Ipad Crashed ..... Opens in recovery mode

Ipad Crashed ..... Does not switch ON..... And the time I try to restore it shows
Serial No- n/a and no other specification like capacity etc.......
Always opens on recovery mode and when i try to restore it ,it shows error 3194......
I have already tried to fix the 3194 error through hosts but... it didn't fix my problem...

Hi jzn_omg,
If you are having issues with the update and now restore of your iPad Air, you may find the troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes
Resolve iOS update and restore errors
Regards,
- Brenden

Similar Messages

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • IPad 1, stuck in recovery mode, error 1601, wont turn on or restore/update

    Its a brand new iPad,
    its stuck in recovery mode, it says restore and update but it wont restore/ update because i get error 1601, How do i fix this problem ??? it wont even turn on please help?

    If it were in recovery mode, you would see this
    If its just a blank black screen, follow these steps
    Will not turn on, or will not turn on unless connected to power
    Verify that the Sleep/Wake button functions.   If it does not function, inspect it for signs of damage.   If the button is damaged or is not functioning when pressed, seek service.
    Check    if the Liquid Contact Indicator (LCI) in the headset jack or dock connector is activated or there are signs of corrosion or debris. Learn more about LCIs.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See   "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    If something other than the Home screen or Low Battery screen appears on the display, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, try resetting it while connected to the iPhone USB power adapter. To reset, press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or the battery symbol appears.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Restore the iPhone. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

  • TS3274 iPad 2 stuck in recovery mode

    iPad is stuck in recovery mode. I don't want to restore and lose data, is there a way to do this?

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?

    My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?
    please help!

    See: http://support.apple.com/kb/HT1808 to restore the phone using Recovery Mode. You will lose all content on the phone. This is the only way to bypass the lock screen if you don't have the last computer the phone was synced to.

  • My iPad is stuck in recovery mode.  I already downloaded Snow Leopard and am making no progress.  Help!

    My iPad is stuck in recovery mode.  It was suggested before that I upgrade my computer, so I downloaded Snow Leopard and have tried resetting it, but it still isn't working.  What can I try next?

    FORCE IPAD INTO RECOVERY MODE
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • HT1414 My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on its own? There is a lot of data I want to save

    My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT4061 my ipad air is in recovery mode and it is not starting.I pressed the main key when connected to my computer but there was no response

    My ipad has gone in recovery mode when I tried to upgrade my system software.it showed a loading bar and then turned off and never started.i tried to turn it on by pressing the home key and start button simultaneously but there was no response.i even connected it to the  itunes but there was no response by the ipad

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • My iPad is stuck in recovery mode, and wont stay turned off in order to use redsnow.

          Alright so my iPad is stuck in recovery mode. I did some research and arrived at redsnow to fix the problem. In order to use redsnow's recovery fix option I have to power down my iPad. When I hold the sleep button though, no "slide to power off" appears, the screen just goes black then reboots into recovery mode 3 or 4 seconds later. Restarting it via holding the sleep and home buttons doesn't do anything. How do I get it to stay powered down? Any advice would be greatly appreciated.

    I believe I may have used the wrong terminology. My iPad screen looks identical to the picture shown in the link, which is what I reffered to as Recovery Mode. I was looking for a way to return to normal functionality, without having to restore my iPad. I have never backed up this iPad and would prefer not to lose any information on it. If this is impossible then I will just restore it and carry on.
    My main issue with restoring it is that I don't want to lose the pictures on it. If the restore doesn't erase the pictures, then I apologize for wasting your time and will be restoring it immediatly. However if I will lose the pictures than I'd prefer any other method of exiting this screen.

  • The iPad stick in the recovery mode

    Hello
    My iPad stick in the recovery mode, so when i connect it to the PC to restore it, it's keep restarting and the iTunes doesn't start
    I don't know what to do, It drive me to madness
    Hope anyone can help me :'(

    I did that already, start iTunes than plug the iPad,
    But when it's connected it keeps rebooting.
    and itunes show me this msg "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with itunes."
    and at the moment when i click on Ok it disappear from itunes and still keeping rebooting.
    And all this process repeat again like i'm in an infinite loop.
    Thank you.

  • My ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    my ipad mini is in recovery  mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • Our iPad is stuck in recovery mode after attempting to update.

    Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.

    It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
    Reiboot isn't even working. considering trying DFU mode. no idea if that will even help.

  • HT2693 My ipad has gone into recovery mode

    My Ipad has gone into recovery mode after i was asked to update the itunes i have tried restoring it on the computer to no avail

    No.
    You can get media back after the restore by: Download past purchases. Other data cannot be recovered if it wasn't stored elsewhere.

Maybe you are looking for

  • Satellite A300 (PSAG8E) - Hardware problems after installing win7 ultimate

    Hello and good day, I've installed win7 ultimate a few days ago and windows managed to recognize most of my hardware accept my build in mic and camera and another component I am not sure about what it is (Windows update automatically downloaded the s

  • Bridge CS6 Crashes on every open

    It use to crash only when opening certain folders but  now it crashes as soon as it opens. Any ideas? I use to love using it but can't now and am looking for a replacement. Process:         Adobe Bridge CS6 [3395] Path:            /Applications/Adobe

  • File Upload - When  is File saved in database

    Hi, I'm already using File Upload and Download in my application, which is working fine. Now I only need an information for better understanding. Is the file saved in the database table, when user selects the file from the file browse dialog or is it

  • Apple's Image Capture & Officejet Pro 8600

    How do I set up my OfficeJet Pro 8600 to work with Apple's Image Capture on my Macbook Air running OS X (10.9.3)? This question was solved. View Solution.

  • Java is   NOT   Platform Independent ????????

    Hai. My friend told ... we can able to say java is platform independent. but in one company (software anaylist) ask talk about java is not platform independent... so how its possible.. plz i want clear cuts... even i search in google also.. but i can