IPad doesn't recognize MacBook on network
Good morning. I use my iPad through Airport as a Verizon Wireless hotspot to use my MacBook Pro to work online. This morning, howver, the iPad doesn't show up in the network list (although other, unassociated networks do) even when it's plugged directly into the MacBook with the USB cord. I have been able to connect with Bluetooth, but I really prefer using the Airport because the iPad drains the battery so rapidly unless it's plugged into an a/c outlet. (Story for another day.)
I've rebooted everything several times, but no joy.
I have a support request into Verizon as well, but I get into a panic when I can't work, and the iPad's battery is draining rapidly.
Suggestions?
The Verizon Wireless rep replied quickly and connected me on a phone conference with their Apple staff. I was embarrassed that I hadn't figured this out for myself, not having spent enough time exploring the iPad and not being brave enough to push a "start from scratch" button. It required only going to "reset" under "General" and resetting network settings. Presto.
Similar Messages
-
HT4356 iPad doesn't recognize ePrinter.
My iPad doesn't recognize my printer. It did until I upgraded the printer (HP 5510) to recognize Windows8 on my computer. Any suggestions?
Good Morning sylvia261,
The resource below explains all of the steps to take when you change your Apple ID. You may need to restart your iPad; sign out of iCloud and iTunes in the Settings app and then sign in with your revised Apple ID.
Change your Apple ID - Apple Support
http://support.apple.com/en-us/HT202667
Change your Apple ID
Learn how to change the email address that you use as your Apple ID.
In most cases, your Apple ID is also the primary email address of your Apple ID account. You can change your Apple ID to any other email address you control, as long as it's not already in use as an Apple ID. If your email address ends with @icloud.com, @me.com, or @mac.com, it's already an Apple ID.
Use these steps to reset your Apple ID:
Sign out of iCloud, the iTunes Store, App Store, FaceTime, Find My Friends, Find My iPhone, and iMessage on each device that uses your current Apple ID for these services.
Go to My Apple ID.
Select Manage your Apple ID and sign in. Forgot your password?
Select Edit next to Apple ID and Primary Email Address.
Enter the email address that you want to use as your Apple ID, then select Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now. Didn't receive the email?
When the My Apple ID page opens, sign in with your new Apple ID email address and password. When you see a message that verification is complete, you can start using your updated Apple ID.
Update the features and services that you use with Apple ID, so that each one is using your updated Apple ID.
If you need to change the Apple ID that's signed in to your iOS device, use these steps to sign out, then back in with a different Apple ID.
Last Modified: Dec 11, 2014
Take care,
Judy -
My ipad doesn't recognize my email account. When I delete the account and reenter it, it still doesn't work. What should I do?
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
More Info Here > http://www.apple.com/support/ipad/mail/ -
IPad doesn't recognize junk mail
iPad does not recognize and automatically sort my junk mail?
BASDawg,
Please remember that this forum is by and for users. Apple isn't here... if you wish your feelings to be heard by Apple, send them some feedback:
http://www.apple.com/feedback/ -
I bought apps from the Apps Store on my iPad2 for 2 or 3 days and then it suddenly began refusing to download even free apps. The error message states that my iPad2 doesn't recognize PayPal. I tried setting up a credit card as my iTunes payment option (PayPal wasn't listed as an option) and then I canceled my iTunes subscription with PayPal- still nothing. Now I'm stuck. Any ideas? I'd really prefer the PayPal option if possible. Thanks.
LaJoyceI'm afraid that you'll probably have to use either a credit card or one of Apple's approved payment methods. Please click here for more information. Hope this helps
-
My iPad doesn't recognize my iCloud account.
ITunes Match doesn't recognize my account.
Welcome to the Apple Community.
Is your contry?Region set correctly on your device (settings > iTunes & App Store > ID). -
ArchLinux Installation disk doesn't recognize Macbook Air SSD[SOLVED]
I want to install ArchLinux on my new MacBook Air (dual boot), I made a dd of the installation iso to a usb disk. The usb disk can boot and run, but it cannot recognize the hard drive(SSD) of Macbook air.
There are three disk files in dev: /dev/sda /dev/sda1 and /dev/sdb
/dev/sda is the usb disk, /dev/sdb cannot be opened by parted and cannnot be mounted (it reports "no medium found") and I believe it is the sd card reader.
What can I do?
dmesg shows the following errors:
ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: COMRESET failed (errno=-16)
ata1: reset failed, giving up
and lots of
applesmc: wait status failed: 5 != 0
applesmc: failed to init the device
this is whole dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006f000000 (usable)
BIOS-e820: 000000006f000000 - 000000007f000000 (reserved)
BIOS-e820: 000000007f000000 - 000000007f719000 (usable)
BIOS-e820: 000000007f719000 - 000000007f939000 (ACPI NVS)
BIOS-e820: 000000007f939000 - 000000007fef9000 (ACPI data)
BIOS-e820: 000000007fef9000 - 000000007feff000 (reserved)
BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI data)
BIOS-e820: 0000000093200000 - 0000000093201000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
last_pfn = 0x7f719 max_arch_pfn = 0x100000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 080000000 mask F80000000 uncachable
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000008f000 (usable)
modified: 000000000008f000 - 0000000000090000 (reserved)
modified: 0000000000090000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000006f000000 (usable)
modified: 000000006f000000 - 000000007f000000 (reserved)
modified: 000000007f000000 - 000000007f719000 (usable)
modified: 000000007f719000 - 000000007f939000 (ACPI NVS)
modified: 000000007f939000 - 000000007fef9000 (ACPI data)
modified: 000000007fef9000 - 000000007feff000 (reserved)
modified: 000000007feff000 - 000000007ff00000 (ACPI data)
modified: 0000000093200000 - 0000000093201000 (reserved)
modified: 00000000f0000000 - 00000000f4000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffc00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 6e7e5000 - 6efde026
Allocated new RAMDISK: 00100000 - 008f9026
Move RAMDISK from 000000006e7e5000 - 000000006efde025 to 00100000 - 008f9025
ACPI: RSDP 000fe020 00024 (v02 APPLE )
ACPI: XSDT 7f96a1c0 0008C (v01 APPLE Apple00 00000061 01000013)
ACPI: FACP 7f968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
ACPI: DSDT 7f95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
ACPI: FACS 7f71e000 00040
ACPI: HPET 7f967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 7f966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 7f965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ASF! 7f963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 7f962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 7f961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 7f957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
ACPI: SSDT 7f956000 000FC (v01 APPLE SDCard 00001000 INTL 20061109)
ACPI: SSDT 7f954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
ACPI: MCFG 7f964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 7f95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
ACPI: SSDT 7f959000 00074 (v01 SataRe SataSec 00001000 INTL 20061109)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
1151MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00016000 - 0001cf00
(10 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0001551000 - 00015571d5] BRK ==> [0001551000 - 00015571d5]
#5 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#6 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#7 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#8 [0000100000 - 00008f9026] NEW RAMDISK ==> [0000100000 - 00008f9026]
#9 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f719
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000010 -> 0x0000008f
0: 0x00000090 -> 0x0000009f
0: 0x00000100 -> 0x0006f000
0: 0x0007f000 -> 0x0007f719
On node 0 totalpages: 456361
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2303 pages used for memmap
HighMem zone: 226844 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 93201000 (gap: 93201000:5cdff000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34776 r0 d22568 u2097152
pcpu-alloc: s34776 r0 d22568 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452282
Kernel command line: initrd=/boot/i686/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/i686/vmlinuz26
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 10440180 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0007f719)
Memory: 1783248k/2088036k available (2895k kernel code, 41140k reserved, 1208k data, 408k init, 916588k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1858.186 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3717.22 BogoMIPS (lpj=6193953)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 0a
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (7435.67 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff]
pci 0000:00:03.2: reg 10: [io 0x0000-0x00ff]
pci 0000:00:03.2: reg 20: [io 0x2240-0x227f]
pci 0000:00:03.2: reg 24: [io 0x2200-0x223f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.4: reg 10: [mem 0x93200000-0x9327ffff]
pci 0000:00:04.0: reg 10: [mem 0x9328a000-0x9328afff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10: [mem 0x9328b100-0x9328b1ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: reg 10: [mem 0x93289000-0x93289fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:06.1: reg 10: [mem 0x9328b000-0x9328b0ff]
pci 0000:00:06.1: supports D1 D2
pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: reg 10: [mem 0x93280000-0x93283fff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f]
pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7]
pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297]
pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3]
pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f]
pci 0000:00:0a.0: reg 24: [mem 0x93284000-0x93285fff]
pci 0000:00:0b.0: reg 10: [mem 0x93288000-0x93288fff]
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
pci 0000:00:17.0: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0x93100000-0x93103fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:15.0: PCI bridge to [bus 01-01]
pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92ffffff]
pci 0000:02:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0x90000000-0x91ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
pci 0000:02:00.0: reg 30: [mem 0x93000000-0x9301ffff pref]
pci 0000:00:17.0: PCI bridge to [bus 02-02]
pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0063] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0065] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0080] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0480-0x04ff] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0580-0x05ff] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0295-0x0296] has been reserved
pci 0000:00:03.2: BAR 0: assigned [io 0x2000-0x20ff]
pci 0000:00:03.2: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff]
pci 0000:00:15.0: PCI bridge to [bus 01-01]
pci 0000:00:15.0: bridge window [io disabled]
pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
pci 0000:00:15.0: bridge window [mem pref disabled]
pci 0000:00:17.0: PCI bridge to [bus 02-02]
pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
pci 0000:00:15.0: power state changed by ACPI to D0
pci 0000:00:15.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 23
pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:17.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8164k freed
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1292314287.046:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1710
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:15.0: setting latency timer to 64
pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
SCSI subsystem initialized
ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0x9328b100
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z001] enabled at IRQ 21
ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:06.1: setting latency timer to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
ehci_hcd 0000:00:06.1: irq 21, io mem 0x9328b000
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 20, io mem 0x9328a000
libata version 3.00 loaded.
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
pata_acpi 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:0a.0: setting latency timer to 64
pata_acpi 0000:00:0a.0: PCI INT A disabled
ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 18, io mem 0x93289000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:0a.0: version 3.0
ahci 0000:00:0a.0: power state changed by ACPI to D0
ahci 0000:00:0a.0: power state changed by ACPI to D0
ahci 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:0a.0: irq 25 for MSI/MSI-X
ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl IDE mode
ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
ahci 0000:00:0a.0: setting latency timer to 64
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
usb 1-1: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
scsi1 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-6: new high speed USB device using ehci_hcd and address 5
usb 2-1: new high speed USB device using ehci_hcd and address 2
scsi2 : usb-storage 2-1:1.0
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb 3-3: new full speed USB device using ohci_hcd and address 2
usbcore: registered new interface driver hiddev
input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input1
generic-usb 0003:05AC:023F.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
generic-usb 0003:05AC:023F.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input2
generic-usb 0003:05AC:023F.0003: input,hidraw2: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-5: new full speed USB device using ohci_hcd and address 3
hub 3-5:1.0: USB hub found
hub 3-5:1.0: 3 ports detected
usb 3-5.1: new full speed USB device using ohci_hcd and address 4
input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input3
generic-usb 0003:05AC:820A.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
usb 3-5.2: new full speed USB device using ohci_hcd and address 5
input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input4
generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
usb 3-5.3: new full speed USB device using ohci_hcd and address 6
scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
ata1: link is slow to respond, please be patient (ready=0)
scsi 2:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
sd 1:0:0:0: [sda] 3905536 512-byte logical blocks: (1.99 GB/1.86 GiB)
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: COMRESET failed (errno=-16)
ata1: reset failed, giving up
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
eth0: register 'asix' at usb-0000:00:06.1-2, ASIX AX88772 USB 2.0 Ethernet, 58:55:ca:24:b3:52
usbcore: registered new interface driver asix
UDF-fs: Partition marked readonly; forcing readonly mount
aufs 2-standalone.tree-33-20100426
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs test_add:248:mount[967]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777
aufs test_add:248:mount[972]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777
udev: starting version 151
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: PC Speaker as /devices/platform/pcspkr/input/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
ACPI: SSDT 7f71dc98 001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 7f71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
Monitor-Mwait will be used to enter C-1 state
applesmc: Apple MacBook Air detected:
applesmc: - Model with accelerometer
applesmc: - Model with light sensors and backlight
applesmc: - Model with 15 temperature sensors
Monitor-Mwait will be used to enter C-2 state
Linux video capture interface: v2.00
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 7f71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
ACPI: SSDT 7f71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
ACPI: AC Adapter [ADP1] (on-line)
Switching to clocksource hpet
uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
ACPI: Battery Slot [BAT0] (battery present)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input11
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
applesmc: wait status failed: 5 != 0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:08.0: setting latency timer to 64
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: failed to init the device
applesmc: 1 fans found.
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
input: applesmc as /devices/platform/applesmc.768/input/input12
Registered led device: smc::kbd_backlight
applesmc: driver successfully loaded.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
this is lspci -vvv output
00:00.0 Host bridge: nVidia Corporation Device 0d60 (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.1 RAM memory: nVidia Corporation Device 0d68 (rev a1)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 RAM memory: nVidia Corporation Device 0d6d (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 RAM memory: nVidia Corporation Device 0d6e (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.2 RAM memory: nVidia Corporation Device 0d6f (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 RAM memory: nVidia Corporation Device 0d70 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 RAM memory: nVidia Corporation Device 0d71 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.1 RAM memory: nVidia Corporation Device 0d72 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.0 ISA bridge: nVidia Corporation Device 0d80 (rev a2)
Subsystem: Apple Computer Inc. Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 2100 [size=256]
00:03.1 RAM memory: nVidia Corporation Device 0d7b (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.2 SMBus: nVidia Corporation Device 0d79 (rev a1)
Subsystem: nVidia Corporation Device cb89
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 2000 [size=256]
Region 4: I/O ports at 2240 [size=64]
Region 5: I/O ports at 2200 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.3 RAM memory: nVidia Corporation Device 0d69 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.4 Co-processor: nVidia Corporation Device 0d7a (rev a1)
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 14
Region 0: Memory at 93200000 (32-bit, non-prefetchable) [size=512K]
00:04.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 9328a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:04.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at 9328b100 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:06.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 93289000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci_hcd
00:06.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at 9328b000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:08.0 Audio device: nVidia Corporation Device 0d94 (rev a2)
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 93280000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel
00:0a.0 IDE interface: nVidia Corporation Device 0d85 (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Apple Computer Inc. Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 2298 [size=8]
Region 1: I/O ports at 22a4 [size=4]
Region 2: I/O ports at 2290 [size=8]
Region 3: I/O ports at 22a0 [size=4]
Region 4: I/O ports at 2280 [size=16]
Region 5: Memory at 93284000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] SATA HBA v1.0 InCfgSpace
Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0300c Data: 4181
Kernel driver in use: ahci
00:0b.0 RAM memory: nVidia Corporation Device 0d75 (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 93288000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
00:15.0 PCI bridge: nVidia Corporation Device 0d9b (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 93100000-931fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0300c Data: 4151
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg+
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:17.0 PCI bridge: nVidia Corporation Device 0d76 (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 92000000-930fffff
Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
01:00.0 Network controller: Broadcom Corporation Device 4353 (rev 01)
Subsystem: Apple Computer Inc. Device 00d1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 14
Region 0: Memory at 93100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 1c-11-ca-ff-ff-f5-58-55
Capabilities: [16c v1] Power Budgeting <?>
02:00.0 VGA compatible controller: nVidia Corporation Device 08a3 (rev a2) (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device 00d3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
Expansion ROM at 93000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Vendor Specific Information: Len=14 <?>
Last edited by steamedfish (2010-12-14 18:13:28)Try booting the fallback kernel, there is a problem with the AHCI driver concerning new Macbooks. When you've booted, add ata_generic to the modules in /etc/mkinitcpio.conf and rebuild the initrd with mkinitcpio -p kernel26.
-
Mac mini doesn't recognize my wifi network
MY new Mac Mini won't show my wifi network on the list but recognises all of my neighbors' networks. The router is right next to it. Once it connected and worked normally but as soon as I switched off the computer and turned it back on the next day, it would recognize the network again. Help!
Power off and then back on your router.
Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
If purchased with the last 90 ays call Apple since yo have free 90 day telephone support
Complimentary Support (USA) -
IPad doesn't recognize wifi connection
I am connected to my home wifi but ipad2 says not connected to the internet. If I switch to cellular data I can connect. I tried resetting my network settings but no change.
You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
My iPad doesn't recognize my laptop
My laptop recognizes my iPad, but My iPad wont charge when connected to my laptop, and I cant sync my iTunes on my laptop with my iTunes on my iPad. I turn my iPad off and restarted it like one of the other forums said about charging it, but it didnt work. How can I fix this?
There have been some reports that iTunes may not be compatible with Windows 8. If so, I assume that Apple is working on a fix. That said, look at this link. http://www.technipages.com/itunes-fix-iphone-or-ipod-not-detected-in-windows-8.h tml
Cheers, Tom -
Macbook recognizes Iphone via bluetooth. Iphone doesn't recognize macbook?
My computer recognizes my iphone but does not connect saying it 'does not have the necessary services'. Both devices are set to discoverable. Iphone will not recognize any device.
3G iPhone updated to iOS4 connects as intended in 09 Nissan Rogue. After the update, car did not show in list of previously connected bluetooth devices. As soon as I put Nissan in discovery mode, 3G saw it and added it to list. iPhone automatically connects whenever I enter car (assuming bluetooth is turned on). Perhaps you might want to try pairing the phone and car again. If your car is listed on your phone as a bluetooth device, you may wish to delete and try again.
-
IPad doesn't recognize iTune password
The issue occur again when I tried to update my iPad with iOS 8. I thought upgrading bu connection to laptop would solve this but after completed it seems to get worst now cause I couldn't change my password or restore my device via iTune anymore. I hope this is just a temparary hick-up of apple and there is a solutions out there. Please guide me through this. Thank you!
I'm not that I understand what you are saying. What does the iTunes password mean or have to do with this problem anyway? If you are saying that the iPad will not accept your Apple ID password and you cannot activate it because of that issue, try resetting the password.
Apple ID: Changing your password -
So my iPad is not resetting but is nearly dead. USB ports won't be recognized and even 10 seconds of pushing start etc won't help. I'm in a really need of help. Who can help my Ipad to life again. Thanks very much in advance. Henk
hgtendam wrote:
So my iPad is not resetting but is nearly dead.
What do you mean - not resetting? It will not turn on? Is the battery low and need a charge?
USB ports won't be recognized and even 10 seconds of pushing start etc won't help.
iTunes is not recognizing the iPad when you plug it in to your computer? You tried holding the sleep and the home buttons down at the same time for about 10-15 seconds - or maybe even a little longer - until the Apple logo appeared? -
Hi...
Tap Settings > Store > Sign In
Type in the new password.
If you have problems, tap iForgot to reset the password the password one more time. -
When I subscribed to Match this morning iTunes used the account I set up ages ago. When I set up iCloud on the iPad it pushed me to the MobileMe account but now the iPad doesn't recognize the iTunes Match subscription but it does exist on the AppleTV since I set that up independently. Is there a way to Match MobileMe ID and iTunes ID so they know they go/come from the same place?
Until Apple allow us to merge Apple IDs, no.
But if you go to Settings / Store on the iPad and change the Apple ID there to the one you used for Match, everything should work. Essentially it means your iPad will use one ID for iCloud, and one for the iTunes store, but they're kept separate, so everything should be fine...
Maybe you are looking for
-
OK GUI BOXE'S Dissappear, flash behind iTunes. Ctrl+Alt+Del to quit
Recently upgraded to iTunes 7. Anytime an "OK" GUI Box is presented in iTunes and I click "OK", the GUI "OK" box Dissappears and flashes behind iTunes. iTunes then becomes unusable. There are no errors except for the annoying Windows beep. I have to
-
Hi all' I have a problem in one of my db schema. All of a sudden all views and triggers vanished and one of the tables is not allowing any ddl showing that resources are busy so lock could not be acquired . Instant help is needed. Thanks in advance
-
Need to replace cover for RAM, HDD, Wi-Fi. Where can I get it?
Hey all. I have a G505s, model 20255. When taking the bottom cover off (the cover that protects the RAM, hard drive, wifi, etc) I broke some clips because - being stupid - I didn't read the instructions first! IDIOT! Anyway, where can I buy a replace
-
Using Numbers, can I calculate the date that will be eg 45 days ahead of a given date?
Using Numbers, can I calculate the date that will be eg 45 days ahead of a given date?
-
Gettin error message on photoshop and acrobat error 148:3 This began after Microsoft used log-me-in to correct problems in Office 365 Now neither Adobe programs will open Any one know how to solve this, Adobe Chat could not assist me