Ipad Display Has Weird lines,Doesn't Do anything?? HELP ASAP

About  week ago i turn on my ipad to use it and it was like this with lines on the screen i cant turn it off or anything,SIRI does say its not connected to internet.i tried restoring it but it didnt work so'IDK what to...BTW is an ipad 2 16gb WIFI HEEEEEEEEEEEEEEELLLLLLLLLLLPPPPPPPPPPP MEEEEEEEEEEE

Try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let it reboot and see if that helps.
If not, contact your local apple store and make an appointment for them to look at it.

Similar Messages

  • 20" Widescreen display has weird lines after any movement of the cursor

    there are groups of blue and red elongated dots (sets of 8) staggered horizontally on the screen, a few persistent and some that seem temporary but occur after any activity on the monitor (e.g. drag a folder or screen)
    Some go away after a reboot, but reappear with new activity. Can anyone help?

    I looked for you I would first go to System Preferences. Click on DIsplay you will see numbers under Resolutions go all they way to the bottom it should say 1680 X 1050 Hi light that on the 20inch Apple Cinema Displays. Next to where Display was is Color click that you flow the expert instructions
    You will see only Cinema Display when done it will auto name it Cinema Display Calibrated
    Check your DVI cable & GPU as could be loose
    Instructions
    To fix a stuck pixel
    Increase your display resolution setting to the maximum supported by your screen. Launch the JScreenFix applet (below) and position the window over the stuck pixel. After 5 minutes move the window and observe the results. If the pixel remains stuck, repeat. From extensive testing, most stuck pixels are repaired in less than 20 minutes. If a stuck pixel remains after running JScreenFix for 20 minutes it probably can not be fixed by JScreenFix. You might like to try a pixel massage. Sometimes stuck pixels return after a period of time, JScreenFix deluxe can automatically repair reoccurring stuck pixels when you are not using your computer.
    To reduce screen burn-in
    Disable your screen saver. Launch the JScreenFix applet (below) and enter fullscreen mode. This is achieved by pressing F11 in most browsers, if this fails you will need to consult the documentation for your Internet browser. It is important that JScreenFix fills the screen fully or you may suffer additional unequal burn-in. Leave the applet running for about an hour and observe the results. If you notice an improvement, continue running JScreenFix until the burn-in is more acceptable.
    Please note that completely removing screen burn-in is impossible but it will fade with time. The only way to equalise a screen image is to burn-in the parts of the screen that have had less use. JScreenFix deluxe is a preventative measure that monitors screen usage and equalises the screen when you are not using your computer.
    Click on the link to launch It made my Apple Display look better
    http://www.jscreenfix.com/applet.php?width=1680&height=1050
    Screen burn, image retention and recalibrating pixels
    Static, non-moving images left on-screen for extended periods of time can leave a "shadow” on , lcd displays (this is true of models from all manufacturers)
    You are normally told to avoid extended display of static images. Games consoles can also have a negative effect on panels.
    PixelProtector™ will recalibrate pixels uniformly and remove any residual effects that may have occurred.
    TV channels that have a static logo permanently on screen have a real negative effect on lcd TV’s and displays. Pixels begin to memorise these images, upon switching channels you will still see the logo in the form of a shadow. After several minutes it will disappear (If not you have burn in). If 99% of the shadow has disappeared you will not notice the 1% that remains. It is the continual build up of the 1%’s that is called residual effect. Not just restricted to TV channel logos. It’s build up over months and even years will lessen the picture quality of you TV. The issues with screen burn and residual effects are far more complex however we have tried to simplify its cause and effect for obvious reasons.
    PixelProtector™ can remove burn in and residual effects. It uses a wash tools that switch pixels on and off at a very fast rate (this is not in any way harmful). Included is a white wash for lesser burn in and image fix. In other words it recalibrates the pixels uniformly by removing any memory they may have.
    There are different types and levels of burn in. The most severe of which occurs in the first 200 hrs of the panel's life when pixels are at there most excitable. In this time frame pixels can permanently memorise static images that have been left on screen for prolonged periods.
    We have many customers who have removed screen burn from their panels by using the removal tool regularly, as per the instructions in the DVD.
    In many cases it can be removed after just one session.
    If the burn in is not removed first time, it will have been significantly reduced. Don’t forget it is easier to prevent burn in then it is to remove it!
    Dead Pixels
    Dead Pixels occur when the individual cells burn out or do not energise correctly, PixelProtector™ DVD Edition can help diagnose and in some cases re-energise dead pixels to help you get the very best out of your screen.
    Many manufactures believe that 3 drop outs are acceptable. We believe even 1 drop out is unacceptable.
    With plasma TV’s a dead pixel will appear black with LCD it may have only lost one wavelength and is only visible when certain colours are on screen. When you buy a new panel it is worth investing in a copy of PixelProtector DVD as some panel may have a drop out from the factory. Your best opportunity to have the panel replaced is when it is new.
    User Friendly
    PixelProtector™ has been developed with home users in mind. During its development stage one of the main obstacles we had to over come was insuring every one could use it (not just engineers and techno buffs). We tested the DVD on many groups of people whose feedback was invaluable in making PixelProtector™ the best product in the market.
    We back up our product with full on-line support and help for all our customers.
    PixelProtector™ provides a real user friendly solution to making sure your TV is performing to its full potential and that you are getting the best out of your equipment. It easy to use all you need is a DVD player! So click here https://www.pixelprotector.com/screen-cleaner.php
    One of the biggest problems with monitors is most people never calibrate them and just use themstraight out of the box, a lot of people don’t even use their drivers disks. If a disk came with yourmonitor, even if it claims to be plug-and-play, use the hardware setup and install it, it gives you allthe correct refresh rates and color depths and screen resolutions possible. This allows getting themost out of the monitor while preventing damage. Also the hardware setup may create an ICCmonitor profile that Windows or the Mac OS can use with its Color Management System, ICM for Windows and ColorSync for Mac. While generally better than nothing, keep in mind it is a generic ICC profile, it can only assume average ambient conditions that are not likely to be yours
    Common issues with LCD screens include:
    Trailing or blocking effect on screen (pixilation)
    Pixel drop out
    Unnatural image blacks are dark grey
    How PixelProtector™ can help resolve these issues:
    Trailing can bee seen on some panels when bit rate levels are high.
    High bit rate levels are normally reached when watching fast action scenes in movies or programs, the image starts to trail or lag and even blocking in some cases.
    PixelProtector™ will help to minimize or even eliminate trailing buy calibrating your panel correctly and insuring you have the right settings and connection in place.
    Pixel drop outs are one of the most frustrating of issues for anyone who has an LCD. When a screen suffers from pixel drop it can be fixed in some occasions. If the whole pixel is dead then nothing can be done to fix this. If one wave length has gone in the pixel i.e. blue. This can in some cases this can be fixed by recalibrating pixel color production using PixelProtector™.
    We have a 4 in 10 chance of fixing the problem.
    The DVD will highlight if the whole pixel is dead or if one wave length has gone.
    One of the biggest issues LCD’s have is producing pure black. LCD panels produce a pure white light and then subtract the colors that are not required. So to produce black is difficult, making sure that you first calibrate its black and white setting is essential to minimize this issue and get the best from your panel PixelProtector™ includes specific tests and adjustment screens for this purpose.
    I know Apple has help me in the past by telling me to make a 100% White pure white screen saver overnight.
    I hope I was of help.

  • My ipad display has turned x-ray.  Is it broken or has settings been changed.

    My ipad display has turned x-ray.  Is it broken or has the settings been changed?

    Go to Settings > General > Accessibility > White on black and turn this OFF.

  • My ipad screen has turned color and looks "over-exposed" - help!

    my ipad screen has turned color and looks "over-exposed" - help!

    Settings > General > Accessibility > Invert Colors Off

  • Hi I got an email from itunes saying that my pre order was ready and when I click on the link from my ipad it takes me to the itunes store app and then it doesn't do anything help with this please.

    Hi I got an email from itunes saying that my pre order was ready and when I click on the link from my ipad it takes me to the itunes store app and then it doesn't do anything help with this please .
    <Link Edited By Host>

    Thanks for your advice, I went to the apple shop today for a face to face meeting with a tech and he checked everything and could not figure out why I was having this problem so we decided to give up on that account and create a whole new one for me using a different email address.
    Now I can download apps on both my iPhone and ipad2.
    If anyone is reading this in Brisbane Australia go to the Chermside apple shop and ask for Wade. He was fantastic!
    Jan

  • HT4097 Ipad screen has  moving lines on it and is unresponsive

    I have the 3rd generation Ipad with iOS 6 on it. I was using it yesterday when i closed my case, and left it for about 10 minuets. When i came back and opened my case, the screen was completley messed up! It has moving lines all over the screen that are a mixture of white, and grey. then it has an even darker moving pixel going across top top of my Ipad, about one inch from the top to be exact. the Ipad will lock and unlock using the top button, but thats all it does. The ipad will also not power off easily. The only thing close to it turing off was when i did a hard shut down and held the home button and the lock button at the same time, but after the screen turns off and i let go of the buttons, the ipad turns back on and goes back to the same lines everywhere.
    I purchased the ipad about 3 months ago and this is the first problem i have had. I have NEVER dropped it and the case i use is an Apple smart cover that uses a magnet to stay connected to the Ipad. I have also tried putting it in recovery mode and wiping my Ipad but have had no luck with any change. Please someone help me and figure out what i need to do.

    I hope someone can help as I have the same problem with my iPad!

  • ITunes has weird lines all over the screen, then crashes.

    Installed iTunes 8.0.1 and it's got the same configuration troubles. It happened when I installed iTunes 8 but I just did the whole regedit solution and changed permissions. Have tried doing that for 8.0.1 and I can change all the permissions the right way but it still does not fix the problem. Have also tried finding and replacing the iTunes.exe in Program Files but either I'm blind or it's just not there because I can't find it anywhere. The only way I can get into iTunes is by plugging my iPod in, it opens iTunes without prompting a restart of the computer. However, this lasts between 10-15 minutes before the interface just changes, it gets lines where the columns are and all the album artwork in the Genius sidebar is replaced with 'Cannot Find' symbols. At this point iTunes crashes and I have to close it and plug my iPod in again to get it to come back up. What in the blue **** is going on?

    Bump!
    I'm also seeing some weird lines across the screen before itunes crashes. It happens after an hour or so of using itunes. I'm using Vista with iTunes v8.0.2.20. Any suggestions? Could it be the size of the library (~65,000)?

  • IPhone 5 has vertical lines on the screen. Help !

    Hey a few days ago. I left my phone on a table faced down in a small puddle of bubble mix. ugh.
    Everything works the sound, touch screen, camera. No glitches. But my phone is discolored & has vertical lines.
    I was wondering of If should just get a new screen or if there's a better way ??

    Try backing up the phone and then do a restore, when you restore set it up as new to see if it still persists if it does you''ll probably need a repair.

  • 19" Samsung 2nd display has "wavy" lines

    I bought a Samsung SyncMaster 906bw as a second display for my 24" iMac. I have it connected via the included VGA cable. The displays resolution is at 1440x900 with 60 hertz.
    The problem, is that there are wavy lines continuously moving up the display. It's kind of hard to explain, think of those bars moving up a CRT display when they are filmed on video. I've tried adjusting the resolutions and hertz, but no dice. Any idea what could be the problem? Is it the display, or the video card?
    24" iMac   Mac OS X (10.4.9)   30 GB iPod Video

    This page has a solution:
    http://ezinearticles.com/?Lets-Resolve-the-Frequent-Troubles-of--LCD-Monitor-Our selves&id=82112
    "Wavy lines on the screen:
    In some instances you may encounter wavy lines on the screen. These are usually 1/4" thick and move in a vertical motion. This is caused by a noisy electrical feed from a wall outlet. If you change your vertical refresh rate under display properties to 75Hz this effect should disappear.
    Don't forget to mark your question as answered.
    I bought a Samsung SyncMaster 906bw as a second
    display for my 24" iMac. I have it connected via the
    included VGA cable. The displays resolution is at
    1440x900 with 60 hertz.
    The problem, is that there are wavy lines
    continuously moving up the display.

  • IPad screen has colored lines

    The screen on my original iPad has horizontal colored lines and won't turn on.  This happened suddently.  I restored it via iTunes, but the colored lines are still there.  Please help!

    Sounds like a potential hardware issue, in which case it would need to be repaired, or replaced.

  • Display has distored lines?

    My Mac Pro 2008 model (quad core, not 8-core) recently came up with a issue that has distorted colors and lines. It shows up on both monitors (I run dual monitors) with my 8800gt. It won't load past the beginning apple start up. I believe it is the video card, so I ordered a Geforce GTX 285. Will it run without a problem if I were to use that with my 10.5.8? Or do I somehow need to install the drivers? Or is it not the video card at all? Thanks!

    I am new to Mac and have a PowerBook G4 12" display, and I am having the same problems! I have lines in the graphics, and the taskbar seems washed out and so do menu backgrounds.
    I have no idea what I did! And it is driving me crazy.
    I have display set at 1024 x 768 and millions of colors.
    Any help is appreciated!

  • Macbook pro 15" retina, display flickers, weird lines follow cursor

    Just got this MacBook Pro on Christmas... Installed Microsoft Office Suite, Adobe Photoshop, and Adobe Illustrator today. Later in the day the display became very discolored; vertical and horizontal "shaded" lines follow the cursor, areas above open windows are discolored (lighter), and the screen flickers when typing. I did the software update and have restarted the system, but it is still having issues. Does anyone know of a fix, short of getting into an Apple Store or scheduling a call with Apple?
    Thanks!!
    Maggi and Joe

    Nope - it sounds as if you've GPU issues and the discrete GPU is soldered onto the logic board. take your new machine into your local Apple Store for a replacement. Don't wait too long!
    Clinton

  • I have an iPad and an iPhone 4...received an email with an attached jpeg...iPad displayed it fine, iPhone doesn't recognize it??What am I doing wrong?

    Why would my iPad 2 recognize and display an attached jpeg and my iPhone 4 not? Both are running iOS 5.1.

    Try Settings > General > Reset > Reset Network Settings.

  • PowerBook G4 17-inch, display has vertical lines or fades to black

    My screen fades to black or It will have verticals lines all over or a single horizontal line .. depending on its mode I guess, but I have to slightly wiggle or twist my screen and then it pops back to normal. Strange.
    I have a larger monitor that I use with no problems and it serves as my backup now just incase my 17" screen connection completely drops.
    What is the possible cause? I have NEVER dropped my laptop and I have been looking for things similiar on the board. Can anyone help me out?
    One possible solution ... just sale it now and get the MacBook Pro.

    What may have happened is the power inverter board to the LCD has gotten damaged or the cable to it has gotten damaged. http://www.dttservice.com/ I've found is relatively inexpensive at getting it fixed, if you can't convince AppleCare to cover it.

  • Macbook Pro's display have weird lines

    Hey everyone,
    I have a macbook pro (15-inch, Early 2011), sometimes horizontal and vertical lines randomly show up on my screen (photo below)! I' ve notice that happen when I have photoshop and illustrator opened. Is graphics card problem? Any thoughts? Thanks
    Processor 2 GHz Intel Core i7
    memory 8GB 1333 MHz DDR3
    Graphics AMD Radeon HD 6490M 256 MB

    i have the same problem. and i saw on apple website https://www.apple.com/support/macbookpro-videoissues/, that they have opened a replacement program for it. so i sent my macbook pro to an authorized apple service provider. website : http://www.ishop.com.gh/
    and they asked me to pay $1000 bucks before they will replace the motherboard.

Maybe you are looking for

  • After upgrading to Mountain Lion, I can't delete/move emails using Mail app

    I upgraded to Mountain Lion from Snow Leopard and having problems with my Mail application. The long and short of it is that I cannot delete or move emails from my Inbox.  When I select an email in the preview panel and delete it, it disappears, but

  • How to copy data of a table to the same but on a DIFFERENT MACHINE?

    Hello experts, I want to copy all entries of table TE422 to the same, but on a <u>different machine</u>. I created a transport request (workbench request using TABU) intending to copy the entire table data from QA into DEV environment. However, this

  • Can't create connection in SQL developer

    hi, i download sql developer from oracle website but when i want to start and start it with making new connection it always give me error saying test faild IO error: the network adapter could not estabilished a connection please help i am using windo

  • Change documents optimization Business Partners and Products

    Hello guru's Does anyone know if it is possible for the objects Business Partner and Products to make settings on which changes are recorded in the change documents and which are not? e.g. I want a change in the field "Last Name" to be recorded in a

  • Export Address Book Features

    I'm trying to simplify managing Address Book contacts for exporting to an e-mail marketing application (Campaign Monitor). The problem is that when a contact has multiple e-mail addresses they will be displayed as a separate column in a CSV file but