IPad cycles the wireless connection only at my home.  Any fix?

iPad no longer holds connection to home wireless. Works fine with other hot spots.  Other wireless devices at home still connect fine, as did iPad preciously. The change happened when upgraded to IOS 7 0.5. Upgrading to 7 0.6 did not fix issue. Apple store Genius Bar rebooted iPad, and sent me home. Issue remains.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • TS1315 I have just purchased the new iPad with the camera connection kit. I just want to bewant to be able to insert my SD card into the Pad and only view my photos, not import them to the pad.  Can this be done and how do I do this.  Please advise.  Thaj

    I have just purchased the new iPad with the camera connection kit.  I just want to be able insert my SD card into the Pad and view my photos, not import them.Can this be done and how?  Please advise.  Thank you.

    See this article: iPad: Using the iPad Camera Connection Kit
    No, this canot be done, afaik. When your camera or card is connected, you will see the thumbnails in the camera pane, but not full size preview. So to browse your photos on the iPad you will need to import them to your camera roll. But you need not delete them from the camera or card after importing, so you might simply import selected photos to your camera roll from the camera grid and then delete them again from the camera roll after importing and browsing, without removing them from the card/camera.
    Regards
    Léonie

  • Manual duplex times out on wireless connectivity only - D5560 printer

    The printer is set for manual duplex. I use a Dell Insiron laptop (OSW7) with a wireless connection to Netgear Wireless-N 3000 Router. IP address is 192.168.1.5:3910 for the wireless printer.
    The pages print on the one side and then simply stop printing on the last page just before the printer should be releasing it.
    If I leave everything alone, approx 15 seconds later the page gets released and the print cancels.
    If I manually tug the final page out of the printer and manually insert for the second side the page has a small area at the end unfinished. The first page of the second side may have this data printed on it.
    I've reinstalled the software and all hardware has driver updates etc.
    My PC is cable connected to the router and I've never had this happen. It is only on the wireless connection for the laptop.
    Is there a solution?

    Does the printer recover by power-cycling your switch or unplugging the LAN cable to the printer?
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How do I remove the wireless connection from my Apple TV 2.

    I have an Apple TV 2 and I want to sell it. Before selling it, I want to remove my wireless connection which has my home network password from the Apple TV. How do I do it ?
    Thanks for helping me.

    Put it in DFU and do an update. This will not only update it, but it will remove all settings. DFU =  hold menu+play while plugging it in.

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Airport keeps dropping the wireless connection to my network 2 or 3 times a day.

    Hi,
    Since apple's recent firmware update for my macbook pro, airport keeps dropping the wireless connection to my network 2 or 3 times a day. It then searches for a network but can't find it, but if I select my network manually it connects immediately ???
    Any fixes for this ..... in layman's language please!
    Thanks,
    Steve

    It is not the router. There are a number of factors that are involved. If the router is a G/N router you may have to switch to G-Only (or disable N). You may also have a 5 GHz wireless phone or other routers in the neighborhood interfereing with the signal.
    Try this:
    1. Open network preferences. Take note of what IP address is assigned. Then, click Advanced.
    2. Click on TCP/IP and select Using DHCP with manual address and type the IP address below that.
    3. Click OK.
    4. Set your Router to Wireless-G only (or disable N) and change the channel to 11 or some higher number.
    This should keep it from dropping the wireless connection. It is a bug in the OS. Apple has not fixed it in 3 years.
    You wireless connection will be a tad slower, but you really won't notice.
    Hope that helps.
    DB

  • Hi, my iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there eny way I can get rid of this?

    Hi,
    My iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there any way I can get rid of this annoying problem? The bottom line is that I'll stay away from apple, because they basically make it so the devices control you, and you don't control the devices. I've even jail broken to try and fix this. I need my USB drives to work as they have many folders. Formatting doesn't work, so it is definetly down to the software and it's restrictions.
    Please help.

    The camera connection kit is to be used to connect a camera or an SD card and transfer photos/video. You can't fault them for something that happened to work and doesn't any longer. There are drives like the seagate available if you need access to extra storage
    http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/goflex -satellite/

  • After downloading Yosemite, my HP Photosmart D110 printer will no longer work. The wireless connection is fine but says it cannot find my printer when trying to print.

    After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system
    If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Network Printer Troubleshooting
    HP – Wireless Printing Center
    HP – Printer Not Found During Wireless Installation

  • Satellite A660-13T - I can't go from 65 Mbps with the wireless connection.

    +Sorry for my English, is not my native language.+
    Hi,
    I expose my problem:
    I can't go from 65 Mbps with the wireless connection. I can't move from that connection speed.
    Laptop configuration:
    * Windows 7 Ultimate 64 bits (with all updates installed).
    * All drivers updated properly.
    * With the latest version of BIOS.
    Router:
    * Tp-link TL-WR1043ND, installed 3 meters above the laptop (without obstacles).
    Configuration of router:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, this channel is relatively free).
    * Channel width: 40 Mhz.
    * Maximum tx rate: 300 Mbps.
    Other information:
    * The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated firmware.
    * I have tried all settings of the wireless card.
    * Bluetooth off (without interferences).
    * {color:#ff0000}There are other computers on the network that connects 150 and 300 Mbps (with the same network configuration).{color}
    Thanks in advance,
    Greetings.
    Message was edited by: Xibalba

    Hi buddy,
    > I kept O.S. original for a week and the problem was the same
    If you had the same problem with factory settings you should test another router. Maybe its a malfunction of router or something else (not compatible to your WLAN card).
    Furthermore ask the manufacture of your router if they know something about this.
    In worst case its a hardware malfunction of your notebook. You should contact nearest service centre. I believe they can fix it under warranty, because A660 is pretty new notebook.
    Good luck! :)

  • Re: Satellite L350-262 - The wireless connection adaptor is disabled

    Basically my laptop is a couple of weeks old, it was working fine wirelessly until suddenly one day it stopped, it nows says The wireless connection adaptor is disabled, how can I resolve this? any suggestions?
    Thanks

    Can you please provide more details?
    Can you see the WLan card in device manager?
    Are there any yellow exclamation marks?
    Does the other FN buttons work properly?
    Is your BIOS up to date? Did you set it to default settings?
    If not do this!
    Last solution; try system recovery. This will set the notebook back to factory settings.

  • I can't import vertical photos to my iPad using the camera connection kit. Horizontal photos import without a problem, but verticals have a red exclamation mark. Help?!

    I can't import vertical photos to my iPad using the camera connection kit. Horizontal photos import fine, but verticals have a red exclamation mark, and do not import. Help!?

    I have the same problem and apple needs to fix this - but in the mean time you can manually select the vertical photos then "import - import selected" and you can get your verticals. We need a better fix. THIS IS A BUG!

  • I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

    I have a MacBook Air, which I just upgraded to OSX Lion. I also have the latest version of iTunes. When I try to stream to the AirPort, the Airport resets, and the wireless connection on the macbook locks up. Any suggestions where to start?

    To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
    Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

  • I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

    I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

    Hello Lcw2610,
    I would recommend deleting the affected movie from your iPad, and redownloading the movie.
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Download past purchases
    http://support.apple.com/kb/HT2519
    If the issue persists, please do report the issue to the folks in our iTunes Store.
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

Maybe you are looking for

  • UTL_HTTP to call a web service to send SMS

    Hi All, I am trying to send SMS through a web service, and before doing it on a form, I tried to check this with UTL_HTTP from sql plus below given is the code i tried SQL> SET DEFINE OFF SQL> SELECT UTL_HTTP.REQUEST('http://80.227.146.106/Receiver/s

  • Import Scenario from BPR - how to view the Version after import

    On SOLAR01 when you import scenarios from the BPR, how can you view the version of the Products that were imported? Sometimes in the BPR there are several versions available to import for a particular product. Once you have imported those business pr

  • User presets and external plug-ins missing after V 2.6 upgrade

    I just upgraded to V2.6 and noticed that all my user  Presets for Develope and Print Modules have gone missing. It also happened to all the third party plug-ins software. While the software can be re installed, are the missing user presets gone forev

  • Capture Problem After Upgrading to OS 10.4.9

    Everything was working fine when I was using OS 10.4.8. Now, when I try to capture video, the audio is way out of sync. This never happened before. In case it matters, I am using FCP 4.5. Thx

  • BMW i3 Remote app is crashing after todays update. Why?

    I installed the latest version of the BMW i3 Remote app which was updated to support the Apple Watch. After installing there update the app continually crashes. Any updates on why this is occurring?