Ipad cannot connect on dock with smart case
purchased new iPad with a smart case and the dock. The iPad does not fit on the dock with the smart case on.
You must remove the case to be able to connect. Hopefully Apple will look into this as it is quite annoying to have
to remove the case.
Facetime doesn't work on an iPad 2 3G; only using wifi. You need a newer iPad.
iOS 6: Which software features does my iPhone, iPad, or iPod touch support?
http://support.apple.com/kb/HT5457
Cheers, Tom
Message was edited by: Texas Mac Man
Similar Messages
-
Will the iPad 4, 9 pin dock, fit in the iPad 3 30pin dock shape smart case?
Will the iPad 4, 9 pin dock, fit in the iPad 3 30pin dock shape smart case?
Apple themselves list the fourth-gen iPad as compatible with the Smart Case, so the answer would seem to be "yes", though I haven't tried it personally.
Regards. -
My iPad cannot connect to my internet. the internet is working but not with my ipad.
my iPad cannot connect to my internet. the internet is working but not with my ipad.
Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
Hope you get up and running ASAP -
my Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
My iPad cannot connect to the app store but my iPhone can, what do I need to do?
My new iPad cannot connect to the app store and iTunes after updates from several apps but my iPhone4s can. They were both recently updated to ios6. Whats wrong with this thing?
So you are saying that after you updated several apps - now you cannot connect to the iTunes or App Stores?
"My new iPad cannot connect to the app store and iTunes after updates from several apps"
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
Or try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
Or this ...
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right! Note : This problem persists after HDMI cable has been changed, and Apple TV was reset. My another iPad 4 64Gb also on the same most updated ISO has no problem.
I restarted the iPad, it is okay now! I think it is because I have been using the smart cover for too long, without shutting down the iPad completely! It just works fine with the airplay signal appearing again after restarting the iPad.
-
Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
When at a remote location ( not on a network) my ipad cannot connect and print to my bluetooth printer ( hp 100 wbt)
How can I connect to a blue tooth printer when NOT on a network?
Please helpiOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Can the printer also print via wifi?
If your location does’t have wifi use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
Cheers, Tom -
I can see my printer and iPad on router but iPad cannot connect to printer. Printer is on list of air printer models accepted. Help!
You may have to visit the printer manufacturer's web site and look into their support pages to get a print driver for your Mac, and install it. Or see if you can see if a driver may already be in your Mac by checking settings, since there are many drivers already installed in Mac OS X.
Good luck & happy computing! -
I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?
Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
After a system restart i cannot connect to SAP with SAPGUI.
After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno 00
sid SVI
systemid 324 (IBM iSeries with OS400)
relno 6400
patchlevel 0
patchno 147
intno 20020600
make: single threaded, ASCII, 64 bit
pid 380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c 1100]
shared lib "dw_xml.so" version 147 successfully loaded
shared lib "dw_xtc.so" version 147 successfully loaded
shared lib "dw_stl.so" version 147 successfully loaded
shared lib "dw_gui.so" version 147 successfully loaded
shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00 <
DpShMCreate: sizeof(wp_adm) 10712 (824)
DpShMCreate: sizeof(tm_adm) 3021432 (15032)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 216000 (432)
DpShMCreate: sizeof(vmc_adm) 0 (448)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c 10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00 <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00 < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c 2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c 3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c 2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 404
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 025901
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 025901
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low = 0xfffffffffffdb30
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
Unknown at 0x3618
sleepms() at 0x1000f9324
SpinLockSemRq1() at 0x1000f926c
SemRq() at 0x1000fcf6c
ThIPCInit() at 0x1000ac1a0
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
=> CPU Registers:
msr = 0x800000000000f032 iar = 0x0000000000003618
ctr = 0x0000000000003610 lr = 0x09000000000a2890
xer = 0x0000000008000000 cr = 0x000000002a404445
r00 = 0x0000000000000000 r01 = 0x0ffffffffffff3f0
r02 = 0x00000000000000a4 r03 = 0xffffffffffffffff
r04 = 0x0000000000000000 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0ffffffffffff520
r08 = 0x0000000000000001 r09 = 0x0000000010108003
r10 = 0xb00010000c90e000 r11 = 0xb00010000c90ef30
r12 = 0x0900000000001eb0 r13 = 0x0000000182784a50
r14 = 0x0000000000000002 r15 = 0x00000001810e6c48
r16 = 0x0ffffffffffffb28 r17 = 0x000000018001bf20
r18 = 0x0000000000000003 r19 = 0x0000000000000004
r20 = 0x0000000180c6de34 r21 = 0x0000000180c6de28
r22 = 0x000000018004ce60 r23 = 0x0000000180c6e244
r24 = 0x0000000000000064 r25 = 0x0000000000000158
r26 = 0x0000000000000158 r27 = 0x0000000000000000
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a005ec48 r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library |(SRV)PGM |Module |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente Tipo % CPU Funzione Stato
R3_00 QSYS SBS 0,0 DEQW
DISP_WORK SVI00 BCI 5,3 PGM-disp+work CNDW
GWRD SVI00 BCI 10,9 PGM-gwrd RUN
ICMAN SVI00 BCI 1,8 PGM-icman RUN
MSG_SERVER SVI00 BCI 0,0 PGM-MSG_SERVER SELW
RSLGCOLL SVI00 BCI 0,0 PGM-rslgcoll SELW
RSLGSEND SVI00 BCI 0,0 PGM-rslgsend SELW
SAPOSCOL SVI00 BCI 1,0 PGM-SAPOSCOL RUN
SAPSTART SVI00 BCH 0,0 PGM-sapstart EVTW
WATCHDOG SVI00 BCI 0,4 PGM-disp+work SELW
WP00 SVI00 BCI 1,0 PGM-disp+work RUN
WP01 SVI00 BCI 1,0 PGM-disp+work RUN
WP02 SVI00 BCI 1,0 PGM-disp+work RUN
WP03 SVI00 BCI 1,1 PGM-disp+work RUN
WP04 SVI00 BCI 0,9 PGM-disp+work RUN
WP05 SVI00 BCI 0,9 PGM-disp+work RUN
WP06 SVI00 BCI 0,8 PGM-disp+work RUN
WP07 SVI00 BCI 0,6 PGM-disp+work RUN
WP08 SVI00 BCI 0,0 RUN
ACTIVE JOBS OF WORKING SYSTEM
R3_03 QSYS SBS 0,0 DEQW
DISP_WORK TST03 BCI 0,0 PGM-disp+work SELW
GWRD TST03 BCI 0,0 PGM-gwrd SELW
ICMAN TST03 BCI 0,0 PGM-icman SELW
IGS400 TST03 BCI 0,0 PGM-igswd_mt THDW
IGS400 TST03 BCI 0,0 PGM-igsmux_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
MSG_SERVER TST03 BCI 0,0 PGM-MSG_SERVER SELW
RSLGSEND TST03 BCI 0,0 PGM-rslgsend THDW
SAPSTART TST03 BCH 0,0 PGM-sapstart EVTW
WATCHDOG TST03 BCI 0,0 PGM-disp+work SELW
WP00 TST03 BCI 0,0 PGM-disp+work SEMW
WP01 TST03 BCI 0,0 PGM-disp+work SEMW
WP02 TST03 BCI 2,5 PGM-disp+work RUN
WP03 TST03 BCI 0,0 PGM-disp+work SEMW
WP04 TST03 BCI 0,0 PGM-disp+work SEMW
WP05 TST03 BCI 0,0 PGM-disp+work SEMW
WP06 TST03 BCI 0,0 PGM-disp+work SEMW
WP07 TST03 BCI 0,0 PGM-disp+work SEMW
WP08 TST03 BCI 0,0 PGM-disp+work SEMW
WP09 TST03 BCI 0,0 PGM-disp+work SEMW
WP10 TST03 BCI 0,0 PGM-disp+work SEMW
WP11 TST03 BCI 0,0 PGM-disp+work SEMW
WP12 TST03 BCI 0,0 PGM-disp+work SEMWFollowing your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 317
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 028178
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 028178
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL started with length 64000000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP started with length 16776192 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF started with length 40960k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA started with length 16383k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function 5
C Package DDNTFIH Library R3SVIA2062
C Main_Pgm Main_Lib
C Statement_Name "Wx3AAADpDB" Cursor_Name "CADDNTF16461"
C Open_Options x80 Clause_For_Describe N
C Commitment_Control C
C Date_Format USA Date_Separator /
C Time_Format USA Time_Separator :
C Naming_Option SYS Decimal_Point .
C Blocking_Factor 1 Scrollable_Option 0
C Position_Option 0 Relative_Record 0
C Rows_To_Insert 0 Direct_Map N
C Reuse_DA N Name_Check Y
C Use_Ptrs 0 With_Hold N
C Close_File_Name Close_Library_Name *THRESHOLD
C Reopen 0 Use_Perf 1
C Query_Compl. (Reval) ! Statement_Text_CCSID 819
C Sort_Sequence_Table *JOB Sort_Sequence_Library *LIBL
C Language_ID *JOB Allow_Copy_Data S
C Allow_Blocking L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c 93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low = 0xfffffffffffd6f0
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
AixStack() at 0x10008d040
CTrcStack2() at 0x10008d138
ThControl() at 0x1006551a4
dyThControl() at 0x1003ab070
dextIntern() at 0x1003aa06c
sap_dext() at 0x1003aff24
dbeh_exit() at 0x100416924
db_ntab() at 0x10039d48c
read_ntab() at 0x101512474
db_cbufload() at 0x10150f40c
reset_handling() at 0x101512f00
init_shm_and_load_cals() at 0x10151394c
db_cbufinst() at 0x101514c48
db_calinit() at 0x1005ae8bc
db_init() at 0x1001c7ae0
ThCallHooks() at 0x1000c3654
ThIPCInit() at 0x1000ac574
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library |(SRV)PGM |Module |Function/Statement No.
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c 355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c 9564]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ? -
Cannot connect to Host with user name J2EE_ADMIN !!!
Hi all,
this exception when deploy from NWDS04s:
<i><b>Caught exception while checking the login credentials for SAP J2EE Engine. Cannot connect to Host with user name J2EE_ADMIN</b></i>
Complete exception:
<i>Result
=> deployment aborted : file:/D:/DOCUME1/VITO1.PAL/LOCALS~1/Temp/temp23237GivaudanNavigation.ear
Aborted: development component 'GivaudanNavigation'/'local'/'LOKAL'/'0.2006.03.20.16.50.48':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [milds2004] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted</i>
Any help will be appreciate. Thx.
VitoHi Nagarajan,
it seems not good
D:\usr\sap\GVD\DVEBMGS01\SDM\program>sdm changepassword "sdmhome=D:\usr\sap\GVD\
DVEBMGS01\SDM\program" "newpassword=ADMIN1"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_java_home=D:/j2sdk1.4.2_09
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_64bit_switch=
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_heap_size=128
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_memory_switch=-Xmx128M
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_com="D:/j2sdk1.4.2_09\bin\java" -X
mx128M -jar "D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>"D:/j2sdk1.4.2_09\bin\java" -Xmx128M -jar
"D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar" changepassword "sdmhome=D:\u
sr\sap\GVD\DVEBMGS01\SDM\program" "sdmhome=D:\usr\sap\GVD\DVEBMGS01\SDM\program"
"newpassword=ADMIN1"
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0005.20051006181702.0000
Initializing Network Manager (50117)
Checking if another SDM is running on port 50118
SDM is integrated in JStartupFramework. No repository changing commands are poss
ible.
Processing error. Return code: 4
Could U help, pls? Thx
Vito -
Cannot connect Service Manager with Orchestrator Web Service URL
Dear TechNet User,
i cannot connect my service manager console with my Orchestrator Webservice. i try to connect to "http://AMSCO01:81/Orchestrator.svc" ... the user i´ve choose is local admin on the orchestrator Machine.
Thats the Logfile:
Date: 07.10.2013 15:23:16
Application: System Center Service Manager
Application Version: 7.5.2905.0
Severity: Error
Message: Could not connect to the Orchestrator web service.
System.Data.Services.Client.DataServiceQueryException: An error occurred while processing this request. ---> System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}
fieldset{padding:0 15px 10px 15px;}
h1{font-size:2.4em;margin:0;color:#FFF;}
h2{font-size:1.7em;margin:0;color:#CC0000;}
h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
#header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;
background-color:#555555;}
#content{margin:0 0 0 2%;;}
.content-container{background:#FFF;width:96%;margin-top:8px;padding:10px;;}
-->
</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
at System.Data.Services.Client.QueryResult.Execute()
at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
--- End of inner exception stack trace ---
at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
at System.Data.Services.Client.DataServiceQuery`1.Execute()
at System.Data.Services.Client.DataServiceQuery`1.GetEnumerator()
at Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.OrchestratorRunbookConnector.GetRunbookFolders(OrchestratorContext scoContext, Folder parentFolder)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.Connectors.Orchestrator.OrchestratorConnectorHelper.ValidateServerConnection(Boolean found)
System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}
fieldset{padding:0 15px 10px 15px;}
h1{font-size:2.4em;margin:0;color:#FFF;}
h2{font-size:1.7em;margin:0;color:#CC0000;}
h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
#header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;
background-color:#555555;}
#content{margin:0 0 0 2%;;}
.content-container{background:#FFF;width:96%;margin-top:8px;padding:10px;;}
-->
</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
at System.Data.Services.Client.QueryResult.Execute()
at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
any ideas? Thank you very much!Hi,
I am unable to connect to
http://hostname:81/Orchestrator2012/Orchestrator.svc/ in IE and am getting the same error while creating the connector.
I can connect to orchestrator via http://hostname:81/ but it still gives me the same error when I create the connector (Cannot connect Service Manager with Orchestrator Web Service).
anyone seen it before? -
Apple iPad Camera Connection Kit - Compatible With iPhone?
Does the Apple iPad Camera Connection Kit work with the iPhone 4S (running iOS 5.0)? I'd like to connect a Korg USB-MIDI controller keyboard to my iPhone, to use with GarageBand for iPhone
This accessory is compatible with the following:
iPad
iPad 2
http://store.apple.com/us/product/MC531ZM/A -
Does the IPad camera connection kit work with the Ipad 4 and /or is the an adapter ?
You want the newer Lightning to USB Camera Adaptor.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
The old Camera Connection Kit also works and I use it on my iPad 4, however, to use this your will need the Lightning to 30 pin adaptor.
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m
Maybe you are looking for
-
24" iMac will only boot in safe mode
Here is the short version: I have a 24" iMac Core 2 2.16 GHZ with Lion installed (has been for a long time). It will only boot successfully in safe mode. The AHT Extended tests do not report any problems. I have reset PRAM and SMC. Nothing helps.
-
BPM, Solution Manager, XI and Workflow
Hello all, I read that in XI/P, BPM uses the Workflow engine. I also heard about the BPM in Solution Manager. What is the difference between BPM in Solution Manager and BPM in Workflow? Do both systems use the old Workflow engine? TIA
-
How do I completely disable TB's attempts to tag/flag/judge email as junk?
I don't want TB to touch my emails with ANY junk classification. I don't want it to display 'junk' icons. I don't want it to 'think' a message is junk mail. How do I permanently, completely and irreversibly disable any and all code in thunderbird tha
-
Error : LDAP Error code 32 - in shared services export operation
Hi everyone ! I m using MS Active Directory in my Shared services for external authentication. while exporting provisioning for all users against project:applications , it is not working Trace error is : 2010-05-26 16:43:58,988 Export : Root cause :
-
Number of elements in TDMS file
Is there a way to determine the number of elements in a TDMS file? The files I am creating have several signals all of the same length. The only way I can think of is to do this is put it in a loop and read one element at a time until it reaches th