Ipad connect to airport express

I am new user and i have ipad 1 , new macbook air, pc with windows 7 home edition, pc with XP SP3 and new airport express. Mac and airport work ok ( airport join an existing wireless network in client mode), PCs work also ok, but Mac can not see Ipad and PCs,, and PCs cn not see MAC. Ipad only see airport speakers in Itune. I need to my MAC see PCs and Ipaf.
Could you help me?

( airport join an existing wireless network in client mode)
With the 802.11n AirPort Express Base Station (AXn) configured to join an existing wireless network, it is not broadcasting a wireless network. Any issues with network client unable to "see" other clients would either be with the wireless router providing the wireless network OR that each network clients has NOT been properly configured for file sharing.
Please check out the following Apple Support articles for help with setting up File Sharing:
Mac 101: File sharing
Mac OS X: Sharing your files with non-Apple computers
... and this excellent article from iFelix

Similar Messages

  • Ipad connects with Airport Express, but not wireless router

    I have a airport express that exends my network and is connected by an ethernet cable to the wireless router.  they are on opposite sides of the house from each other.  every other device i own has full bars wifi anywhere in the house.  but the ipad only seems to find the signal from the AE. 
    If i go in the bedroom with the wireless router, the signal drops to 1 bar.  if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it.  i have tried reset, hard reset, renew lease forgetting network, and all fails.  any ideas?
    I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

    Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
    The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
    AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
    Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

  • MacBook Pro not connecting to Airport Express, iPad connects fine

    Hi. Suddenly my Macbook Pro cannot connected to our wifi connection via Airport Express, though the connection is visible in the Airport drop-down and it shows full signal strength. My iPad connects fine.

    qamera wrote:
    my Macbook Pro cannot connect to our wifi connection via Airport Express, though the connection is visible in the Airport drop-down and it shows full signal strength.
    You might try resetting your connection settings using the steps listed in this message:
    http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
    They're not guaranteed to solve the problem, but they'll only take you a minute or so to try.

  • Bonjours je viens d'acheter un ipad 2 et je voulait savoir si je peux connecter  la  AirPort Express sur un disque dur externe pour avoir plus de capacité de memoir sur mon ipad et merci d'avance

    bonjours je viens d'acheter un ipad 2 et je voulait savoir si je peux connecter  la  AirPort Express sur un disque dur externe pour avoir plus de capacité de memoir sur mon ipad et merci d'avance

    Bonjour
    Exactement le même problème et sur beaucoup de forum beaucoup de gens en discute
    J'ai même essayer des version beta de nouveaux firmware fournis par D-Link mais rien y fait !

  • Can i set the ipad to print to an Hp all in one that is connected to Airport express

    Can i set the Ipad to print to an HP All-in-one Printer that is connected to airport express?

    Hey Eugene!
    Here is the website about AirPrint, if you scroll down it will say in details if your model is compatible with AirPrint.
    http://www.apple.com/ipad/features/airprint.html

  • IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

    Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

    What does any of this have to do with the Apple TV?

  • Printer connected to airport express...shows up on iMac but doesn't on my ipad 2.  What am I missing, please?

    printer connected to airport express...shows up and prints on iMac but the printer doesn't show up on my ipad 2 when I try to print.  What am I missing, please?

    Take a look at Printopia to see if it will do what you want.
    There is a free trial, so you will know if it works before you buy. More info:
    Printopia - Ecamm Network

  • I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

    I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

    I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
    CB

  • Cannot connect airport express to ipad I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    cannot connect airport express to ipad
    I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
    Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
    I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
    BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
    I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
    So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
    Since I have had this Airport Express I have spent many hours trying to get it to work.
    It works just long enough to fool me and then takes a dump...
    Maybe this time?
    5 Minute later...
    Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
    [An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
    Wonderful Green LED though. Totally useless piece of equipment AFAIK.
    Message was edited by: Daniel Shattuck

  • Iphone will not connect to airport express extended network - macbook and ipad will - Help

    Iphone will not connect to airport express extended network - macbook and ipad will without problems.
    iphone will connect to base station no problems, I've restored settings and started again but still the same, the iphone picked up the network for the last couple of months, but not now ?

    I'm having the same issue. My AExpress used to give a good signal strength on the far side of the house extending he network created by my Extreme. However, I've noticed lately that my iPhone does not receive the same strong signal it once did. AE has a green light, I've rebooted it, and my Extreme but there is no change in signal strength. Other than the green light, how can I tell if the Express is working if I don't get a good network signal?

  • My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

    My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

    .....doesn't that seems to suggest the modem?
    That is what I have suggested....twice now. From posts above:
    My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
    and
    I believe that the problem lies with the modem, and not the ISP signal.
    Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

  • How can I print from my IPAD3 to a printer connected to Airport Express?

    How can I print from my IPAD3 to a printer connected to Airport Express? I have a HP printer and I can print from all my Windows PC and iMAC in the house. How can I print from my IPaD?

    You cannot.
    The USB port on the AirPort Express allow sharing a printer with Windows and Mac OS X, not with iOS:
    "Wireless printing over USB requires a compatible printer and OS X v10.2.7 or later, Windows XP, Windows Vista, or Windows 7":
    http://www.apple.com/airportexpress/#wireless-printing
    "AirPrint-enabled printers  connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported":
    http://support.apple.com/kb/ht4356
    The HP ePrint app also does not provide such functionality:
    Can I print from the HP ePrint mobile app using USB or Bluetooth?
    No. You can only print directly to supported HP printers on a local wireless network.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01923321&lc=en&cc=us&dlc=en &product=5199463#N1176
    Shlomi

  • Itunes will not stay connected to Airport Express with any Yosemite update.

    Since installing Yosemite (original and updates) my itunes will no longer stay connected to Airport Express on my iMac. Any ideas?
    I have no probblem at all when using ipad or other devices.
    Matt

    Hello mtvessell,
    If you are having issues connecting to the iTunes Store, then start with the article below for some general troubleshooting to get it sorted out. If it continues, then take a look at the second article for additional support. 
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/en-us/TS3297
    Regards,
    -Norm G.  

  • Can I connect the Airport Express to a TV and watch the screen of my Mac on the TV?

    Could I know if I can connect the Airport Express to the TV and watch the screen of my Mac or iPad or iPhone... On the TV?

    Welcome to the Apple Support Communities
    That's not possible with an AirPort Express. However, what you can do is to use an Apple TV if you want to mirror your iPhone, iPad and Mac onto the TV, being all of them connected to the AirPort Express. Read > http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

  • Unknown Error when connecting to AirPort Express

    I am still mystified by I-tunes not playing through my AirPort Express since I got the new I-phone 5.  As I said in my last post, music on my I-phone plays fine through AirPort as did my I-pad (before I took it back to exchange for an I-pad mini, which I don't have yet).  I've tried all the simple fixes, like powering off the computer and switching the I-phone speaker selection from AirPort before I try to play from the computer through AirPort (and no, I am not trying to play both of them at the same time.)  Plus, now it's sporadic - sometimes computer through AirPort works and sometimes it doesn't and I can't identify what is different.  No one answered my last post, so I'm wondering if this question is just stupid and the answer obvious (to most) or if it's just one of those computer mysteries that has no answer? 

    Thanks for reply.  Yes, I have a computer with iTunes, an iPhone, and an iPad.  The Airport Express is set up to allow iTunes to play through my stereo speakers from any of those devices.  The problem is, that sometimes, for no apparent reason, my computer will not connect with the Airport Express.  It appears to be random: sometimes from iTunes on the computer, I can choose the speakers connected via the Airport and sometimes I cannot.  This does NOT happen on the iPhone or iPad.  I can always successfully choose the device speakers or the stereo speakers from those devices.  It's just hit or miss with the computer. 

Maybe you are looking for

  • Hp photosmart 7510

    After scanning from my Photosmart 7510 to my iPad via the HP AiO Remote app for months, I suddenly cannot scan. The printer sounds like it is scanning and "Processing..." shows on my iPad and control panel but the scan never completes. The print func

  • Resolute song refuses to be downloaded

    I bought Astronautslis' album "You and Yer Good Ideas" off of iTunes months ago. When I first bought I received an error message saying the song won't download. After hours of soul searching and thousands of dollars in therapy I've accepted the fact

  • Purchase Order GR based Invoice varifiation Field - ACtive

    Hi, when ever Goods receipt field-WEPOS is active in purchase order,Delivery Tab at item level, Gr based IV should also get active - WEBRE, other wise system should not allow to save the Purchase document. how to control the same. any enhancement....

  • Sleep problem with iMacs

    I am happy owner of 2.8 GHz Intel iMac except with one nagging problem. When I leave my computer in the SLEEP mode for more than 24 hours it tends to not respond and WAKE when I return to use it. I have to unplug power and restart. Since I usually us

  • ORACLE_HOME disappeared, SQLPLUS - bash: sqlplus: command not found

    OK, I am a newbie but am having real difficulty with my 10G DB which I had set up on Unix Solaris box but someone was messing around with it and now I can't see ORACLE_HOME, ORACLE_BASE and ORACLE_SID, they all return blank when I try to "echo" each.