IPad doesn't boot!! Apple logo freeze!!

Hello,
I've received one iPad that has been used by one of my Staff Directors. Now this iPad is going to be used by another person, so like ever I've reseted all the content (data, configuration, etc), but now the iPad doesn't boot and it is all the time showing the apple logo (it seems that the reset was fine, at least the process bar arrived to completed it and the iPad rebooted itself).
My Macbook PRO doesn't recognize the iPad when I am connecting it by USB cable, I've tried to hard reset as well with the same result: iPad is freeze booting with the apple logo.
So I can't connect the iPad to my Mac, so my iTunes can't recover the iPad, with the hard reset I obtain the same result...
What can I do? Could you help me, please?
Thanks in advance,
Best regards

First try to do a reboot, hold down sleep button until you see the slide to turn off screen. Do that, the hold down sleep button until you see apple logo pops up. If that does not work, then...
Google "put iPad in recovery mode". This should allow you to connect it to iTunes, which should ask if you want to restore your iPad. After that, you may be asked if you want to restore from back up. Say NO, since you want a clean slate.

Similar Messages

  • My iPad is locked on Apple logo. Already made a restore still have only Apple logo. Any ideas?

    My iPad is locked on Apple logo. Already made a restore still have only Apple logo. Any ideas?

    Try a Restore but force the iPad into Recovery Mode first.
    Doing that involves restarting the iPad, holding the Home Button, and connecting it to iTunes.  Holding the Home Button is the trick.  Here's an article explaining how to do it.
    http://support.apple.com/kb/HT1808
    If Force Restarting and Force Restoring doesn't work, it may be time to look up warranty information.
    Good Luck.

  • My ipad just appeared the apple logo

    My ipad just appeared the apple logo when power on and repeated again and again. I can not restore using itunes, what can i do now?
    My ipad is on 4.3.5

    I suppose, if you had no data on it, you could try the procedure for putting it in recovery mode and seeing if it would work subsequent to that...I'd run through the troublsehooting things in "cant connect to iTunes"
    http://support.apple.com/kb/ts1538 ( be sure your not using USB hub)
    and then if that doesn't work, and you aren't worried about data
    http://osxdaily.com/2011/01/16/forgot-iphone-passcode-how-to-reset/
    if those don't work, a trip to the Apple store would be in order...

  • My mini ipad is stuck at apple logo its ios 7.0.4 ive tried to restore it 2 times but its kept stuck what should i do now ? I became so afraid

    My mini ipad is stuck at apple logo its ios 7.0.4 ive tried to restore it 2 times but its kept stuck what should i do now ? I became so afraid
    Ive hold the two buttoms and it went to recovery mood and then i did restore but its again stuck

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtmlhttp://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

    When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes.  Then, the ipad will start up properly.

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My ipad froze on the apple logo screen after installing ios8  what do i dd?

    my ipad froze in the apple logo restart screen when I tried to install ios8.  it wont do anything.  please help!

    Try a reset.  Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT4623 Itunes is restoring the software on this Ipad. But nothing done. Always "Waiting for Ipad". On Ipad, only is there Apple logo.

    Itunes is restoring the software on this Ipad.
    But nothing done.
    Always "Waiting for Ipad".
    On my Ipad, only is there Apple logo.
    What do I do now?

    How long has it been displaying the Apple logo? Does it have a progress bar underneath?
    If you feel like it's been that way for too long, try putting the iPad in Recovery Mode:
    Leave it plugged into the computer. Hold the home and power buttons at the same time until the screen goes black and the Apple logo reappears. At that point, release the power button but continue holding the home button until iTunes on your computer says "iTunes has detected a device in Recovery Mode." Then click "Restore" in iTunes.

  • Connected ipad to pc, only apple logo appears, will not even go on or off

    connected ipad to pc, only apple logo appears, now it won't even turn on or off

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipad mini cycles from apple logo to start screen and wont stop

    Ipad mini cycles from apple logo to start screen and wont stop. Will not shutdown. Cycles every 5-8 seconds. Thanks!

    I'm having the same problem.  Since it's the same problem, I thought I'd pigtail on this thread, rather than clutter up the forum with a duplicate.  I can start a new thread if this is not appropriate.
    I have tried a reset, using the sleep/wake and home buttons, with no success.  I have also restored to factory settings, then restored to backup.  It's still rebooting itself.
    iPad Mini wifi (not Retina).  iOS 7.1.1.
    This problem started today.  I updated to 7.1.1 soon after the update was released.

  • My ipad is struck at apple logo during restore and isnt starting

    my IPAD was working fine & saw my IPAD after charging it, the screen was balck out later when i connected it to itunes...my ipad was recognized & displayed a msg...IPAD IN RECOVERY MODE & NEED TO BE RESTORED...during the restore process my IPAd was strucked at apple logo & isnt starting now

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT4097 my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do

    my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do

    Read
    http://support.apple.com/kb/ht1808

  • My iPad socket jack doesn't have Apple logo

    I have had both iPhone and iPad but unfortunately I noticed that both connecting jack are different because one jack have had Apple logo and my iPad jack doesn't have logo ,How could i trust made by Apple?

    Not all Apple headphones have the Apple logo on the jack.

  • Apple logo freeze

    have an apple iphone 3GS. The phone freezes on the IOS bootup ( apple logo remains on constantly)
    When plugged into a computer with the latest version of iTunes, the computers does not recognize the Phone.
    iTunes will recognize other iphone that do not have this problem. Turning the phone off, then plugging it into the computer
    does not solve the problem because the phone starts up automatically, then freezes on the boot up (Apple Logo).
    Doesn t appear to be a power problem, as the phone was charged, and the screen can stay on the Apple logo for more than 30 min.
    Any suggestions??
    Pt

    There isn't a lot you can do from this point and you may have tried it all. I'll run through a quick list and if none of it works you'll want to see about backing up your data and then doing an erase and install. Here's the list:
    1. Disconnect all peripheral devices (including things like ethernet cables), except for the Apple keyboard and mouse, and display (if it's not a built in). Does it work? If so then it may be some conflict with the one of the devices that were connected. Try them all one by one and see if the issue repeats itself when one is connected.
    2. Remove any extra RAM that may be installed and try running it with different combinations of RAM (if you have more than one RAM stick). If you find it only happens when a certain RAM stick is installed, then replace that RAM stick.
    3. Boot the install disk and run disk utility. You said you've done this but check out this article in case you missed a step or something. It never hurts to double-check.
    4. Reset your PMU. I think this is the article for your iMac. If not search the Apple Support pages for reset PMU.
    That's about all I can think of that may solve the issue. If you do need to do an erase and install then start up the computer while holding down the Option key. This takes you to the Startup Manager. If you see your hard drive in here then you should be able to use Target Disk Mode to back up your computer. If not then you'll probably want to take it in and have someone do it for you.
    And here's the instructions for an Erase and Install.

  • Ipad is stuck on apple logo and Restore didn't help

    Hi
    My Ipad 2 has been stuck on the apple logo for a few days!
    It was working fine except that safari wouldn't open (although i could use the internet via Chrome)
    My husband took it to an apple Genuis Bar (Westfield) and they got Safari to work.
    We switched off the iPad and then, the next day, when we switched it on (fully charged) it got stuck on the apple logo.
    There is also the start of a 'time bar' below the apple logo, but it doesn't advance at all.
    I have tried to restore the iPad twice from my pc (linking to the pc with the home button pushed down) and it has done a full restore (from my last pc back up of April)
    But it goes back to the stuck apple logo again!
    Please help! I am away and desperate to get it to work!
    Many thanks

    There really isn't anything else to try if restoring didn't help. I don't think this will work, but since you are desperate and restoring didn't work, reboot the iPad. You have nothing to lose.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT4623 My ipad has a constant apple logo on it and will not turn on?

    My ipad will not come on...It has a constant apple logo on it.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for

  • Multiple logins - can they access the same iTunes library?

    I have multiple logins on my Mac with Leopard. Our families iTunes library resides on my account. I set up separate accounts for them to protect my documents and such. However, when they launch iTunes, the library is blank. Can I point them to the li

  • Raising Exceptions in XSLT mapping.?

    Hi, When there is an mapping exception, in UDF, i raise an exception... Similar is the case with Java & ABAP mappings. Now, How do i raise mapping exceptions in XSLT mapping (Java & ABAP)..? --DJ

  • How to use the J_1B_NF_VALUE_DETERMINATION fn.module

    dear all, can anybody help me out in using  the function module. J_1B_NF_VALUE_DETERMINATION : Read values from NF returned combined with J_1B_NF_DOCUMENT_READ using. to determine the NFTOT value. regs, Raja

  • Using FaceTime in a Customer Service Center

    My company has an idea to utilize Face Time in our customer service center utilizing the iPad 2.  Is it possible to have a single number/id dedicated to Face Time that allows for mulitple conversations at one time?  If so, how can this be set up?

  • DVD will not eject

    A DVD in the slot-loading drive will not eject. My iBook reads the disk as it appears on my desktop and I can play the DVD. But as soon as I hit the eject key (F12), it makes a weird sound, like it's trying to eject, but the DVD will not eject. Can s