Ipad doesn't stop rebooting

Hello,
Anyone can help me with an Ipad 3 issue: the error log says the "Boot faults" : rst vdd_under
It rebooted 30 times today. I'm depressed

iPhone, iPad or iPod touch: Not responding or does not turn on
If no success, try restoring:
iTunes: Restoring iOS software
No dice, try recovery mode:
iClarified - iPhone - How to Put an iPhone Into Recovery Mode
Still nothing, make an appointment with Apple Genius Bar
Apple Retail Store - Genius Bar

Similar Messages

HT1766 iPad touch screen stopped working. Can't scroll or select any apps. Can't reboot. Connect to PC via iTunes doesn't recognize the iPad.

The iPad touch screen suddenly stopped working. It's been fine, but stopped all of a sudden. Couldn't reboot since pressing the hibernate button also asked for a "swipe" but couldn't swipe since the screen isn;t sensing any touching. can't scroll main screen appas. Can't connect to iTunes, says not connected. Next stop Apple store unless someone has an idea.

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

TS3274 My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to?

My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to or what else can anyone suggest please......

If you have reset to Factory Default and it still doesn't work; bring it to an authorized Apple Sevice Center.

My ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

my ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

The first thing that I would try is a reset.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
IF that doesn't stop the rebooting, you should restore the iOS Software. Read this carefully and read to all the way through before proceeding.
Use iTunes to restore your iOS device to factory settings
At the very end of the article under "additional information" there is a link to recovery mode. You might need to use that if you cannot restore in the conventional manner.

IPad 3 has stopped printing to my AirPrint printer iPhone still prints

My iPad 3 has stopped printing to my AirPrint printer. My iPhone still prints things ok. It worked before and it shows the printer as available when I send to print and says it is contacting the printer then preparing then just nothing happens. Nothing has changed with my network and my partners iPad 3 still prints stuff fine. Help!

Reboot the iPad 3.
If it still doesn't work, reboot the router.

IPad doesn't charge all the time

Ipad doesn't charge all the time

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

My new at Christmas iPad air requires a reboot at least once a day sometimes more. Is this normal?

My new iPad air requires a reboot at least once a day, sometimes more . Is this normal?

That type of error could indicate a WiFi network problem. That type of error can usually be gotten around by simply turning off/on WiFi in the Control Panel or Settings. There may or may not be any problem with your iPad Air. It won't hurt to have it checked out. You could also test your iPad on some other WiFi networks to see if it has any problems there. If it doesn't you might want to take a closer look at your network.

IPad doesn't recognize MacBook on network

Good morning. I use my iPad through Airport as a Verizon Wireless hotspot to use my MacBook Pro to work online. This morning, howver, the iPad doesn't show up in the network list (although other, unassociated networks do) even when it's plugged directly into the MacBook with the USB cord. I have been able to connect with Bluetooth, but I really prefer using the Airport because the iPad drains the battery so rapidly unless it's plugged into an a/c outlet. (Story for another day.)
I've rebooted everything several times, but no joy.
I have a support request into Verizon as well, but I get into a panic when I can't work, and the iPad's battery is draining rapidly.
Suggestions?

The Verizon Wireless rep replied quickly and connected me on a phone conference with their Apple staff. I was embarrassed that I hadn't figured this out for myself, not having spent enough time exploring the iPad and not being brave enough to push a "start from scratch" button. It required only going to "reset" under "General" and resetting network settings. Presto.

My iPad has suddenly stopped receiving emails. I have tried every trick and it's still not working.

My iPad has suddenly stopped receiving emails from the mail app.
I've been looking through the forum for hours and tried every variation of deleting the account, re-adding it, rebooting my iPad etc. I've tried everything! And I still can't receive emails.
My drafts, sent emails and junk emails are all there but my inbox is empty and it's refusing to download the messages.
When I refresh it, "downloading 1 of 250" pops up for a second and then disappears and it just says it's updated yet nothing is there.
Please can someone help. This is incredibly annoying!!!
My mail provider is Yahoo and my wifi is working fine.

wysbf2 wrote:
Hi - did you get any resolution to this? I have exactly the same issue.
You tagged onto an older post. If you want an answer to your specific question, you need to create a new post. By creating a new post, you will receive emails when helpers post responses.
 Cheers, Tom

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly. Is there a fix/test.

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly.
What I get is a RED exclamation and "Not Delivered". It happens even if i resend it over and over.
I have made sure that the 3 devices all have the same settins in iMessage.
I have made sure to try doing it from the same network and from the cell provider network.
I have tried rebooting all three devices.
The only way to get it to work on my iphone and iPad is to dissable it in Mavericks on my MacBook Pro.
Is this a "feature" of the new OS?

Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Find my iphone/ipad doesn't work

Hello everyone...
I open this discussion because find my iphone/ipad doesn't locate it when it conected on wifi and with the location and find my iphone/ipad activated.
I have tried everything that you can imagine and what you can't thing for solve this problem... Deactivating and activating the switches for location and FMi, deleting the icloud account, using another icloud account, and even restoring the device and reinstalling it from zero... I don't have any other idea and I hope someone can help me on it.
Thanks for your time

It could be the router (if you are using wifi). First try rebooting it and testing.
It could be that your ISP hasn't associated a location with the router (this is needed for location to be determined). In this case there's nothing you can do. To test for this case, try FMi at a public wifi location (most of them have the routers properly identified). If it works at one such spot, then you'll know it's your router. If not, then I can't offer any more suggestions, as the list you give above pretty much covers the usual troubleshooting routines.
An iPhone shouldn't have such problems, since it has GPS onboard. Likewise a 3G iPad has GPS (the wifi only versions do not).

The PSE 10 process doesn't stop after closing the application. Why??

On Windows 7, the PSE 10 process doesn't stop when closing the application, therefore the PSE 10 app. will not restart once it is closed. The user must stop the process from task manager or reboot before PSE 10 can be restarted on a Windows 7 machine. The forum suggestion to double-click the exe (instead of the shortcut) as a solution, obviously isn't a solution and can't work. There are no updates to PSE 10 and the only access to any support is through this forum. There have been complaints about this on blogs all over the Internet. Why can't Adobe come up with a fix/update or if they have where is it posted?

First of all, there is no difference between the files on the disk and those downloaded as the trial. The only difference is that one comes with a serial number and the other does not. You can put your serial number into the trial version and it will then be activated. The only way the disk would behave differently is if there is some physical flaw (scratches, warping, etc). Usually such damage will cause the installation to fail, it's pretty difficult for such damage to modify the files in such a way that they still install but behave differently.
If you are dropping a file on the shortcut and the Photoshop Elements Editor is opening but the file is not, there could be a few different things going on there. Check your shortcut properties first: does it go to PhotoshopElementsEditor.exe or Photoshop Elements 10.0.exe? If the former, then there are probably some missing support files. If the latter, this is the Welcome Screen, which has likely been configured to launch the Editor automatically. However, you would be sending the file to the Welcome Screen, which doesn't do anything with the file. It is not capable of passing the file off to the Editor, only capable of launching it.
Also, double-clicking a shortcut is generally the exact same thing as double-clicking the file the shortcut points to, but you can add modifiers to shortcuts to make them behave differently.

TS4006 I have an error on my ipad stating: "Server stopped responding"

I have an error on my IPad stating: "Server stopped responding'
However, I have full connection to wifi, I tried rebooting wifi, turning off wifi and turning back on -on I Pad, I tried turning on/off airplane mode, etc.
My email is working fine so I know I have internet connection to the IPad....
Does anyone have any advice?
Zenna

Tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.
Then restart the device.

TS3274 my ipad doesn't rotate correctly when I turn it. what do i do?

All of sudden my ipad doesn't rotate when I turn it no matter what buttons i push in settings. Has anyone else had this problem & have an answer?

Try rebooting the iPad and see if that helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

My ipad has suddenly stopped connecting to the internet. The settings have not been changed. Why is this?

My ipad has suddenly stopped connecting to the intenet via my home wifi system. The settings have notbeen changed. why is this?

The first thing to try is to power down your modem and router for about 30 seconds, then repowering by plugging them back in.
Also, if that doesn't work, on your iPad you can try going into settings/safari/clear history/clear data and cookies.

Ipad doesn't stop rebooting

Similar Messages

Maybe you are looking for