Ipad can't connect to TV after update 8.1.1

I have an older Ipad (3rd gen. discontinued). I used to use component cables (the 3 heads one) to connect to my older TV (no HDMI) and watch video/apps on TV with no problem. But after the recent update ios 8.1.1. A pop up will say device not support it. And with no picture,only sound on TV. Please help!! Is it the newest update that doesn't allow me to connect to my old tv anymore? What can I do? other than get a new TV?

Hi This is something, to do with Copyright, in case you try to record something The best way round this is to buy an Apple TV my Tv is 7 Years old but is works fine with Apple, TV £79.00 cheaper than a new TV Cheers Brian

Similar Messages

Can't connect to wifi after updating to iOS 6

can't connect to wifi after updating to iOS 6

really stupid... but click on the arrow to the right of your netowrk and turn off auto-join

IPad Air can not connect to internet after updating to iOS8.

Safari CAN NOT OPEN ANY PAGES because the iPad is not connected to internet. I updated to iOS8 last night and have been trying to reset my ipad as well. However, the problem is still there. It even says my Apple ID incorrect. GUYS! DO NOT UPDATE YOUR iPAD TO iOS8 UNTIL FURTHER NOTICE!!!!!!!! Luckily, I did not do anything with my phone. PHEW

Other threads I've read have had people note that the following solutions have worked for them:
If you have a 5 GHz wi-fi router, turn off 5 GHz support and let it fall back to 2.4 GHz.
Change wi-fi router to auto-select channels, or manually select a different channel than what it's on now.
Disable iCloud Drive.
I'm not saying that that any of these will work, but it's something to try (one at a time).

Outgoing mail can't connect to server after update

I updated my iphone and ipad and desktop when the new update came out. My email works only on my iphone and ipad. My computer recieves messages, but can not send them. It says it is "offline" and "can't connect to server" uggggh. This has been going on for at least a month now. I called Time Warner Cable and they basically said they could not help me.
PLEASE HELP!!!

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.

Can't connect to Internet after update

I've had this issue before but I was atleast able to get on iTunes & firefox. After this update my comp can't connect to the Internet period. I called my cable company & everything was working fine on their end. My modem communicates that it's linked my comp by a flashing light. In network prefrences my Ethernet says connected. I do not use a wireless router. I went to the Apple store & managed to get a connection smoothly. After I did the update was when my comp was unable to connect to the Internet, firefox, safari, iTunes NOTHING. I don't have any anti virus programs on my comp.
Help anyone?

Anyone???? This all happened after the 10.6.8 update...at the Apple store my Internet worked fine. Once I get this resolved I'm never updating again!

Sony Bridge Can't Connect To Internet After Updating To Mountain Lion

I've tried multiple times now, to get Sony Bridge to check for updates, but every time I try, I get the following error:
Cannot Check For Updates (no internet connection)
I'm on a 2008 iMac, connecting with a Live With Walkman.
My Mac is online and the problem only occurred after updating the OS to Mountain Lion (10.8).
Thus far I've tried going into the user library, and have deleted the two Sony folders present in the Application Support folder, but to no success, I still get the same error.
I'm firing this up regularly to see when ICS is going to drop in Belgium, so I'd be keen to hear of any possibile solutions. Thanks.

Hello OneManLaptop
ML came out 3 days ago...There is as of right now no tested version of Bridge for MAc available for it.
You will need to wait for the Update of the application but right now we can't provide a ETA for it.
Sorry for the inconvenience that this may cause you.
Francis.

Can't connect to internet after updating new Firmware wrt54g Help please!

So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

I am having the exact same problem.. I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help.. It says if you can't access the web based page then to use the TFTP utility to re-flash the router’s firmware but it seems it cannot make a connection to the router.. I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router.. I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well.. So what gives? I followed the directions but the only thing I seemed to accomplish was to brick my router.. Does anyone have a clue on how to go about fixing this problem? Any help is appreciated..

Can't Connect to WiFi After Updating To 2.2

Hey guys,
I just updated my software to 2.2, and now all of a sudden i can't connect to my wireless router at home. I can easily connect to it using my phone, but can't using my ipod. I've searched around a bit, and still can't find a solution.
When i go to settings, WiFi Networks, then i click on the blue arrow next to my router name, the only thing that is entered is my i.p address, and subnet mask. The router and DNS fields are blank. The i.p address number that was automatically entered into it is 169.254.46.155, and the subnet mask is 255.255.0.0
I have tried resetting the network settings, and turning my D-Link DI-524 Router on and off, but still no luck. In Safari i get the message "Safari cannot open the page because it is not connected to the internet" even though the wifi logo is active on the top, and it has a full strength bar of 3 bars.
Any help guys? It's really starting to **** me off. Is it a problem with 2.2 in general? My router doesn't have a WEP key by the way. I chose not to give it a password.
Cheers for the help.

Thanks for your offer to help.
I have wasted considerably more time than Mike even - let's say 24 hours spread over 4 weeks trying to get a Touch to connect to my wifi network. For the first two weeks, the Touch saw my network but refused to connect. It had a self-assigned IP 169 address. I did all the recommendations and suggestions - renewed the DHCP lease (20 times?), reset the network settings (50 times?), restored the entire Touch to factory settings (twice), entered and reentered and double double double checked the passwords and the case sensitivity and so on (more times than it is polite to tell you), and it still wouldn't connect.
Then, last week, it stopped even seeing my network. I suppose the benefit of that is that at least no-one can now advise me to renew the lease or fix the 169 IP - I can't even see the bxxxxy lease or IP setting any more! The error message is "could not find the network xxxx".
So, please do point me in the right direction - I'll be eternally grateful. I've just totally reset the Touch (again) to out of the box factory settings - and it doesn't see the network transmitted from an Apple Time Capsule one foot away from it.
The home network was totally reset yesterday afternoon, so I do know what the settings are.

I can't connect to WiFi after update

I can not connect to my router and WiFi anymore.

On your Iphone: Do the following: Settings > General > Reset > Reset Network Settings
Then log-in to your Wifi again.

Apple tv can't connect to server after update

I just updated my apple tv after being bugged constantly to do it. Usually it takes only a few minutes, but this time it took about 90 minutes. Now, even though I can connect to you tube, trailers, and the main splash screen comes up, I cannot log in or connect to the server. What is going on????

Saw some other posts which said to unplug for 30 seconds... that worked!

ITunes can't connect to server after update (window7)

After I installed itunes 12.1 on my laptop that uses windows seven, I cannot connect to the itunes store. The error it says is
"Itunes cannot connect to iTunes Store, Make sure you network connection is active and try again"
I have tried to solve it by flushing DNS settings, but the problem still persists. As for the pop up blockers, I don't really know which popblockers i need to get rid of. I got this information off of iTunes for Windows: iTunes Store connection troubleshooting - Apple Support
I ran a diagnostic and this is the error that popped up. PLEASE HELP! I HAVE TO USE ITUNES TONIGHT.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Help me please my iphone can't connect to itunes after update to iso5.0

help me please i need to update my program and song

Hy there,
In order for you to solve this problem you have to follow these stept if your running windows:
1'st step is to go into the device manager
2 step is to go to portable devices (it is rught under network adapters)
3 step is to right clic apple iphone and click update drivers
4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
After that your itunes will pump up alown and youl see your iphone right there.
Good luck and sry for my bad righting.
Andrei

TS1368 Can not connect to iTunes after updating to 10.7 on window Vista 64bit. "Uknown error - 42408"

Just updated to iTunes 10.7 on Windows Vista 64bit and now when I try to connect to the iTunes store and just get "Uknown error has occured-42408" Please help!!!!!!!

Many thanks to the other hemisphere!
SpeedBit Video Accelerator - I cannot uninstall it, so I have upgrade it. Store is accessible now!
The only but is there are again some problems with upgrading from 10.6 to 10.7, but this is another story.
Thanks again,
Martin

IPad can't connect to 3G after upgrade

I have upgraded my iPad 2 from ios6 to ios7 and now my 3G doesn't work. It seems that the APN settings aren't being retained and the network can't be recognised. Can you please advise how to fix this.

Hi, Bodnek99.
Thank you for visiting Apple Support Communities.
If you have the APN settings for your carrier, here are the best resources to adjust these settings.
iOS: About cellular data network settings (viewing or editing the APN)
http://support.apple.com/kb/HT2283
iOS: Editing APN settings using iPhone Configuration Utility
http://support.apple.com/kb/HT4839
Cheers,
Jason H.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to mu US account.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to my US account

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

Ipad can't connect to TV after update 8.1.1

Similar Messages

Maybe you are looking for