IPad case recommendation for UK

Hi,
I am looking for an iPad case for a xmas pressie and was looking at a dodo, portenzo style etc, but was wondering if anybody has anything similar in the UK? The shipping costs are so high to get these from the states.
I did a bit of research and found one that looks very similar    www.patsoncase.com
Has anybody got one of these or heard anything about them? I can't find much on the Internet but they seem to sell on Etsy too and have good feedback. Works out quite a bit cheaper when you take shipping into account, but want to make the right decision!
Thanks for your help

If you find anything suitable and post your findings that'd be great. I am pretty much at a dead end now
I have just had a helpful chat with a rep from Squirrel Sollutions:
me: We're looking for a POS till system that uses android tablets as the till interface, can you provide the hardware for this? Minus the actual tablet,
Just a moment...
Aaron: yes, thats how it works
me: great, at the moment we have been led to other providers that can supply, till drawers, printers etc for till systems that use tablets as the workhorse.
Aaron: if you like i can forward your info to our local reseller in the UK
me: specifically we're opening a bar and would need three tills (so three iPads or Androids) and the accompanying hardware.
that'd be great!
we already have the tablets,
Aaron: ok we would be glad to provide a quotation and a demo if necessary
what is your contact info?
me: well we're based in the UK and are in the planning/construction stage of the venture. Do you have a brochure etc?
details of the british reseller would be great!
Aaron: yes i do, i can email to you right away
me: brilliant, the email address is at the top of this box, but its phillip.shaw@*****.com
Aaron: the reseller will contact you as soon as possible. what is your name?
me: Phil
in the meantime could you email me a brochure across?
Aaron: ok Phil, i will send the brochure right away
me: great stuff! Thanks a lot.
Thanks for your help!
When the info comes through i'll update the thread here. Just to clarify they offer iPad solutions not just Android.
Message was edited by: Phillshaw

Similar Messages

  • IPad Case Recommendations

    Hi all,
    I'm looking for an iPad case that will alow me to prop up the iPad for use in the kitchen, family room, etc. I don't intend to transport it outside, so hardcase options like the Otterbox aren't necessary. I also read several somewhat negative reviews about Apple's iPad case, so I'd appreciate hearing from anyone who can recommend some decent options. Thanks, Don

    Personally, I think the iPad case is ugly. My problem is with the exterior finish. It's like a suede finish and, as such, really shows blemishes, smudge marks, etc. I bought my iPad about a month ago and took a close look at the Apple case - owned by several friends - before deciding to go looking elsewhere.
    After looking at dozens I settled on the Cyber Acoustics IC-1000BK. It's very nice looking, made of black leather with a smooth, matte exterior finish that does not show smudges and cleans easily (they also have the same case in red leather).
    I like the way it holds the iPad very securely with soft plastic tabs at the four corners and then leaves the rest of the edges and all controls accessible. It has two small elastic straps at corners that can be used to keep the case securely closed - a feature I rarely use, but something you may want to employ during periods when the iPad is not being used. It also has an internal, wide elastic strap to put your hand through while holding the iPad in portrait mode - another feature I don't choose to use.
    I found this for sale at a number of internet sites, but ended up buying directly from Cyber Acoustics. Since they ship for free, their price + shipping was as good as any.
    In the interest of full disclosure: I have absolutely no personal or business connection with anyone at Cyber Acoustics.

  • Flip case recommendations for 5S?

    Hi all,
    We are in the process of getting a couple of iPhone 5s' and am looking for some recommendations for flip style cases. Any favorites out there?
    Thanks,
    Ed

    I have both iphones and the biggest problem I had with the older one and now the new one is the cases. There are too many bulky cases that defeat the purpose of having a smart phone. The best hard case I found after buying seven of them is the Agent18 Shield. I have had it for all my ipods and have yet to get a scratch on my phone or ipod when dropped. The best part is it does not fall apart when you do drop it like many other bulky cases. The bad part about the Agent18 Shield is that there is no clip or holster for it to snap into it. You will have to carry it in your pocket. It is pretty slim though and less bulkier.

  • Case Recommendations for iPad 2

    I just received my iPad 2, and I'm trying to decide which case to get that will work along with the Smart Cover. I'm trying to decide between these cases:
    1. X Gear Smart Cover Enhancer
    2. AviiQ Smart Case
    3. Enki Genius Case
    Is anyone using any of these cases? All suggestions, recommendations and advice would be much appreciated! Thanks!

    I did A TON of reasearch and I've narrowed down this choice to two options that work perfectly for home, travel and professional use.  I rotate between the two. 
    (1) Smart Cover Set Up:  II love my smart cover, but I only had to see a friend drop his iPad once to know the back needed protection.  I didn't want to loose the slim esthetics of the device, so this thin, clear back cover has been perfect.  I've had at least 5 friends buy the same one.
    http://www.amazon.com/gp/product/B004R7A9NU/ref=s9_simh_gw_p147_d0_g147_i1?pf_rd _m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=19KPN33XRQBWBZ9HCQPP&pf_rd_t=101&pf_rd _p=470938631&pf_rd_i=507846
    (2) CrownCase Black Leather:  It is really faux leather, but it works for me.  It is the highest rated case on Amazon and it's as good as advertised.  This case fits perfectly, allows access to all controls, and doesn't impete the speaker.  Love it!
    http://www.amazon.com/Smart-Cover-Partner-Slim-Fit-Apple/dp/B004XIT4NO/ref=sr_1_ 1?s=electronics&ie=UTF8&qid=1325547501&sr=1-1

  • Case recommendations for Mbp 13"?

    I am loving my new MBP 13" and I am totally lost on what type of case to protect it to buy! I have read pros and cons about the hard icase as well as the satin case! I really want something that isn't as bulky but I don't want my mBp to get damaged either! Do these cases really protect it or is it more of a fashion statement? What is the actual necessity of having one?
    Tiffany

    I have a Speck Hardshell case (in clear). In my opinion, it adds no bulk and minimal weight (by like, maybe a few ounces). It's protected my computer from scratches, and I love it. It's a nice way to keep the unibody pristine while still showing off the aluminum or having a different color (I almost went with blue). I also have the Paul Frank monkey 13 inch sleeve for my MBP. With the Speck case on, it still fits in the sleeve perfectly and it's great for traveling and extra protection in my bookbag from spills, dirt, etc.
    Edit: I also have the Moxi palmguard/trackpad cover to prevent it from getting dirty/worn down. It works wonderful and, despite the reviews, the trackpad still responds the same with the tap-click/regular click/gestures with no extra effort for me. I recommend getting the iKlear cleaning solution to clean your MPB as well for regular use as well as putting on the case (trapped dirt can scratch the MPB), and the iKlear works wonders cleaning the body, screen, and other electronics.
    Message was edited by: PoetrySings

  • Case Recommendations For 30G Video Ipod

    I will b e getting the above Ipod within a couple of weeks. Should I just get a v-sheild or just a case or both. Also, could you recommend a case. Thanks so much.

    I really like the hard plastic, transparent case
    SeeThru Hard Case for iPod Video 30GB, 3 Pack
    Manufacturer: Speck Products
    Mfg Part #: IV30-3PK-SEE
    Available from CompUSA and a bunch of others. $30 for a three pack in three colors (clear, smoke grey, and red).
    Easy on the pocket, can see video through screen, prevents scratches, etc. One trick, though. A standard 1/8" mini stereo plug won't fit through the case. Shave a little off your soft plastic mini-plugs with a craft knife and it works like a charm.
    RobMason2027

  • Need leather case recommendation for 1st gen Nano

    Hi all,
    I am looking for a recommendation of a leather flip type case for my Nano. I have one for my 5G iPod but am having difficulty locating one for the Nano.
    Thanks for any info.
    Ed

    Hi,
    Try Target. I just bought an incase wallet type case for my nano and one for my mom's video. Both were clearanced 1/2 price. Nothing fancy, but nice.

  • Case recommendations for iPHONE

    Is there a thread with suggestions for best cases? if not, what are you iPhoners loving?

    I have both iphones and the biggest problem I had with the older one and now the new one is the cases. There are too many bulky cases that defeat the purpose of having a smart phone. The best hard case I found after buying seven of them is the Agent18 Shield. I have had it for all my ipods and have yet to get a scratch on my phone or ipod when dropped. The best part is it does not fall apart when you do drop it like many other bulky cases. The bad part about the Agent18 Shield is that there is no clip or holster for it to snap into it. You will have to carry it in your pocket. It is pretty slim though and less bulkier.

  • Case Recommendation for K7N2 Delta-ILSR

    Greetings,
    I'm looking for a mid size ATX case that that has the front usb etc. ports prewired as to work easily with a K7N2 Delta-ILSR mb.  By that I mean I don't have to plug each wire individually (with names that don't match) just a plug that goes on the mb.  My eyesight isn't as sharp so hooking up those one wire at a time is tediuous.  Not to mention the lack of starndards   Does anyone know if this is address on the next rev of mb's (with pcix etc).
    Thanks

    Brazos,
    I have yet to see a case that has all the USB wires together, they are all 1 pin at a time. You will find the Antec line of cases very good. (You can always use a magnifying glass to see the pins.) The pin names on the Antec cases are standardized and easy to figure out.
    If you want a good case at a cheap price, then go with the SLK3700AMB:
    If you want a good high end case, then go with the Sonata:
    If weight is an issue, then go with the Super Lanboy:
    Take Care,
    Richard

  • Recommendations for waterproof ipad case?

    I'm looking for a waterproof case to take my iPad to the beach.  I've seen some but reviews are sketchy.  Would love some feedback/recommendations. Thanks!

    I have to agree with PogoPossum about readability but if you are under an umbrella, it ain't so bad. I suggest that you search the web for waterproof iPad case, there are a few good enclosures available that are not plastic bags, I own a company that sells a cost effective one but we are not allowed to post advertisement here...
    Regards
    Daniel from DNdistribution2011

  • Looking for a case recommendation - special requirements

    I just moved up to an i4 from an i3G, and I'm looking for a decent case to protect the entire phone. I really need something for a rugged environment, and it has to have a belt clip. I have a very active job so this isn't going to be a pocket phone or sitting in the center console of a Rolls Royce. I have a Speck Tough Case on my 3G, and besides the extreme shock protection, it completely covers everything on the face except for the display. Spec makes a "Tough Skin" for the i4 but it doesn't cover the upper area of the faceplate like their Tough Case did for the 3G.
    Any recommendations?

    You should take a look at Fatpaint (http://fatpaint.com) - Free online graphic design and photo editing application, specialised in giving you the tools you need for creating designs and illustrations for iphone cases, ipad cases. The bcase brand is Speck, and is of great quality.
    It is possible to paint, draw make pages and see your pictures on products and buy them, such as: iPhone case, iPad cases, t-shirts, sneakers and much more. Checkout the tutorial videos, it is quite interesting ...
    http://youtu.be/YkBnf5NGC8Y?hd=1
    http://youtu.be/mnP495V9WHw?hd=1
    http://youtu.be/GNctuQ5T858?hd=1
    Fatpaint's facebook page:
    http://www.facebook.com/fatpaint
    What you guys think of it? I have spent 5 years developing this app. I would appreciate any feedback.
    Thanks

  • Best iPad case for hospital/ER use?

    Hi all,
    I'm an ER doc and our department just received new iPads as we move into the electronic medical records age.
    I need a strong yet practical (lightweight) iPad case.
    We will carry it from patient room to room and use it for documenting histories and charts.
    I've read other threads about practical sanitation of iPads but that's not that big of deal since I'd rather just take it out of the case to clean it or just wipe the whole thing in its entirety with our sanitation wipes.
    I'm mainly looking for something that can protect against drops, spills/blood/fluids but not weigh like a brick.
    Our documentation program is also compatible with a stylus.
    Are the hard screen protectors on most cases OK for stylus use in terms of accuracy and details?
    Any input and reviews would be greatly appreciated.
    Thanks!

    GummyD and other docs,
    My company Alphyn Industries just developed a scrub that holds your iPad for you on your chest with our LEDGE system. It frees both your hands and the iPad is suspended perpendicular to your chest when needed.
    To put the iPad away, the pocket flap is simply zipped up. We have not launched is commercially yet, and we are looking for doctors who want to work with us and help us make it mainstream.
    We aree also working on a disposable film pack to keep the screen sanitary in the OR.
    You can see the LEDGE application in our commercial PADX-1 fleece jacket:
    http://alphynind.com/store/index.php?route=product/product&path=26&product_id=57
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    Please contact me for more details.
    <Edited by Host>

  • I want to add a solar charger for iPhone 5 and iPad to my emergency kit. Are there recommendations for compatible solar products?

    I want to add a solar charger for iPhone 5 and iPad to my emergency kit. Are there recommendations for compatible solar products?

    If you are seldom in a Wi-Fi Network Area, then you can turn off Wi-Fi until you knowingly are in such a Network Area.  You can go through your Applications where you don't really need to know the instant an Update is available and turn off the push update notifications.  You can turn down the screen brightness.  You can set the sleep cycle to 1-min.  You could set your email to check for new messages every 30-min. rather than less than 1 min.  Just some of many steps available.

  • Recommendations for creating dvd case inserts?

    Hello! As far as I can tell, iDVD 6 has no feature for creating dvd case covers/inserts.
    I'd appreciate recommendations for inexpensive or free software for making such covers.
    Thanks!
    David

    You're welcome, David. I'm not familiar with all the Sharpie product line, but the common one that marks anywhere uses a fairly harsh solvent, and in theory could eat through to the reflective coating of the DVD. I found a Memorex product at Fry's Electronics named, "CD Marker." It is labeled non-toxic, water-based.
    Personally, I've not had any problems with the sticky labels (I've used Memorex and CD Stomper labels for a few years) but there are some strong feelings opposed to their use (and I can imagine a problem could come up in 10-15 years). You can do a search in these forums; an alternative is printing directly onto the DVD if you have the right printer and disks.
    John

  • Recommendations for Folio/Wallet Case for Lumia 15...

    Good day ..
    I am looking for some recommendations for a thin Folio / Wallet Case for my Lumia 1520. I specifically want to know if the buttons are easily accessible and if the case is durable as in not "flimsy".
    Thanks a bunch.
    --- Val

    Hi, vpalhories.
    Have you tried going to any nearest Nokia retailer in your area and check if they have available Folio/Wallet case for it? BTW, you can also check our Nokia website for all of the accessories that are compatible with your phone. See this: http://nokia.ly/1xlR7Rb. Perhaps, you'll be interested with the Protective Cover CP-263. It is not the same with what you're looking for but it will protect the phone.
    Enjoy the rest of your day!

Maybe you are looking for

  • Stuttering image pan

    Hello, I have seen and looked over several different threads on this subject, but I have not yet found a solution that works for me, so I thought I would try myself. I have created a simple image pan for a project I am editing for somebody. I have tr

  • How can I change the settings so notes don't sync to my email?

    I don't like how notes always syncs to my email, because it's pretty much send my diary out, even it there's not much stuff there. How do I change the settings so they don't sync? Thanks. It might seem like an obvious question, but I can't find the p

  • VIEW AND INDIRECT PRIVILEGES BY ROLE

    Good Evening, Is there a way to avoid error message "ORA-00942 table or view does not exist" during the creation of a view on another user's table with the SELECT ANY TABLE system privilege granted through a role ? Reading ORACLE's books it seem impo

  • How to replace an email website address.

    My email account is being deactivated so I don't want it listed in Thurderbird. How do I remove it (the listing) and replace it with a new account? All email has been forwarded to the new account--basically the old account is dormant.

  • T1 Vs T2 LSU

    The T2 architecture has the following working: The dcache is write-through, so the LSU sends all stores to the L2. The L2 maintains a copy of the L1 tags for coherency. Hit or miss in the L1 for stores is determined by the L2. Stores which hit the L1