Ipad could not be synced because the sync session failed to start
My IPad Mini could not be synced with Itunes as the sync session refuse to start
What the **** is wrong with you?
So "rebooting" (it's actually called resetting and refers to the device, not the PC, Mr. IT) works, but one is not supposed to suggest it as a possible troubleshooting procedure?
The reason "try again" the sync was suggested is because this specific error message is usually generated when the iDevice starts the sync process before iTunes is ready, or vice versa. This might happen when iTunes is on a computer in sleep mode, or the device had Wi-Fi turned off to conserve power.
Both resolutions are platform agnostic.
Similar Messages
-
Everytime I try to sync my iPod Touch with updated music from my iTunes library, I get the following error message: The iPod could not be synched because the sync session failed to start.
Please help!Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi
I have an iPad mini and it was on iOS 6.1.3, my friend came and he said that he knows how to install iOS 7 for me. I gave it to him and he tried to install it, but apparently he failed to do so and an "Activation Error" is appearing on the screen now asking me to register in the developers program.
Now, we are trying to restore it back to iOS 6.1.3 using iTunes, the software downloads well and it starts restoring but that I keep getting this error message "The iPad could not be restored because the firmware file was corrupt.".
I am sure that the file is not corrupted because it's downloaded via iTunes regular download and it's not from an outside source.
I am stuck with this now and my iPad is useless this way.
Please any suggestions ?basselsamo wrote:
Please any suggestions ?
Yes, don't download Beta Software that you have no business or legal right to download and quit taking bad advice from friends.
Now to maybe get you out of the restoring jam, the only thing that I can think of that might work is to use recovery mode, unless you already tried it and it didn't work.
You can read about it here, but the instructions are posted below.
http://support.apple.com/kb/ht4097
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
HT201407 Your iPad could not be activated because the activation server is temporarily unavailable
sir I had IOS 7 beta version and it was working properly, after the launch of official IOS 7 I got "Your iPad could not be activated because the activation server is temporarily unavailable" . I can't access to my device or even back it up or restore it!!! can you help me please
The iOS 7 beta has expired. Since you had it, you were obviously a developer.
You need to log on to the Developer Forum with your developer credentials, where you will find information on how to reactivate your phone.
Discussion of beta software is prohiibited on this general forum.
Best,
GDG -
When i connect my ipad to itunes it says "this ipad could not be used because the required software is not insatlled.Run the itunes installer to remove iTunes,then install the 64-bit version of itunes." I tried uninstalling and reinstalling itunes. so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work. Plz help. using itunes 11.5 and windows
so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.) -
i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i doHello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
I powered my iPad off and when I turned it back on it is telling me to reconfigure it. So I select English then United States then I selected my WiFi then message comes up that says your iPad could not be activated because the activation server cannot be reached. Try connecting your iPad to iTunes to activate it, or try again in a couple of minutes. Have tried several times and it is still not working. Nothing will show on screen on icons nothing.
Try to Update your iPad to iOS 6.1.4 when connected to iTunes via USB too.. You do not need to touch anything on your iPad to update your iPad either..
-
HT201210 my ipad could not be restored because the firmware file is not compatible
my ipad could not be restored because the firmware file is not compatible
what can i do???iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
IPad could not be restored because the firmware file is not compatible.
Hi, i have the latest 3rd gen iPad 32GB and iTunes 10.6. I have the IOS 6 beta downloaded on my windows laptop. I had someone add my UDID to there apple developers acount. However when i press Shift+Restore and select the beta file a i get an error sayng 'iPad could not be restored because the firmware file is not compatible.' Has anybody got any idea on how to restore my iPad to the IOS 6 beta file i have downloaded?
Thanks in advanced
Joseph.You should ask this question in the Apple Developer Forums
Since iOS 6 is not officially released nobody else can help. -
I have tried everything I have found online to get my DigiCert to work.
I have exported the cert and imported it into my child domains and they look perfect.
It is just my parent domain having issues.
netsh winhttp show proxy
does show my correct proxy server for http and https and port 8080
I have tried name, FQDN and IP address.
In the Bypass-list I have tried none, *.domain.com, and a list of all domains and child domains in my forest.
I have flushed the cache
certutil -urlcache crl delete
certutil -urlcache ocsp delete
and rebooted the Exchange 2010 (Windows 2008 R2) server
No matter what, I still see in my Server Configuration for the parent domain's DigiCert cert the message
The certificate status could not be determined because the revocation check failed.
with a red X on the left hand icon. Again, Child domains all say "The certificate is valid for Exchange Server usage."
Note: In spite of having the red X, I was able to assign via EMS the services.
Webmail works fine. Outlook Anywhere fails... I suspect it is due to my red X problem.
Suggestions?
Thanks in Advance
Jim.
Jim.I have contacted DigiCert and they said the cert is working per their utility, hence the problem is outside the scope of their support.
I have followed, several times, http://support.microsoft.com/kb/979694
http://www.digicert.com/help/ reports all is well.
The DigiCertUtil.exe reports all is well and happy.
I have run
netsh winhttp set proxy proxy-server="http=myproxy:8080;https=myproxy:8080" bypass-list="*.mydomain.com"
Current WinHTTP proxy settings:
Proxy Server(s) : http=myproxy:8080;https=myproxy:8080
Bypass List : *.mydomain.com
I have flushed the cache using the commands
certutil -urlcache crl delete
certutil -urlcache ocsp delete
I still see in my Server Configuration for the parent domain's DigiCert cert the message
"The certificate status could not be determined because the revocation check failed."
with a red X on the left hand certificate icon.
To verify the cert via command line:
certutil -verify -urlfetch c:\mail_domain_com.cer
LoadCert(Cert) returned ASN1 bad tag value met. 0x8009310b (ASN: 267)
CertUtil: -verify command FAILED: 0x8009310b (ASN: 267)
CertUtil: ASN1 bad tag value met.
I suspect this is why I cannot get Outlook Anywhere to connect.
Child domains show a happy certificate icon. Parent domain does not.
Still scratching my head.
Thanks all!
Jim. -
i delete my iphone from find my i phone and now i want to make active my i phone i get the message your i phone could not be activated because the activation server failed i try it several time but my iphone is not activate help me fpls
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
The other possible issue is a device running the iOS7 Beta. If that is the case, and you are a developer, sign into the developers forums for assistance. If that is the case and you are not a developer, try google. -
The iphone could not be sycned because the sync session failed to start
I usually have no problems with my iphone or mac, and can sync everything fine. But randomly today i tryed to sync some photos etc and it came up with this:
The iphone '_______ iphone' could not be synced because the sync session failed to startSee:
iphone could not be synced sync session failed to start...: Apple Support Communities
Sync Session Failed to Start iTouch iOS5: Apple Support Communities -
when syncing ipad to my pc's itunes i get the message 'sync cud not be finished as sync failed to start' help
So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID. -
Your ipad could not be activated because the activation server cannot be reached
I had just finished updating my iphone 5 to ios 7 via wifi, so next i tried to update my ipad mini the same way. It initially said there was an error during downloading and I tried it again several times with the same error. I then connected my ipad to itunes to update there, but no luck. I tried to restore my ipad from itunes and i got a restore error 3004 message, so i reset it directly from my ipad. Now when I try to activate my ipad i get an error saying it cannot be activated because the activation seriver cannot be reached. My internet is working fine, everything works, and it cannot connect to itunes store when i plug my ipad in. My ipad appears on itunes as well. I tried putting my phone in recovery mode and restoring and updating, but that did not work either. I am not sure what else to do. Any suggestions?
Authentication servers are ALSO slammed right now.
Give it some time.
download servers VS. authentication servers -
im trying to activate my ipad and an error message'your ipad cannot be activatewd because the activation server cannot be reached.
How do I connect?You don't have access to a computer, some other options are...l
Wait for a while and try again
Try activating your iPad using another WiFi network
Ask someone who does have a computer running iTunes for help.
Take your iPad to an Apple Store and ask them for help. -
IPad could not be updated because the iPad software update server could not be contacted?
hi i was trying to update the software on my iPad when something went wrong and the iPad needed to be restored...now it wont restore! how can i fix this?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
Output through Blackmagic card?
I'm looking into the Blackmagic Ultra Studio card as aposed to outputting through an Open GL graphics card. Does anyone recommend another product? I'm only wanting it so i can correctly display colour and gamma i don't need it to record via SDI or HD
-
Problems filling material movements setup table
I am trying to fill the statistical setup table for material movements (OLI1BW). I have given a name and entered posting dates 01.01.1998 to 31.12.2002 and have put the date of termination in the future. However, the run does not start whether I exe
-
Crash report- What is the problem? How do I fix it? Process: syslogd [2594] Path: /usr/sbin/syslogd Identifier: syslogd Version: ??? (???) Code Type: X86 (Native) Parent Process: launchd [1] Date/Time: 201
-
Are there BAPI or function modules for creating posting address ?
Are there BAPI or function modules for creating posting address and budget address? We are currently use BDC program and T code FMBSPO_MULT (Posting address) and T code FMBSBO_MULT(budget address), but it is a very slow processing because we have tho
-
Uninstalling OS X Server Snow Leopard
Hi. I set up Snow Leopard server on one Mac on our net to test it out before I installed it on another. Is there a way to uninstall it on the first machine so I don't get the "Invalid Serial Number" error message on the desired server? TIA, - Alex Za