Ipad disabled devices could not connect to saved wifi netwrok
I have deployed more than 1200 stundet Ipad wifi devices in school and i have Airwatch to manage these devices , I face a problem for disabled student ipads , once these devices disabled it wont be able to connect to saved wifi so i could not clear the passcode .
can any body provide his suggestion
regards
THank you for your infomration , it is just intoruction about passcode but our issue is once the iPAD is disabled and the device is rebooted (restart) , wifi netwrok signal is not appeared and device will stay disconnected on netwrk .
once the remmeber the passcode and you login to device the wifi signal appears
the question is how we can keep device connected to wifi even if it is disabled ???
Similar Messages
-
I have a PC, Iphone and Ipad. The IPhone synchs but an IPad sync generates a "could not connect to Iphone 0xE8000065" error!
It thinks I am syncing the Iphone again as opposed to the Ipad.
I rebooted both but Apple failed to sync the Ipad again.
Thoughts?I have been syncning fine until this so I was relcutant to believe anyhting need to be changed.
Howver I control - alt - deleted to get MS task manager and then disabled all Apple processes and then rebooted. I also renamed "Ipad" as Ipad1.
Not sure then which if either was responsible for the cure but it is now working.
Why do Microsoft and Apple find it so difficult to play together? -
How to fix ipad error -1004 "could not connect to the server"
I am trying to access the tablet edition of Vanity Fair. I already have a subscription and when I click on the "Tap here for acces to the tablet edition" it takes me to a screen & this error message pops up:
Cannot Open Page
This page cannot be opended because of an error
This error is "Could not connect to the server."(-1004).
I have deleted, reinstalled via itunes on my mac, done a hard restart and nothing seems to be working. I can browse the web using safari and am connected to the internet via wifi.
Any suggestions?I have the same issue, too. My New Yorker subscription is fine, always has been. But my Conde Nast Traveler subscription won't work. I can get to the screen where you enter your information (either with name and address or subscription number and zip code), but once I press Continue I get the error.
I emailed Conde Nast's customer service, and this is what they said:
Dear Subscriber:
Please accept our sincere apologies for the inconvenience you have
experienced.
We have applied a fix to the app for the server error and you will need
to close and re-open your app. To do so, please double click the "home"
button to close the running app and then re-open your app.
Please let us know if you still experience any problems.
If you should need further assistance, please be sure to include all
previous e-mail correspondence.
Thank you for your interest in Conde Nast Traveler.
Sincerely,
Shar
That didn't work. I tried the restarting the iPad, as someone here suggested, but that didn't work, either. Interesting that this seems to be a Conde Nast issue - my NY Times and National Geographic subscriptions are just fine, too.
I'm afraid I'm not sure what the guidance in this knowledge base article means: "Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software." How does one do that on one's iPad?
I actually wonder if it's a firewall issue. Are any of you attempting to enter this information at work, for example? I am, and my company has a firewall/proxy that gives me issues sometimes. I'm going to try to find a wifi hotspot at lunch to see if it'll work there. -
Gnome applications could not connect to college Wifi using netcfg
Hi, I am using netcfg to connect to college wifi to access internet and i can access internet in CLI applications (pacman, clam), firefox and thunderbird but online account settings, gwidder and other gnome apps cannot access internet.
I also installed networkmanager some days before but then i uninstalled it.Abhishek_Harlalka wrote:My college provides DHCP connection to us but i am using static (manually assigning IP) to get better speed.
Don't do that. It creates havoc on the network. If it were my network, I would block your MAC.
Why do you think you "get better speed" with a static address?
Last edited by ewaller (2012-05-30 17:23:12) -
Safari is not able to open because site is not responding.
I have an iPad 2nd generation .
Version ios 8.2.
capacity 12.5GB
available 4.5 gb.
I have tried turning the unit off then on. I have looked at settings but can't tell what to do there.
Thia all started when I updated the last ios versionTry Settings > General > Reset > Reset Network Settings. Enter your passcode.
-
Please help me to get the wifi out of being dim so I can connect again.
This almost always means there is a hardware failure that requires replacing the phone. However, first try the suggestions in this support article:
iOS: Wi-Fi settings grayed out or dim -
Imac connects to time capsule through wifi but ipad and iphone will not connect
I just installed the new Airport Time Capsule. My Imac connects fine through wifi bit my ipad and iphone will not connect to the wifi. They appear in the wifi settings in the devices but will not connect. I have reset modem and time capsule and tried forget network and nothing is working. ANy assistance would be appreciated. Thanks
So I called apple support being fairly certain that I wasn't going to be able to fix this over the phone but essentially, it now works flawlessly with my iOS devices. Here is what I did.
I have a Motorola cable modem surfboard 6421.
I reset my network settings to dhcp and NAT from the default bridge only mode which the tech said only allows one device to connect at a time. Considering my MBA was already connected to the AE, that would explain why my other iOS devices wouldn't connect. After I changed the settings for the network to DHCP and NAT, the router restarted. I then disconnected the power and coaxial cable from the cable modem and reconnected it and once everything came back up, all devices connected fine. Good throughout and signal. Hope this helps. -
IPad 4th gen will not connect to some wireless networks
My iPad 4th generation will not connect to some wifi ssid's. My iphone connects and my wife's iPad mini connects just fine. Some wifi'so always connect and others do not. I notice it often in hotels. I also have two wireless routers at home. One connects fine. The other only connects via 5g broadcast, not on normal ssid broadcast, yet all other devices can connect just fine. Is this a hardware issue? Or some sort of setting?
I have tried every fix I have read online:
reset network settings
toggled airplane mode
toggled wifi button
rebooted
ineven reset my iPad to factory condition and reloaded everything from backupMy iPad 4th generation will not connect to some wifi ssid's. My iphone connects and my wife's iPad mini connects just fine. Some wifi'so always connect and others do not. I notice it often in hotels. I also have two wireless routers at home. One connects fine. The other only connects via 5g broadcast, not on normal ssid broadcast, yet all other devices can connect just fine. Is this a hardware issue? Or some sort of setting?
I have tried every fix I have read online:
reset network settings
toggled airplane mode
toggled wifi button
rebooted
ineven reset my iPad to factory condition and reloaded everything from backup -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How do I restore IPAD functioning after receiving a message stating "Ipad is disabled" Note. user and passcodes are verified as enabled. Also my mfgr serial number was supplied. Downloading latest updates per direction via my HP hardwired to Ipad, failed after an hour with a message "Itunes could not connect w/Ipad because it was locked with passcode!"
thanks, Applesauce42 turning sour.Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115 -
When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device
Hi Centreless,
If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for using Apple Support Communities.
Best,
Brett L -
When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes. iPad will not charge. Restarted iMac and rebooted iPad and no difference.
Hi GJ374,
Thanks for using Apple Support Communities. This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Ari -
I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?
Quit iTunes, restart your computer, reset the iPad and try again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Itunes could not connect to the ipad because an invalid response was received from the device
Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now.
Maybe you are looking for
-
Want to free up disk space by deleting photos but unable to do so
-
Hi Experts Read table COSP: Check the input to the process order. If zero records are read the order can be dropped. The read may return more than one record. If the CO subkey is the same the records can be summed and processed as a single line. If t
-
Windows 7 + Adobe Reader 9.3.4. On opening I-131 form from USCIS site all the check boxes are shown on the left of the page whereas they should be on the right. Also brackets and paragraph numbers are in the wrong place and order
-
Adding a tab on to Activity Overview Screen in CJ20N
Hi Experts, I have to add a new tab may be called as ' PRICING' on activity overview screen right next to Purch. TAB Basically, when we select an activity in CJ20N and click on material component, where we actually put in the material number, requirm
-
XL Reporter an invalid character was found in text content
Hi all Any idea how to solve this error. We managed to limit error to only on date on 8 Jul 2014 relating to one Item Code created on 1 Jul 2014 but there is no further clue. This is linked to a Sales Invoice. Kedalene