IPad display suddenly not working properly.

iPad 1 is about 6 months old. All of a sudden, display is displaying colors incorrectly.
Everything is inverted or monochrome or something.
I have restarted and restored, to no avail. I have also verified the most current iPad and iTunes Software.
Any ideas short of shipping to Apple?
Wes

Wes,
Check Settings>General>Accessibility>White on Black>Off.

Similar Messages

  • My IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help

    my IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help

    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/kb/TS5356
     Cheers, Tom

  • My ipad display is not working but siri is working

    I have Ipad 4 IOS 8.1.2 and suddenly its display is gone but if i hold the home button then siri is working the sound of siri is coming bit display is not there I kept my ipad for charging and then also its not showing anything. Please help me

    Try doing a reset. Hold down the home and power buttons for about 15 seconds or until Apple logo appears. No data will be lost.

  • Formac TFT display suddenly not working help!!! G4 MDD DP1.25

    Hi all...could use some pointers here. My formac 17" TFT display has suddenly stopped working on my MDD G4 DP1.25 - I use the standard graphics card. Turned the mac on today, and the display just wont turn on, though the silver light on the display flashes (as in standby) which means it's getting power. I also have a CRT display attached to the same card, and it's working as normal which I presume means that the graphics card is not dead. I tried booting from a different startup volume, same result. Any ideas please?? thanks!

    no it doesn't support multiple inputs, it just has an on/off switch and is connected to the radeon 9000 pro graphics card (as shipped with the G4) via the ADC connector. Like I said, the VGA monitor that's hooked up to the same card works ok. And....weirder still, the Formac monitor has USB ports on the back, and although the monitor will no longer work (just the pulsing light on the front suggesting it's in stanbdy mode) the USB devices will still work when connected to the monitor - so this means either the card is half working or the monitor is half working!!! But I need to know which before I spend any $$$. Anyone got any ideas please? thanks!

  • SSAS Display Folders not working properly after using Translations

    Hi
    I have a Cube with many fact tables and each having many measures.So for user convience i have created display folder for measures inside measure groups and everything was working fine.
    But now i have created Translation (English(United States)) for measures,Calculated member and Dimensions and Processed.I observed that the display folders are working for calculated measures but weirdly the other measures display folder property is not
    getting applied.
    Please let me know if anybody came cross this and fixed.

    Hi Hrehaan,
    According to your description, your display folders in not working after using translation. Right?
    In Analysis Services, this is a known bug. However, we have workaround for this issue.
    Solution:
    1. Locate your cube in Solution Explorer
    2. Right click on it and choose 'View code'
    3. Find the corresponding <Translation> tag - look for the Foreign name of your Calculated member
    4. Below the <Caption> tag place a line with <DisplayFolder> tag. The properties within Translation tag should look like:
                  <Language>1001</Language>
                  <Caption>Foreign name of Calculated member</Caption>
                  <DisplayFolder>Foreign name for the display folder</DisplayFolder>
    5. Repeat for all your calculated members.
    Please refer to the link below:
    No display folder translations on the calculated members
    If you have any question, please feel free to ask.
    Simon Hou
    TechNet Community Support

  • Dim Display feature not working properly

    When I first got my 8330 a few days ago, the display dimming feature worked just fine.  Now, with Backlight Brightness set to 100 and Backlight Timeout set to 30 seconds, when I toggle "Automatically Dim Backlight" to ON, the display dims as soon as I save the configuration.  It stays dimmed continuously from that point on.  To get back to normal I have to toggle the "Automatically Dim Backlight" to OFF, but then it just stays on full brightness for the 30 seconds.
    Larry 

    <p>Cool, thanks for the tip.  I never thought of that.  Ithink that should work, I'll let you know if theres anyproblems.</p><p> </p><p>Along a similar line of thought why is it that when I insert aUDA using a load rule, and the option for 'Allow UDA Changes' ischecked in dDimension Build Settings, why does it not overwrite theprevious UDA, instead it creates duplicates, or three or fourcopies of the UDA I'm trying to load.  However if I uncheck"Allow UDA Changes" and have "Allow PropertyChanges" it will overwrite the UDA?  Is that a known bugin the system?</p>

  • Thunderbolt display suddenly not working

    I have a brand new MBP (retina), purchased about 2 months ago.  I also purhased a 27in thunderbolt display about 1 week ago.  The display has been working fine until tonight.  When i tried to wakup my laptop from sleep the thundebolt display didn't do anything.  I re-plugged all the cables and still got nothing.  Rebooted MBP, nothing... shutdown MBP, still nothing.
    Removed all USB cables from display, pulled power cord from display, re-connected, still nothing.
    Went through the guides on here about reseting PRAM, NVRAM and SMC.  Done all that, and nothing.
    Also did the delete the /com.apple.windowserver.plist file... nothing seems to work.  I can still charge the laptop from the display, but plugging in the thunderbolt cable does nothing at all.
    Pretty ****** off, this display is one week old and it suddenly dies?
    I have another display (dell) which works fine from either thunderbolt port from the mac.
    Any thoughts?  Is it the MBP or the display?
    Software on MBP is Maviricks 10.9.2

    So i left the MBP shutdown and the display unplugged from power overnight.
    Connected it up this morning and nothing happened... left it connected and after about 10 minutes the display magically came to life out of no where...
    Seems a bit dodgy!

  • Several applications suddenly not working properly at once

    Hi,
    I've run into some quite big problems with my 2009 13" MBP (8gb ram, 2.26 GHz).
    Today I noticed Safari wouldn't connect to websites that used the HTTPS protocol; I would just get a screen saying "Safari can't create a secure connection...." or something like that. Normal websites work fine. Then I noticed the iTunes store didn't work (probably because of the same problem that's causing secure websites not to work)
    But then it gets weird: iTunes also gives me several error messages about it not being able to save the library file (error code -50 if I remember correctly). And while this is all happening Disk Utility won't open either, it just bounces on the dock.
    These are the problems I've run into at the moment, but I have a feeling more applications won't work either.
    The weird thing is all of the problems start acting up at the exact same time, without any particular trigger that I've noticed.
    When I restart my Mac everything goes back to normal: I can visit secure websites, I can open Disk Utility and fix permissions etc etc. But after half an hour or so the same problems come back.
    I've tried to repair Disk Permissions, reset Safari and restarted the MBP several times, but nothing works. I haven't done anything out of the ordinary with the MBP except for installing a Java update a few days ago. I thought that might be the cause and deleted Java completely, but still no luck; the same problems still persist.
    I couldn't find any similar problems on Google, and I really need help. Safari not visiting secure websites is a real pain, since Facebook, Google etc etc all use https.
    -Thomas

    I could finally get Siri to recognize my apps and launch them again with the following couple of troubleshooting activities.
    Step 1.  go to Settings -> general -> siri -> disable Siri.  Then shut phone down and after restart re enable Siri.
    Step 2.  go to Settings  general -> reset -> reset network settings.
    Step 1 didn't work for me but it still a good troubleshooting activity and may solve other Siri related problems.
    as far as step 2 goes,  as soon as i reset the network settings on my phone, SIRI started working properly again. I am glad it worked and didn't have to restore my phone or do some more complex tasks.
    Hope this helps some one else.

  • 30 pin lightning converter suddenly not working properly in my car

    I have a Hyundai Veracruz that has the Hyundai cord that you plug into your phone and can play music/podcasts through the speakers while charging the phone.  Of course, when I traded in my iphone 4s for the 5s a few weeks back, I had the problem that the Hyundai cord was compatible with the 30 pin plug.  I ended up getting the lighning to 30 pin adapter (not the one with the cord, the regular little one.  I tried the corded lighting to 30 pin adapter first because of the issue with the regular lightning to 30 pin adapter not working if an iphone is in its case, but that product didn't work at all).  Anyway, it had been working totally fine-- recognizing the iphone as soon as I plugged it in, playing my music through the speakers, charging it, allowing me to use the controls on my steering wheel to skip songs if I wanted-- until this morning. When I plugged it in this morning, my radio didn't turn on automatically like it always has before.  Instead, when I turned it on manually and went to the auxilary mode it just says connected instead of ipod detected or whatever it used to say.  The good news is that it still plays through the speakers and charges, but I can't use the controls on the steering wheel and clearly something is wrong.  Any ideas?

    Hello there, jenniferps.
    The following Knowledge Base article reviews some great information about troubleshooting car stereo connections:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Motion 3 suddenly not working properly

    I have Motion 3 on a Mac Pro, and everything has been running JUST FINE until today.
    When I booted up Motion today, I noticed problems:
    1. The Utility window won't open
    2. I cannot add any Behaviors. When I hit the Behavior button, absolutely nothing happens
    3. I cannot add any Filters. When I hit the Filter button, absolutely nothing happens
    4. When I try to open the app to a new project, no new project is automatically created
    Other parts of the app seem to work fine. When I hit the button to add a new camera or bring up the HUD or something similar, it does that just fine. Its just those 4 things it won't do.
    One thing I did try doing was drag the Motion app to the trash and used Time Machine to retrieve the app from a few days ago (when it was working properly), but that doesn't help at all.

    http://www.applemotion.net/page15/page15.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
    <post edited by host>

  • My Kid dropped the iPad and the display is not working properly now.

    My kid dropped the ipad from about 3 ft and now the display is damaged, It is visible though but I can see rainbow colours and not the true ones.

    You can try slapping it: https://discussions.apple.com/thread/3970501?start=0&tstart=0
    Look for the post from mezorba.

  • Sharing suddenly not working properly

    Hi,
    I have been sharing itunes on my imac with both an iphone 4 & ipad 2 for ages, all going smoothly.
    Suddenly, about a month ago, both devices started to show only a handful of the artists and albums
    whilst the actual songs individually are all shared. So on the song tab, all 4179 songs are listed, but
    only 4 artists in the artist tab, and 75 albums in the album tab.
    Have tried closing/re-starting, home sharing on/off etc. but nothing works.
    The only non standard thing in my set up is that I have all the itunes media stored on an external drive.
    Dont think this can be the issue though, as its been set up that way for about a year with no issues.
    Would appreciate any ideas out there as to what is going on, and even how to fix.
    Thanks.
    My Specs:
    Quite old white plastic imac
    2.16 GHz Core 2
    1 GB 667 MHz DDR2 SDRAM
    250 GB - 75 used
    iTunes 10.7 (21)
    iphone 4
    ipad 2
    External Drive - Samsung Story - 1 TB - 380 GB used
    Format: Mac OS Extended (Journaled)

    FYI - I spoke to Apple support earlier and this is still not an acknowledged issue. Ergo, no one is looking into it.
    They have 'offered' to call me back when at home to go over my setup that was working fine in IOS5 but not IOS6 as the setup MUST be the issue. Not sure if I made things worse by pointing out that I'm and IT consultant and have worked with Apple systems for more years than I'd care to admit to.....
    The support tech I spoke said that her home sharing works fine. Hmmmmm.
    I'd suggest that EVERYONE puts in for a support callback (you can go through the iPad option and chose the 'I should get an exception for updating to ios6' option) and get them working.

  • Print Booklet suddenly not working properly

    I am working with InDesign CS3 in OS X 10.5. Up until this week, the Print Booklet function always worked fine for me (I only use it for generating PDFs with printer spreads). Now, however, files that printed properly in the past are generating PDFs of the wrong page size and orientation, and sometimes with the wrong scaling as well. The previews in Print Booklet still look fine, but the PDFs generated are not.
    One thing that stands out in particular is that, in the past, I could take care of all the settings in the Print Settings dialogue box - printer, page size, orientation, etc. Now, if I want the right page size, I have to go into the Page Setup box and choose the page size from there. If I am dealing with an uncommon page size (which can easily be set in the Print Settings box), the Page Setup box does not have that option (or it requires establishing a new custom page size). Furthermore, even when I can get the right page size, the page orientation in the resulting PDF is wrong and the pages need to be rotated, where they didn't before.
    It seems like the problem may have something to do with InDesign's communication with the Adobe PDF printer. This same week, I found that the software for my normal paper printer could not communicate with the printer, and I had to reinstall the printer driver, which took care of the problem. Maybe there is something similar I need to do here, with regards to the Adobe PDF printer driver? Or, perhaps there is a system file that might be missing or needs to be deleted and replaced? Please help - thanks!

    You updated to 10.5.5 didn't you? This is a problem with a CUPS file which has been discussed on the forums. Basically replacing the 10.5.5 version with one from 10.5.4 will fix the problem. See also this
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb406381&sliceId=2

  • Why are videos taken with a 4S suddenly not working properly when sent to non iphone users since the update?

    Suddenly non I-Phone users cannot view videos anymore, they can hear the sound, but no audio.  Iphone users are having issues viewing the videos too.  This all started with the 6.0 update.  Please fix it or tell me how to restore my phone back to the previous update, it is quite annoying.

    Hello VintageShaay,
    It sounds like you are getting some audio issues with the included Ear Buds when they are plugged in. I wanted to recommend these troublehsooting steps from the article named:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/ts2634
    3. Disconnect and Restart
    Disconnect the accessory and turn it off, if possible. Restart iPhone, iPod touch, or iPad by turning it off and then back on. When the Home screen reappears, reconnect the accessory.
    4. Isolate
    Isolate the issue to the accessory, if possible. Or, if available, try to reproduce the issue with another identical or similar accessory.
    Examples:
    If there is static coming from the left audio channel when using headphones, try connecting the headphones to a stereo, or try connecting a different set of headphones to the device.
    If the device is not syncing when connected to the dock, try connecting it directly to the computer using the Dock Connector to USB Cable, or try another USB port.
    6. Restore iPhone, iPad, or iPod touch
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Also if that does not resolve the issue, try the steps from the following article:
    Apple EarPods: Low or muffled sound
    http://support.apple.com/kb/TS4395
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Ipad music search not working properly after updating to iOS 6.1

    I just updated my 3rd generation ipad to iOS 6.1 and search in music app doesn't work now.i search for some song and only a few songs show up, whereas I can find the songs, manually. Even the spotlight search doesn't show all the songs.
    I have tried restoring to factory settings and then re-syncing with iTunes... But no help..
    I think there are only a few songs that show up in the search everytime..
    HELP!!!

    This is happening to my iPad Mini too, unfortunately. The best thing to do is to wait for the next update, which might come soon. But, you might want to go to your local Apple store and ask if they can do anything about it. Hope this helps
    <Link Edited By Host>

Maybe you are looking for