Ipad does not start. logo appears but goes off after some time.

I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.

Similar Messages

Oracle 10G Db Starts-up After Server Reboot, BUT Goes DOWN After Some Time

Hi All,
I am really puzzled over this one. I have couple of servers running DB on them and I have used scripts to auto-enable them when server(s) reboot.
But there is one server where I see this funny behavior.
The DB comes-up after server reboot.
I can verify that in the startup logs and some more logs that I created.
I can see that LISTENER is able to communicate also.
But after a while, the DB shuts-down....!!
I have checked all the places I could. I have also tried to see the difference between this server and others (I did not install this one), but can not see any difference.
Is there anyway to find out (log) what is shutting down the DB??
Any help will be much appreciated as I am at my wits end.
Following is snap-shot from my logs:
Fri Mar 16 20:42:29 EDT 2007
Running dbstart.
Done with starting all, let's check status...
Fri Mar 16 20:42:42 EDT 2007
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 20:42:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date 16-MAR-2007 00:46:56
Uptime 0 days 19 hr. 55 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/product/10.2.0/Db_1/network/admin/listener.ora
Listener Log File /oracle/product/10.2.0/Db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.103.253.50)(PORT=1521)))
Services Summary...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
Current Status:
# date
Fri Mar 16 21:30:40 EDT 2007
# su - oracle -c "lsnrctl status"
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:30:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.103.253.50)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refused

I was just looking at that.. Thanks for the tip.
Following is what I see. But not sure what does it tell me?? Please help......
From alert_orcl.log:
<snip>
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Mar 16 20:42:41 2007
Errors in file /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Fri Mar 16 20:42:42 2007
Completed: ALTER DATABASE OPEN
From /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
# cat /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
/oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
ORACLE_HOME = /oracle/product/10.2.0/Db_1
System name: SunOS
Node name: gcars0j6
Release: 5.10
Version: Generic_118833-24
Machine: sun4u
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 7700, image: oracle@gcars0j6 (TNS V1-V3)
*** SERVICE NAME:() 2007-03-16 20:42:37.548
*** SESSION ID:(159.3) 2007-03-16 20:42:37.548
Thread 1 checkpoint: logseq 255, block 2, scn 8602014
cache-low rba: logseq 255, block 3
on-disk rba: logseq 255, block 767, scn 8602399
start recovery at logseq 255, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 382Kb in 0.16s => 2.33 Mb/sec
Total physical reads: 4096Kb
Longest record: 3Kb, moves: 0/1066 (0%)
Change moves: 1/8 (12%), moved: 0Mb
Longest LWN: 308Kb, moves: 0/29 (0%), moved: 0Mb
Last redo scn: 0x0000.0083431e (8602398)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1925/2083 = 0.9
*** 2007-03-16 20:42:37.702
KCRA: start recovery claims for 149 data blocks
*** 2007-03-16 20:42:37.705
KCRA: blocks processed = 149/149, claimed = 149, eliminated = 0
*** 2007-03-16 20:42:37.706
Recovery of Online Redo Log: Thread 1 Group 2 Seq 255 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 2054/2074 = 1.0
Error in executing triggers on database startup
*** 2007-03-16 20:42:41.963
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15

TS3274 my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml

When i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me!i love my ipad sooo much.....!!!

when i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me! i love my ipad sooo much.....!!!

Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that does not help, you may have to restore your iPad.
iTunes: Backing up, updating and restoring iOS software.
If that doesn't work - You will have to use recovery mode
iPad: Unable to update or restore

My iPad does not start. What can be the problem

My iPad does not start. What can be the problem

Does anything happens when you try to switch it on ? If not, then assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

HT201210 While restoring it shows unknown error and exits. Now the ipad does not starts

I tried updating OS from 4.3.1 to 6.1
After downloading it shows preapering for restore
then it quits saying Unknown error
Now the ipad does not starts.
It show only an Apple sign and a status bar.
Noting happens when i press power button
What to do??

Sounds like you need t orestore the iPad with iTunes: http://support.apple.com/kb/ht1414

Ipad does not start

Dear Sir
I updated my itunes while my ipad was connected to the desktop. Now my Ipad does not start. I get a screen with the icons for CD under it written iTunes and arrow; and connection cable?
Please help me on the same.
Thanks

Restore help here. iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

TS3274 iPad does not start after the latest software update

After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.

If the reset doesn't work, force iPad into recovery mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

My mac book pro does not start properly. It goes past logo then grey screen I cannot access my

MMy MacBook pro will not start up. It goes past the apple logo then only a grey screen, sometimes a blue one with vertical stripes. I have tried starting from a disc also by using different keys, but with the same result. At one point i heard three beeps then a pause repeated. Please help.

See if you can run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note an error free AHT is not definitive.
If addition to the possibility of a RAM problem, the vertical stripes on the blue screen is not a good sign.
Ciao.

LaunchDaemon does not start at boot, but manually

Hi all
I have a LaunchDaemon entry for apache that does not start at system boot.
It contains the following keys that might affect the behaviour.
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
I can manually load the script using
sudo launchctl load /LibraryLaunchDaemomns/org.macports.svn.plist
Maybe I did not fully understand the LaunchDaemon concept. My program is
a wrapper that will start svnserve as a standalone server.
As I mentioned earlier it works fine manually, both "load" and "unload" successfully start and stop the service.
I'd appreciate any comments
Thanks a lot

Good evening
I want to startup my SVN service on a local RAID volume, but need to wait
until it is mounted. To do so I added the following to my daemons plist:
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<string>/Volumes/RAID</string>
</dict>
Maybe this is useful to someone in this forum.
Cheers

HT2731 My iPad does not show in iTunes but my iPod does why is this?

My iPad does not show in my iTunes but my iPod does. I get a message saying there is a error and a long number anyone help. Thanks

It may have something to do with a conflict with any antivirus or security software that you may be running. I don't know if you've read this, but here is Apple's support article for Windows. You say you keep fixing the problem - I assume you mean by reinstalling iTunes?
http://support.apple.com/kb/TS1538

Iphone 4 does not start, logo apple stays on screen

Help! My iphone 4 does not start.
The epple logo stays on the screen.
It seems like the setup keeps repeating.

If you haven't tried, Reset the phone by pressing the power and home buttons at the same time until the phone turns off. With itunes open try turning the phone back on if it didn't by itself. Itunes should ask you then to restore the phone.

PC does not start when pressing the power button, After that starts automatically like a ghost!

I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
Again when i shutdown and leave it for sometime, and still the problem is unsolved.
Please Help
This question was solved.
View Solution.

he figured out you dont just shut the lid and walk away, you use Windows shutdown
click Kudos to say thanks if I helped

Sun One Web Server connection pool goes stale after some time

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

Ipad does not start. logo appears but goes off after some time.

Similar Messages

Maybe you are looking for