Ipad configured and wont start..

Ipad configured and worked for a while and then out of the sudden it won’t start again no matter what I do plugged to PC in power
Please advice?
NB

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start

Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
now my ipod is in dead case, it just gives apple logo and wont start.
Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
Method 4: netsh xyz (comand) in cmd...
Please Help thank you.
"Details:
ipod touch 4g
ios 6.1 installed (lastly)
jail broken but deleted cydia from it
then tried to restore it always gave Error 3194,
then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
my itunes on dignostic gives this report,
Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP xw4400 Workstation
iTunes 11.1.1.11
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 001AB71808E6CBD8
Current user is not an administrator.
The current local date and time is 2013-11-29 04:19:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 8400
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.1.11 is currently running.
iTunesHelper 11.1.1.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {BC8F9388-D244-4F12-92A3-A26318EE6C52}
Description:    Broadcom NetXtreme Gigabit Ethernet
IP Address:    192.168.1.102
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:    Yes
DHCP Server:    192.168.1.1
Lease Obtained:    Fri Nov 29 04:16:55 2013
Lease Expires:    Fri Nov 29 06:16:55 2013
DNS Servers:    192.168.1.1
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-29 04:18:45.

lllaass thank u bro, but none worked for me
i have tried all these methods n above which i mentioned before....
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u...

How to Install, Configure and getting started with Hyperion Web Analyzer9

i have installed both
Hyperion Reporting and Analysis - System 9 Services Release 9.3.1 Microsoft Windows x86 Installer.
Hyperion Reporting and Analysis - System 9 UI Services Release 9.3.1 Microsoft Windows x86 Installer
Now tell me step by step on how to configure and how start Web analyzer
I dont know how to start server/services. (Any Web server required?)
Getting started would be more helpful.
Need help ASAP.
thanks,
Ram

Hi,
First of all have you installed Shared Services as you will need that as that foundation of the installation.
You will also need to install other components such as essbase if you intend to use it with web analysis.
If you have done that, then you will first need a repository to hold Reporting and Analysis information.
Afte start up the configuration utility and select the Reporting & analysis elements and go through the steps entering
details such as shared services connection, repository information.
It should install the components as a service.
You should really read the installation document :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
Cheers
John
http://john-goodwin.blogspot.com/

My ipod is displying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesnt "see" it even if the computer does.

"My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
Can I factory reset it somehow? (considering itunes can't "see" it)
[Ipod classic 160gb less than two years old.]

Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure.

Windows defender is stuck and wont start- H50-50

windows defender w.app is stuck and wont start, definitions are out of date but
update failed several times, I've tried to reactivate Windows Defender. to no avail:
" Windows Defender is Microsoft’s homegrown antivirus solution, which is enabled by default in Windows 8. (Unless your PC vendor disabled it to activate a bundled AV solution by Norton, McAfee and their ilk, that is—as Lenovo often does." I looked on MS downloads and there isnt any defender
there isnt any also on my pc programs
I have java 32bits version 8 update 45- lenovo H50-50
thanks

Try Windows Defender support for help with that issue: <br />
http://www.microsoft.com/windows/products/winfamily/defender/support.mspx

Iphone stuck with apple symbol and wont start up

i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do

Hi,
Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
**** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
THANKS

SMICM indicates J2EE status as not configured and not started

I am running WAS6.40 with J2EE add-in. Until recently the J2EE was working fine. Was able to access it using http://<hostname>:50000/ but recently it stopped working. There is nothing obvious in the logs & traces. SMICM indicates J2EE status as not configured and not started. Where else can I look for? How do I increase trace level?

Can you be more specific? Which logs and traces did you look at?
The default trace, dispatcher/server logs should indicate what happened (and they should also be written to during a restart)....
Also check the std* files in your work directory...

HT1349 should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

I am bemused and have to ask how one "readjusts" a battery?

HT4623 try to update and went black and wont start up again

try to update my phone now black and wont start up

Same thing happened to me. I took it to the Apple store and they told me they would be happy to replace the phone for me for $149.
<Edited by Host>

My iphone 3gs is off and wont start up.

My iphone 3gs is off and wont start up. And when plugg it into the charger it starts up for a minute and shut down. but whithout charger dosnt do anything. Cant restore and it is not a battery problem.

Sure sounds like faulty battery.
Open iTunes on computer, connect iPhone to computer, hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.

Ipad has apple logo and wont start, ipad has apple logo and wont start

i did the latest sotware update and my ipad has only the apple logo and wont start

Try force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Can't get iMessage, totally deleted everything on iPad mini and then started from scratch but still can't get iMessage

On iPad mini, and year ago my iMessage stopped working ! Took it to the store n they reset everything on it! Still couldn't get iMessage to work.
Just decided to leave it because thought I can deal with email n Skype.... Now I need iMessage so just deleted everything n re booted iPad!. Reset everything. Still can't get iMessage and iCloud!!! I'm not too bad cuz I can sync with hubby's iMac. But know I won't have iMessage.

Hello ruby10t,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Messages issues:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is toupdate your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Re: I accidently turned off my imessages and now they keep messing up and wont send imessages

HELP MY MAC IS BROKE AND WONT START (unable to find driver ACPI)

Someone please help. I was reinstalling a printer driver and my power cut off while it was installing. now the computer wont start and i get this message below... I read to use the install dvd but my CD drive is broke and wont take cds. I did manage to hook it up to my dads computer with target disk mode so i can access files. his computer is a windows though. i do have a copy of the Leopard install cd saved as a DMG on his computer and a 8gb flash to boot it but i cant format the flash drive to be mac extended journaled GUID from his computer.IS there a program to do this???I dont know what needs to be fixed or where i can get this acpi driver? can anyone help because i dont have any money to get this fix and i need my mac for college which im starting soon.
This is the error message
panic(cpu 0 caller 0x004384FF): "unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1228.12.14/iokit/Kernel/IOPlatformExpert.cpp: 1407
(That is the first line. It goes on to say...)
Debugger called: <panic>
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
(then there are 7 lines that start with 0x2f5d3 followed by)
Backtrace terminated-invalid frame pointer 0
BSD process name corresponding to current thread: Unknown
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
System uptime in nanoseconds: 180744654
It also says 64bit mode enabled and i thought macs were 32bit.
I also tried resetting the pvram or whatever its called and no luck
Someone please help!!!!

I know this isn't what you really want to hear but I'd recommend taking it in to an authorized repair location or your local Apple Store to get the Superdrive repaired or replaced so you can do an install? I don't believe you will be able load from your Dad's Window's machine. However you might be able to from an external DVD drive.
Also I might recommend getting a UPS so if you have similar issues you will have enough power to do a proper shutdown.
Regards,
Roger

Macbook Pro starts, chimes, goes black and then restarts - continues like this and wont start

I have been meaning to change my battery on my computer as it is completely dead and wont charge when plugged in. So this might be a problem but it is plugged into the adapter and it has been working fine the last few weeks, but all of a sudden this problem occured:
I accidentally unplugged my computer before shutting it down and it switched off automatically. When I tried to turn it on it would start, the chime sound could be heard a grey screen with the apple would appear for a couple of seconds and then the screen would go black and the computer would try to reboot again and the chime would sound and then go black and restart again, chime would play etc. It continues like this and wont do anything else. I can open the computer in safemode without a problem. Is this just a battery problem (even though it is plugged into the charger)? or do I have a hardware problem.
Also if I try to restart the SMC will this delete everything on my harddrive? I havent backed up everything and I dont have the means to back up (using safemode) at the moment. \Please help if you can. I am in a desperate situation at the moment.

Given that it runs in Safe Mode, a reinstall may be overkill. But what the heck! A nuclear bomb CAN be successfully used to kill a mosquito...
Recovery Mode == Command R
Safe Mode == Shift

Ipad charged but wont start

i tried holding the home button and the start button, but apple icon did not appear

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Ipad configured and wont start..

Similar Messages

Maybe you are looking for