IPad doesn't work after latest update

Downloaded the very latest software update last night.  Now neither my iPhone 5 or my iPad with retina display will update apps, see network, etc.  Rebooted both, twice.  No change.  What should I do?
STOP THE PRESS!
Started working--
Thanks everyone. 
Message was edited by: SusanCanton

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Similar Messages

  • Sync doesn't work after latest update

    I've got PC suite 7.1.180.94 and Outlook 2010 (commercial set up with Exchange).  The latest PC suite update seems to have broken sync.  I click the "Synchonize" icon and absolutely nothing happens.
    I've tried a repair, remove-and-replace etc but no dice - any ideas?  Happy to do some diagnosing as I'm a software engineer.
    DON'T suggest Ovi, unless Nokia have added one-way sync - I don't want my employer's Contacts and Calendars on my phone!
    Thanks,
    Papadeltasierra

    Hi papadeltasierra, can you download Nokia Suite 3.8.30 from www.nokia.com/nokiasuite and try with that?
    Which phone do you have?
    Cheers, Samuli

  • My SuperDrive doesn't work after Lion update

    My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
    Thanks

    I too have had the problem since updating to Lion.  My superdrive isn't even recognized.  I have repaid hard disk permissions and also reset PRAM.  Sure wish I had a fix. 

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • Mail on my iPad 2 is no longer working after latest update. If I delete the account and reinstate it will I lose everything that was there before?

    Mail on my iPad 2 has stopped working since the latest update. The symbol is on the screen in its' usual place but it either opens briefly, just showing the blank framework for Mail before suddenly quitting, or all the App symbols disappear completelly from the screen. I'm not confident that i know what to do! If I delete the account and reinstate it will I lose everything that was there before? Looking at an earlier question along the same lines it doesn't appear that that would make a difference. If I reset the whole thing will I lose all my documents, photos etc.?
    i'd be extremely grateful for some clear guidance!

    (A) Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.
    (B) Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

  • Acrobat Pro Not Working after Latest Update to Snow Leopard

    After getting the latest update for Snow Leopard I get the following when Acrobat tries to boot:
    Process:         AdobeAcrobat [157]
    Path:            /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
    Identifier:      com.adobe.Acrobat.Pro
    Version:         9.0.0 (9.0.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [77]
    Date/Time:       2010-03-31 11:25:30.253 -0600
    OS Version:      Mac OS X 10.6.3 (10D573)
    There is more after this but the summary is that it doesn't boot. Is anyone having this problem also? And if so how did you fix it.? I have tried uninstalling and reinstalling Acrobat but with no success.
    Thanks in advance.
    David

    BBfolgart wrote:
    Hi Michael,
    Thanks for your reply. However how can you upgrade when the program won't boot? I tried downloading again from Adobe but the version that comes over is 9.0. Is there anyway to force a load? Or anyway for Adobe to push me 9.3.1?
    Regards,
    David
    First try removing preference  and or .plist files for Acrobat. Then when you get working try this tip below that might help when you update the application and it fails.
    I've come across this in these forums That may or may not solve the update issue for "some" people:
    <http://forums.adobe.com/message/2692924#2692924>
    see if you think. it helps.

  • Bluetooth headset no longer work after latest update

    I use a Plantronics Voyager Pro bluetooth headset for Skype calling and Ventrillo on my Macbook Pro. Since after the latest update, it no longer works. Both input and output doesn't work and the applications hang for about 30 seconds. I've tried re-pairing the device to no avail. Both applications work if I switch them to the built-in microphone.
    I also tried doing the same thing with a Plantronics 245 and I get the same issue.
    Both headset work with my phone.

    FIXED!!!!
    Steps to UNF*ing your Mac.
    1) Install an app called Pacifist
    2) Download the individual installer for the Magic Touch Update here: http://support.apple.com/kb/DL1066 DO NOT INSTALL THIS
    3) Load your OSX Install DVD
    4) Open the MagicTrackpadMultiTouchUpd1.0.dmg in Pacifist
    5) Open your OSX Installer DVD in Pacifist
    6) Look at the MagicTrackpadMultiTouchUpd1.0.dmg package in Pacifist to see exactly what it installed and where.
    7) Find these SAME EXACT FILES on the OSX Installer and reinstall them as root (e.g. using your admin password when asked)
    8) Repair permissions (Do NOT skip this)
    9) Reboot
    10) MOST IMPORTANT: Never install the update again!!
    Your bluetooth headset will work in skype after this. You will replace EVERY FILE THE MagicTrackpadMultiTouchUpd1.0.dmg package installed with one from the DVD. If you can not find it, the search bar in Pacifist works wonders.
    You will get an error if you try to reinstall admin.framework about not having permission to install. This will be the ONLY file you will not reinstall.
    Yes, you have more or less, in a very complicated fashion uninstalled the update (software update shows the Magic Touch update as needed afterwards).
    Find me on Skype, where I will be able to walk you through it from my Plantronics Voyager Pro bluetooth headset at james.t.bolin
    In case you developers want to know, I'll give you my play by play. After the installation of the update, it borked the bluetooth causing Skype to freeze. Reinstalling all the original kexts from the installer disk fixed the skype freezing issue, but there was still no audio. In fact, after reinstalling everything in the System>Library folder still left me with no audio, but it would not freeze or cause kernel panics at this point.
    This is where I got the magic. I started replacing stuff in the usr directory. Upon replacing the usr>libexec>cups>backend>bluetooth; usr>libexec>hidd; usr>sbin>blued; and the blue.8 and hidd.8 files, I got audio back and the stars aligned in perfect harmony. I suspect apple needs to retool the kexts and rewrite the root level profiles.

  • HP Laserjet m1214nfh MFP Doesn't work after firmware updating

    Hello
    HP Laserjet m1214nfh MFP (USB Connetcion).
    I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing"  and after some seconds LCD turns off and again prompts "Initializing".
    Please guide me.
    thank you

    Hi,
    Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
    If the same persists please contact HP support by following Technical support after you buy for your region below:
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Ipad apps wont work after downloading update 5.1.1

    My I pad apps wont work after I downloaded OS update 5.1.1
    I have tried restoring, but it doesn't solve the problem.

    Hi
    I had the same problem since I updated, the iPad shows "No Sim" I have taken it out, put it back in after cleaning it! All the usual possible solutions that everyone else has tried? So I have not been able to connect for over a week now and I intended to pop into the Apple geek guys to let them have a look, but was scared that they might suggest it would have to be sent away!!! What would I do?. So last night I was fiddling around with the IPad and thought I would try something, AND GUESS WHAT! It works!!!!
    This is what I had done
    1. Take the SIM out of the IPad
    2. Leaving the SIM out, turn the Ipad off using the Home and power button at the same time, do this 4 times
    3. Now insert the SIM back in it then found my SIM
    I cannot confirm the is the ultimate cure, but it worked for me and I have tried all the other possible solutions, it's worth a try?
    Barlow2012

  • The device mini iPad is not working  after the update of the system

    Hello,
    I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
    please replay me .
    Best,
    Mawaddah

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Special Keys(Ctrl-opt-esc) in Screen Share no longer working after latest update

    I typically remote into a machine back home through icloud once or twice a week to help my wife kill a program that can get stuck.  I used to be able to send command+opt+esc to get to the remote computers force quit applications window.  But now when I do that after the latest update, it only does it on my computer and no longer send the command to the remote screen share session.
    Anyone else experience this or have a fix?
    -Dan

    (A) Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.
    (B) Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

  • EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

    Hello Dear,
    I've using my Epson Stylus CX5600 for a  long time with OSX 10.7 Lion on my Mac.
    The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
    After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
    on my macbook doesn't works anymore
    I've re-installed a lot but when I try to print the sheets appears in blank
    The driver-version available in Mountain Lion is 1.5
    I guess this is the problem and need a urgent correction driver update
    I'm looking forward to the internet and Epsons websites but didn't find nothing,
    in Epson website doesn't
    Can you help me please?
    Thankyou

    Hi my friend,
    I've tryed Bonjour, but only works Windows to install a print for Mac.
    I need the opposite... print from Mac to Windows.
    Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
    I can't remember but I did this:
    1. In iMac System Preferences->Print&Fax->"+"
    2. In "Add Printer" click and Tool Bar->Customize Toolbar...
    3. Add "Advanced" to Tool Bar and click "Done"
    4. Click Advanced->Type->LPD/LPR Host or Printer
    5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
    6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
    I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
    Do you have any idea?
    Thank's again

  • HTML animation effects doesn't work after last update

    After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
    Various animated png in html project appears immediatly without shows transitions or deformations.
    I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
    I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
    A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
    The same animation made with Hedge produce more the 100MB folio.
    why new version of dps don't show my html anim correctly ? I hope adobe correct this proble. 

    We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
    Neil

  • RM 900 remote doesn't work after driver update

    Hi!
    After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
    I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
    Any clue how to make it work again?
    Using Windows XP SP3 and Audigy Platinum Ex.
    Thank you again in advance.
    PD: Excuse my poor english, it's not my nati've language.

    Hello Jashue67,
    Sorry to hear about all the trouble with the Apple TV.  It sounds like you have done a restore but need to pair your Apple TV remote at this point.  You can follow these steps to pair the remote:
    Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
    You can find the full article here:
    Apple TV: Pairing and unpairing the Apple Remote
    http://support.apple.com/kb/ht1555
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • N73: restore doesn't work after firmware update

    Hello!
    I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
    Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
    After the update I tried to restore the backup via the same app.
    Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
    Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
    Is there another solution that doesn't involve buying this 3rd party software?
    TIA

    The phone is working well...
    I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

Maybe you are looking for