer Control App, or just trying to send an email to the printer's ePrint email address?
Does AirPrint work?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IPad can't connect WiFi

iPad can't connect WiFi, if need to repair it?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My ipad can't connect to air printer?

my ipad can't connect to air printer?

Restart your router. Unplug it and let it reset.
While you do that you might as well power down the printer and restart the iPad / iPhone as well.
Power everything back up, and AirPrint should be restored.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to mu US account.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to my US account

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Can't Connect to Router Manager

I want to review the Router Statistics but can't get connected.
I have typed in the address,
http://192.168.1.1/
Also tried via the Router Icon &
http://voyager220v.home/
but get message "Can't Connect to Router"
All other web sites are easy to get into.
Any idea of why this problem is occurring?
Solved!
Go to Solution.

Have you tried rebooting the Voyager or resetting it to default by pressing the recessed reset button.
Are all the lights on at the front, and the correct brightness?
Failure of the Voyager 220V power supply was fairly common, but any 12V regulated power unit will work, if it has failed.
The Voyager range of modems were some of the best, I still have quite a few as standby routers and extra wireless points.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Ipad can not connect to the pc flashes on the inscription of trust ...

Ipad can not connect to the pc flashes on the inscription of trust ...

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

EA6500 can't connect to Router after Time Machine

Just got an EA6500 - updated to the latest available firmware.
I've attached 2 x WD NAS and 1 x WD via USB to the unit.
Everytime AFTER I finished running Time Machine on the MacBookPro (writing to one of the WD NAS), I can no longer login to the router neither from the local IP address nor the cisco cloud connect. The error message that I get (loosely phrased) is: can't connect to Router. Please ensure the router is connected to the internet.
At this point, all the devices connected to the router (both wired and wireless) still can access the Internet perfectly. Only the router console is no longer reachable.
Anyone else are having the issue?
Any ideas on how to resolve it?
Solved!
Go to Solution.

Contacted Cisco support and the person advised me to do a factory reset (eventhough the router is brand new with no customization!!). Regardless, it now works properly. Cisco Cloud Connect still works before, during and after a Time Machine session.
"When in doubt, try turning the electricity grid off and on"

Ipad can't connect to 3G

Seems like my ipad can't connect to 3G.. At first im connected to 3G with 2 to 4 signal bar then The reception suddenly change to Edge.. But when I put the SIM card to my other device it can connect to 3G without problem but not my ipad. I don't know what is happening, most of the time it can connect to 3G but at times it disconnected. I restart my ipad, toggle the airplane mode, on and off celullar data setting also can't solve the problem. However this only occurs at my hometown but not in the city. But again other devices connected to 3G without problem.Can anyone help me?

Hi there Eustacius!
This article can help you troubleshoot this issue with your cellular data connection a little further:
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I have a german ipad, can i connect in the us?

I have a german iPad, can I connect to the internet in the US?

That would simply activate a broadband data service to use wherever Wi-Fi is not available. But those plans cost money. Wi-Fi is free in most cases.

TS1398 My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

Try a soft reset or turn the device completely off then turn it back on again. Also you can toggle Airplane mode on for about 10 seconds and then turn it off. Sometimes that resets the radio signal inside the device.
A soft reset is basically holding onto the power button and the home button simultaneously together for about 10 seconds or until you see the screen flash and it should go completely black. Afterwards, tun the device back on like normally and see if that fixes the problem.

My iphone suddenly can't connect to itune but my ipad can still connect.

my iphone suddenly can't connect to itune but my ipad can still connect. i am using window 7 and the latest itune.

Did a diagnostic test and this is the result.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite P850
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 772513C00B220A08
Current user is an administrator.
The current local date and time is 2015-01-29 01:18:49.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is not supported. (16002)
Video Display Information
NVIDIA, NVIDIA GeForce GT 630M
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26. Device is working properly.
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D. Device is working properly.
Intel(R) USB 3.0 eXtensible Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano running firmware version 1.3.1
Serial Number: 7L******SZB
iPhone 4 (GSM) running firmware version 7.1.2
Serial Number: 68*****QA4S
iPad (3rd Generation) (Wi-Fi + Cellular) running firmware version 8.1.2
Serial Number: DYVH******GH
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

HT5622 how many mobile (phone /ipad )can i connect to same apple account?

how many mobile (phone /ipad )can i connect to same apple account?

According to this Support Article > http://support.apple.com/kb/HT4627
Your Apple ID can have up to 10 devices and computers (combined) associated with it.

Can't connect WRT54GL router to Motorola Surfboard cable modem SB6120

I can't connect my router (WRT54GL) to my new cable modem (Motorola Surfboard SB6120).
Some info:
1) Cable modem works perfectly when connected directly to computer ethernet port
2) ISP is Optimum Online
3) Using Automatic DHCP setting on router
4) Using MAC cloning on router
5) I can access the router's admin screen from the PC
6) I can connect to the router wirelessly, but no internet access
7) I've tried powering down everything multiple times, still no internet access
8) I upgraded the router firmware to 4.30.14
9) The "link" light on the cable modem never lights up when connected to the router
10) This is very frustrating
Thanks

Dabug wrote:
Hi
I've tried two ethernet cables, no luck. On the router, I get lights for Power, WLAN and the ethernet port that the pc is connected to. The "internet" light is not lit.
When the modem is connected directly to pc the link is lit up, just not when it's connected to router.
The internet light won't turn on as you need to plug something on the WAN port. And that should be the cable coming from the modem.
When you connected your pc directly to the modem, do you get internet access?

IPad can't connect to router

Similar Messages

Maybe you are looking for