Ipad doesnt work with WIFI

new Ipad 3 connects to wifi stays connected for about 3 to 15 minutes and then looses connection, constantly happens. other products connect just fine even both iphones on wifi stay connected
why cant apple fix this???? for me to take the device to them so they can replace for the second time invovles another 4 hour round trip and over 200km in the car.

MrLeman wrote:
they sure are but they'll blame your network now. they've turned a perfectly good device into a brick. they must have started employing the windows vista development team (bad move) ha ha, HR wouldnt have been that silly? would they?
Haha, could have been worse and employed staff from the Millenium Edition development team
Not sure what the answer is to your problem apart from suggesting a downgrade to iOS 5 - but that's not currently available because that would be too easy!
In the meantime I assume Apple are aware of these wifi issues and may well be bringing out an iOS 6 update, well enough people are posting on these official Apple discussion forums!
You could also make Apple aware of the wifi problems via their feedback link at: http://www.apple.com/feedback/ipad.html - Thanks JimHdk

Similar Messages

  • Apple shop changed my iphone 3gs today, got home and cannot join my wifi. both my mac and ipad is working on wifi. tried rebooting, resetting still doesnt hold the wifi, it's there for a sec then its not connected.help please?

    Hi,
    Apple shop exchanged my iphone 3gs today. got home but it doesnt pick up the wifi. first the correct supplier appears then it says not connected.
    both my mac and ipad is working on wifi (so did the previous phone) i ve tried rebooting, tried reset supplier...nothing works. can someone help please?
    thanks

    Yes, they should be able to verify that WiFi is working properly. If I just got a new phone & it didn't work perfectly, right out of the box, before I started restoring or whatever, I'd be right back where I got the phone.

  • Time capsule doesnt work with telia bredband no wifi

    Time capsule doesnt work with telia bredband no wifi.  Time capsule and its wifi worked in the beginning, but now it doesnt. I have tried everything without success.

    There is no question.. so if it is a statement of resignation.. then if under warranty and faulty Apple will fix it/replace it.. if not dead you will be given it back.
    Are you using Lion? If so did you download 5.6 airport utility?
    Plug the TC into a computer by ethernet.. hold in reset for 10sec.. and then redo the setup.
    Give TC and wireless short names and no spaces and no special characters.. lock the wireless to manual a/n-b/g and fix the channels.
    Then if it doesn't work most likely faulty. Otherwise it is just setup is wrong.

  • My bluetooth for ipad doesnt work

    My bluetooth for my 1st gen ipad doesnt work it searches, takes a while to find anything and then it says it cant connect. Any reasons or solutions to my problem same thing goes on for my iphone 3g and iphone 4 but im more worried for the ipad since its what i use more. ps no warranty because i

    Are you trying to tether? because that is supported over wifi. you can use icloud to get some data to sync. bump can also transfer certain data like contacts or photos.

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    Giancarlo Messalli wrote:
    1) are you sure a reset holding the reset button will not delete my data?
    Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
    For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
    2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
    Thank you again
    I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
    Here is the Apple info on reset.
    http://support.apple.com/kb/ht3728
    And here is the quote from the horse's mouth so to speak.
    Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

  • C3-00 Mail is not working with Wifi

    I have Nokia C3-00, Its good set but the problem appeared when i tried to use my office Wifi connection in my mobile. Email and communities are not working with Wifi while messenger and browsing is very good with Wifi. However i have used Mail option (gmail, hotmail, yahoo) with my mobile GPRS connection that is working fine but not with Wifi. GPRS is very costly and i want to use office Wifi with my mobile to use email application. Please help me out. Thanks Adnan 

    There was an issue with messaging in the original software on the C3, so make sure that you are up-to-date. To check your software version try *#0000#
    Latest software release for Nokia C3-00 is 08.63
    Your service provider may not have the latest nokia version available, but make sure you have the most recent you can get.
    Menu > Settings > Phone> Phone Updates > Downl. phone software

  • I book doesnt work with power cord only

    Hello. I was just using my ibook g4 and shut it down. When i tried to turn it back on it worked for about 5 minutes then it shut off. I tried taking out the battery and holding down the power button for 5 seconds among other things. I gave up and borrowed a friends battery, he has the same model as me and that battery doesnt work either. I tried just using the power cord only and that doesnt work either. Do i need to take it in to a professional? I've tried just about everything.

    Hey Caesar and Welcome to Apple Discussions,
    So your header reads:
    "i book doesnt work with power cord only "
    Is that right? Will it run only on the battery?
    If so this is from the manual:
    "The computer runs with battery, but not with the power adapter plugged into
    wall outlet
    1. Try known-good power outlet.
    2. Try known-good power adapter and power cord.
    Note:
    Verify that power adapter connector glows amber or green. If the power
    adapter light is green, turn over the computer and press the battery button. The
    battery lights should glow green and stay on if the power adapter is operating
    correctly.
    3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
    Warning: Make sure you do not hold down the "fn" key when resetting the
    power manager.
    Warning: Resetting the power manager means you will also need to reset the
    date and time (using the Date & Time control panel).
    4. Replace DC board.
    5. Replace logic board."
    and it would help to know exactly which iBook you have but this is pretty generic.
    Richard

  • Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remo

    Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
    business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
    The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
    the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
    If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil.

    "The Ipad is on a short cable to my projector."
    Get a longer cable?

  • Why does my ipad air work with my netgear routerWGT624

    why does my ipad air work with my netgear routerWGT 624

    Why wouldn't it work with that router?
    Or are you really asking why doesn't it work with that router? If that's your question try rebooting the router by powering it off for thirty seconds then turning it back on.
    If this doesn't help please explain in more detail what happens when your iPad attempt to connect to your Wi-Fi network.

  • Why is the fb video call doesnt work with macbook?

    why is the fb video call doesnt work with macbook?

    Hi
    Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
    Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
    The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
    Hope this helps.
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...
    Attachments:
    Polymorph.zip ‏14 KB

  • Seagate 1.5TB doesnt work with mac

    hi, i have a seagate external hard drive 1.5 TB, i generally use it for my windows laptop. now i bought a mac and it doesnt work with my mac. Am i doing some thing wrong..?

    Are you planning on using the drive with Windows? If no, then use Disk Utility in Applications/Utilities to reformat the drive. Formatting erases contents on a drive. Copy the data to another source before formatting.
    Format the external drive as Mac OS Extended (Journaled) - Partition Map Scheme: GUID
    Select Drive (top name) then click on Erase tab.
    Under Format select Mac OS Extended (Journaled)
    This should format as GUID when erasing but sometimes you need to click on an Advanced tab and select GUID.
    If you do plan on using the drive with Windows machine, format on Windows machine as exFAT.

  • Dear Friends...... I have an ipad 2 32gb with wifi and 3g enabled sim..... i bought it second hand .... and now if am going to download any games it is showing me an email id and asking for its password... please guide me how can i change this setting

    Dear Friends...... I have an ipad 2 32gb with wifi and 3g enabled sim..... i bought it second hand .... and now if am going to download any games it is showing me an email id and asking for its password... please guide me how can i change this setting to my email id and password

    Tap on the id in Settings > Store and log out of it and then login with your id. Any content already on the iPad will be tied to the previous owner's id and it can't be copied or transferred to your id - so it's probably best to do restore the iPad back to factory defaults and start as from new with it : Settings > General > Reset > Erase All Contents And Settings

  • HT5176 How can I make a call from my new iPad(3rd generation) with wifi+4G

    How can we make a call from iPad 3rd generation with wifi+4G?

    You cant "Call" anyone. Its not a phone. You can facetime other IOS users. Setup facetime with your apple id in ipad settings/facetime. You can also download apps like skype in the app store.

Maybe you are looking for

  • Possible to make embedded swf (in another swf) fill browser?

    I have an .swf which is set at 100x100 percent and fills the browser window. I have an embedded .swf within this .swf, and I would like to be able to have the embedded .swf fill the browser window and remain fluid (for different screen resolutions).

  • About tpbegin,need help!!!

    when i use tpbegin before call a remote service,what should i do to set the environment,and whether the database(Oracle) must support XA ? if i use transaction in my application,what should i do? environment£¿ ubbconfig£¿bdmconfig? or others fish

  • Curve 8310 and 8300 Calendar item not sync up to Exchange-Outllook

    Have 466 Blackberrys and a couple of them two executives one 8310 and one 8300 when calendar items are put on the device they will not sync up to Outlook.  We have BES 4.1.4.16 and the two Curves are unnint 4.4.4 software.  Mail works fine, Contacts

  • Converting RAW to jpg

    I have always used Elements 10 to convert RAW files to jpg by opening the RAW file in the editor, making changes, and then choosing Open Image tab, and then choosing jpg format in the drop down box to save it. For some reason it is no longer an optio

  • Why do i lose wallpaper when i switch form adm. to   standard in mavericks on my mac mini?

    When I switch from adm. to standard in Mavericks, I lose my wallpaper in standard. What can I do to correct this?