IPad Can't Connect to School Network Post-iOS 4.2.1

I can't connect to wifi network on campus now that I've updated my iPad to iOS 4.2.1. The odd time when I can connect, the Internet takes forever to load a page & often it just times out making my wifi only iPad useless at school (the reason I bought the thing). Meanwhile my iPhone on 4.2.1 works on the school wifi with no problems. My iPad works on every other wireless network I've tried except for the campus one. I've even tried resetting my network settings & resetting my iPad but nothing works.
HELP!

Sorry I don't have a solution, but you should follow this link:
http://discussions.apple.com/thread.jspa?threadID=2657404
Your problem is not uncommon and eventually a solution may be found in there.

Similar Messages

Can't connect to wifi network after iOS update

Can't connect to wifi network after iOS update.

This does not work in my case.
Situation: we have wifi at home using WPA encryption.
The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
Now things stopped working again. Resetting network settings did not help either.
The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

Can't connect ad-hoc network after IOS 8.2 update

Hi,
This is my first post on Apple Discussion so please ignore grammatically and other mistakes if i made.
I am using iPhone 5S 32 GB factory unlocked and working very well in INDIAN network. I use to connect ad-hoc network created on my Window 7 Desktop via Wifi Surf-n-share Belkin USB. It is working very well and connected always until i updated IOS 8.2.
After IOS 8.2 updates, iphone couldn't connect ad-hoc network.
Is there any bug for this issue or security update.??
Help would be really appreciated.
Awaiting some good response.
Thanks in advance.

Hi abidmomin,
Thanks for contributing to the Apple Support Communities.
It appears that after updating your iPhone to iOS 8.2, you're not able to connect to your Wi-Fi network.
I recommend starting with the tips in this article to troubleshoot the situation:
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Best Regards,
Jeremy

I updated my iPad software to 7.0 and now I can't connect to my network, although I reset and restarted iPad. Network connection is fine on all other devices

I updated my iPad 2 software to 7.0.3?(the latest update), and now I can't connect to my network. I tried reset and restart and that did not work. I have no network problems with my other devices.

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

TS1398 My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.

Try a soft reset or turn the device completely off then turn it back on again. Also you can toggle Airplane mode on for about 10 seconds and then turn it off. Sometimes that resets the radio signal inside the device.
A soft reset is basically holding onto the power button and the home button simultaneously together for about 10 seconds or until you see the screen flash and it should go completely black. Afterwards, tun the device back on like normally and see if that fixes the problem.

IPad can't connect WiFi

iPad can't connect WiFi, if need to repair it?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to mu US account.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to my US account

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

With new OS6 I can't connect to wifi network with my iPhone

Ever since I upgraded to the new iOS6, my phone will no longer connect to my wifi networks. It only works on 3G. Tried to reset networks and various other things to no avail. Not happy ...

Hello,
I tried the Apple Support recommendation but nothing works, my Ipad mini still can't connect to wifi network, the wifi function in the setting menu it's not available.
I would like to send my device for technical support in USA. I'm live in Venezuela.
How can I do it?
Thank in advance

Can't connect to 3G network after upgrading to ios5.1 on iPad2.

Has anybody exprienced this after upgrading to ios5.1 on the iPad2? I can't connect to 3G network at all. It keeps giving a message of "You are not subscribed to a data network:. But I still have data left this month on my cellular contract.

Hi Miky. After upgrading to ios 5.1 I had the same problem.
I reset the APN on network settings and rewriting the same. iPad now working on 3G.
My operator is 3 ITA
iPad 1 64 GB Wi-Fi + 3G

TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Upgrading to xcode and can't connect to the network

Hi! I use a C++ library in my application which connects to the network (I suppose it uses sockets). I've been using it for months and I was using xcode 3.2.4. Now, I just had the great idea of upgrading to xcode 3.2.5, and I found out my application was crashing with the error:
If you are encountering this problem running a simulator binary within gdb, make sure you 'set start-with-shell off' first. 3.2.5
Ok, couldn't solve it, so went back to 3.2.4, as suggested somewhere. The application is not crashing anymore, but now the library can't connect anymore to the network. Tried to rebuild it (I didn't write the library but I have the sources) and use the new library, but nothing. Still the library can't connect to the network. I tried with every simulator.
Any idea what there could be wrong and how I may be able to solve this? Can I somehow delete manually everything related to xcode and the simulator and try to start all over again?
Thanks!

I've been able to temporarily solve this problem by removing the entire Development directory and installing again xcode 3.2.4. Even with xcode 3.2.4 however, the same happened, and I had to do this procedure again. Now it seems to be working correctly, but it seems something very strange has happened. Hasn't anyone experienced anything similar?
Thanks!

Can't connect to wireless network with Apple Computers (WRT54G)

Hi.
I have had a password protected router (WRT54G) for over two years that any pc will connect to if I give them the password. However, my roommate has an apple laptop and he can't connect, no matter how many times we try. I just got an ipod touch, and it can't connect to the network either. We are inputting our password correctly - why can't apple computers connect to my wireless network??
Again, my router is a WRT54G.
Thanks !!!
Message Edited by Debo24 on 05-24-2009 06:41 PM

Make sure you enter the correct password...To check your Wireless Settings follow this link
If your Wireless Security is WEP then use WEP Key1 and not the Passphrase, make sure to enter a dollar sign on your Apple Computer when you attempt to connect...If your Wireless Security is WPA/WPA2 then use the WPA Shared key and no dollar sign is required...

Windows 10 Build 9926 - Can't connect to this network in certain networks

I have been asked to ask this question here. The original thread can be found at:
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/windows-10-build-9926-cant-connect-to-this-network/e9196f95-5570-4a92-8fae-d29d7d1416b2?msgId=b2246cb5-1038-40dc-98b6-249e8734eb7f
Hello
I have a Samsung 700T tablet.
Since I got the latest update 9926 I am having issues with my corporate network access. I have to type in my user name and password on the wireless connection. When I do I get "Can't connect to this network" message.
I have tried multiple drivers for the network card a "Intel(R) Centrino(R) Advanced-N 6235". I am currently using latest.
I am able to connect fine with my home Wifi.
On the "System" event log I get the following error message when I attempt to login no the WiFi.
"A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 42"
Any ideas?
I have checked and my card is set to use DHCP.
God bless,
Bruno
--- got this answer ----
Have you tried talking to your system administrator? We had a fun bug in our Cisco wireless access points and wireless controller that would
kick Win 8+ machines from even trying to connect. A very long firmware and software update process fixed it.
--- answered back ----
Hello DatAsian,
Thank you for your response.
This is a very large wireless network, and as far that I know I am the only one having this issue. My other devices on the same cube work fine. The only difference is of course Windows 10. The other machines are Windows 8.1 and Windows 7.
In the past this was caused by a driver, but I have gotten about 6 different version of my wireless driver and they all have this issue.
I read on the troubleshoot about entering the wireless configuration manually by using the "Hidden network" screen. The instructions go:
2. Tax or click to connect to a network
3. Tap or click Hidden network tap or click Connect and then enter the network info.
I cannot find this "Hidden network" text on the "Connect to a network" screen. Am I missing something? Do I need to check something that allows me to connect to Hidden network?
One thing that I forgot to mention. I need to enter my user name and password when I enter this wireless network, since this is Employee Own device network.
Any other ideas?
God bless,
Bruno
When I use an android device I had to do the following changes to the way the device connected to wireless:
EAP Method: TTLS
Phase 2 Authentication: PAP
Then I have to use my user name and password.
Is there a way to set windows to the same type of authentication?
Please let me know.
God bless,
Bruno

Hi Alex,
I have the similar problem with Bruno, using the
certificate network.
The Event View show message of the Wired-AutoConfig as below:
Information 1:
Network authentication attempts have been resumed on this network adapter.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {************************}
Information 2:
Wired 802.1X Authentication was started.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {********************}
Connection ID: 0x2
Error:
Wired 802.1X Authentication failed.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {******************************}
Peer Address: ************
Local Address: ************
Connection ID: 0x2
Identity: -
User: -
Domain: -
Reason: 0x70006
Reason Text: The network does not support authentication and 802.1X is enforced in the profile
Error Code: 0x0
Information 3:
Network authentication attempts have been temporarily suspended on this network adapter.
Network Adapter: Intel(R) 82579LM Gigabit Network Connection
Interface GUID: {*************************}
Reason Code: The network does not support authentication and 802.1X is enforced in the profile
Length of block timer (seconds): 1200
everything find with Windows 7 and 8.1
days searching the internet but nothing makes sense.
looking forward to your help
Thanks!

Can't connect to external network

Switched from a Netgear router to a Cisco E2500 and now my Samsung blue ray won't connect to internet.
It says physical connection established but can't connect to external network.
Thank you for any help in this matter

Before I suggest you for any kind of troubleshooting steps, I would like to ask few questions. Let me know the name of the ISP. Leaving Samsung TV, do you have any computer which can access the internet wired and wireless? If yes, what IP address do you get in the computers?

IPad Can't Connect to School Network Post-iOS 4.2.1

Similar Messages

Maybe you are looking for