IPad dont start after empty battery!

I just forgot 2days ago to charge my ipad and today(2days after) Iconncted it wiith the charge.Fisrt it show the charge screen then the apple logo came. After 20 min. just showig logo the ipad crashes showes a second a blue screen and show the aple logo again.

First, make sure that it's got a good charge.  Use the charger that came with the iPad and give it four or five hours, preferably overnight.  Then post back with results.  If necessary, there are more steps to perform.

Similar Messages

  • My I Pad is not charging, it started after the battery went dead while i was playing a game, when i tried charging it all it does is flash the apple icon and it switches off again, help Pliiz

    my Ipad is not charging, it started after the battery died while i was playing a game, when i tried charging its only flashing the apple icon and it switches off again, help PLIIZ

    Not charging
    1. Reset iPad
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air or new paint brush

  • Ipad dont start

    Ipad dont start.What can I do?
    I try to restore but dont works

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Pictures missing in photo stream after empty-battery + work around

    I recently had a situation where synchronizing photos between my iOS7 and MacOS 10.9 devices failed and/or showed strange effects (individual pictures missing).
    After a day of annoying experiences I realised that the problems started after the iPhone (that I use for taking photos) had switched itself off due to an empty battery (there's just too much to see at the Carneval in Venice ;-) After fully charging the iPhone I took more photos but some (!) of the new photos (and some of the older photos) did not sync.
    WORK AROUND: restarted the iPhone once more.

    Summary
    Photo stream IS "Recently Added" as well as "Recently Taken" combined.  If it was taken with this phone, it can be favorited.  If not, there's no favorite (heart) icon.
    Details
    So I have 2 iphones I use, one for work, one personal.  I do very little with the work one and never had photo stream turned on but I use the same itunes account for both so I can share itunes match and photos and contacts if/when I chose to.
    I was confused about where photo stream went as well.
    So prior to turning on photo steam on my work phone, I saw that I had 4 photos (mostly screen shots) on the work phone, under "recently added".  I took a picture with the phone to be sure.  Yup, it was added to recently added but not "summarized" (not sure why it wasn't summarized but nothing else is on that phone).
    I have other settings to "default" including having "summarize photos" turned on.
    I then turned on "My Photo Stream" and saw photos start getting added to "Recently Added".  The count ended up being around 625 which is huge, but much less than the 1000 on my windows Photo Stream, and less than the 661 or so on my personal phone.  Not sure if this is the 30 days limitation on my personal or what the limitation is on my work phone.
    FYI, did all this with wifi so the download was moderately fast.
    Another thing of note.  Photos that were taken with the same phone have the favorite icon (the heart).  Photos taken on the other phone do not.  So that's how to tell if it's only on the photo stream.

  • Problem, radio dont starts after update to Mozilla Firefox 12

    I have problem with a radio in a website after the update of Mozilla Firefox 12 When i log in the webste the radio dont starts, when i use the Internet Explorer the radio starts. Check the picture
    http://img859.imageshack.us/img859/3150/egweggwe.png

    You're welcome

  • SUP 2.0 Installation problem -SUP services dont start after installation

    Hi,
    I have installed a licensed version of "SUP 2.0 Personal developer 32 bit" on my machine from https://sybase.subscribenet.com. I installed 4 RAR files (sup0200_dev1_win to sup0200_dev4_win) of around 1.66 GB. I have unzipped all the sub-folders inside after unzipping the 4 main RAR files.
    I followed the installation steps and installed all components on a single host.
    Everything was fine while installing but I am facing these problems:
    1. When I click Start > Programs > Sybase > Unwired Platform > Start Unwired Platform Services... nothing starts.
    2. When I open Sybase Unwired WorkSpace I dont see any "Start Development" or any "WorkSpace Navigator" or anything specific to SUP Workspace. Only specific to Eclipse is what I see.
    3. Most of the folders in the installed path is not there or are empty. For e.g. The folder Servers\MessagingServer\Data is empty.
    For another information I see some error in the installation log like:
    +(Nov 3, 2011 11:38:31 PM), , com.sybase.stf.install.uep.wizardaction.CopyInitConfigFiles, err, Could not copy directory D:\Sybase_Installables\sup0200_dev3_win\modules\mobileserver\syscheck to D:\Sybase\UnwiredPlatform\Util\syscheck ServiceException: (error code = -30000; message = "The system cannot find the path specified. (3)"; severity = 0)
    The strange thing is during installation the setup does not throw any error and I go to Finish the setup. Also I am able to successfully uninstal.
    Could anybody please guide me how what could be the problem. I suspect the installable is not appropriate.

    Hi
    Do you see the services as being installed?  What OS are you installing on? 
    I had to do a reinstall one time to get everything up and running, I also had the issue of the services not being properly installed (got a successful message after my first install but that in general seems to mean very little).  I then carefully went through the prerequisites again and on second try things worked correctly. 
    Bjorn

  • Phone Not Starting after the battery was drained

    My Phone's battery was drained and when connected to charge the phone it is not charging. I have kept it for hours but When I try to start my phone it does not do any thing. I am not sure if it is charging or not. Neither anything works please help me with this.

    When connected to a power source hold down both the volume up and power button for around 20 seconds then leave it for around 2 hours then check - If this fails then unfortunately your only options are to either return your device to the place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • MacBook Pro will not start after removing battery?

    My MacBook Pro has recently had a brand new battery put it, it's worked perfectly till now. My mouse was very loose so I decided to tighten it up. So I removed the battery, tightened the mouse and replaced the battery back (I've checked it's right) . However it now won't start up! At all, even when plugged into the mains. A faint flicking green light comes on the charger. Please help!
    MacBook Pro 13" 2010 mid (out of warranty) - Mac OS Lion

    Try this:
    PRAM/NVRAM Reset.
    http://support.apple.com/kb/HT1379
    good luck.....if all else fails, bring it to Apple and see what's going on with it.  Just don't let them know that you took the battery out.

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • My iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

    my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

    I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

    I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
    also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
    I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

  • Ipad won't start after updating to ios 8.1.3

    My iPad was working without issue prior to updating to IOS 8.1.3 yesterday. After updating, not only would the ipad not start, it produced intermittent tones. The tone heard when device is plugged into an outlet for charging.
    I attempted to turn the device off but it would not respond. Afterwards, a reboot was attempted numerous times by holding the home and sleep buttons down simultaneously. Once the Apple logo appeared the buttons were released, the logo disappeared but the device remained dormant.
    While connected to iTunes and emitting the connection tones, periodically the splash screen would appear momentarily then turn off. I was able to swipe the screen on one of these occasions. The device worked properly until it was turned off after use at which time it would not turn on again and remains unable to turn on. It does not respond to attempts to turn it off or rebooting.
    Prior to the update I did backup the device in case something like this would occur. Since I appear to have exhausted all my options to get the device to work, I feel the only remaining option is to restore it to factory default. I would appreciate advice from anyone who may either have experienced this same issue and found a resolution, or can provide thoughts on how I should proceed please.
    If I proceed with a restore to factory default followed by a restore of the most recent backup, will I lose any data during this process? This will be my first time to erase a device so any thoughts would be greatly appreciated. I would, of course, prefer an alternative resolution. Thanks in advance for your help.
    tony

    Hello, Tony.  
    Thank you for visiting Apple Support Communities.  
    I understand that your iPad no long starts after an update and you have a backup for your iPad.  It sounds like you will need to restore the device to factory and then will have the option to access your backup after the restore complete.  The only information that should be missing would be after the backup was completed until the device is restored.  I have included the steps for going through this process in the articles below.    
    If you can't update or restore your iPhone, iPad, or iPod touch
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
    -Jason H.  

  • Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2

    Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2

    If you are not using Cellular Data, turn it off.

  • The wrong name of the message sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

    When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

    Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
    At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
    I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
    Ciao,
    Antonio
    P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums.

  • "User" files in trash after I started to empty it.

    My computer has been acting strangely so I decided to empty the trash, I stopped the process when it showed over 16,000 files being deleted.  Now our user files (copies?) are in the trash, dated the exact time I started to empty.  Is this a virus?  What do I do?

    Is this a virus?
    Repeat after me:
    There are no viruses for Mac OS X. There are no viruses for Mac OS X. There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.There are no viruses for Mac OS X.

Maybe you are looking for

  • I opened my iPod nano 6g to fix the sleep button and now when i connect i get an error message, PLEASE help!!

    earlier i was bored and decided to open my iPod Nano 6th Generation to see if i could fix the broken sleep button, i think when i was removing the battery i might have beat it up a little, and idk if i did anything wrong to the logic board, now when

  • Using a library

    Have set up a library which has a spry horizontal menu. Whenever the library item is placed into a new form this is the result: <li><a href="/Library/index.html">Home</a></li> which really messes up all the links. Presently, I do a find and replace a

  • Problem with NotSerializableException on class implementing Serializable

    Hi, Any idea as to why I get this exception, and what I can do to avoid it ? java.io.NotSerializableException: util.NumberStore$UserI have this, relatively simple, class class User implements Serializable      private static long serialVersionUID = 1

  • Random javax.mail.FolderNotFoundException

    Hi all, we have a java application hosted on Win 2000 wich is using javamail api to interact with MS Exchange 2003. Basically is getting folders and iterating trough them. From time to time we get an error about javax.mail.FolderNotFoundException. Th

  • For those not getting the Activation Window in iTunes at all...I finally

    I went to the AT&T store as suggested in another thread by someone and got them to pop a new sim in it. Now, I am not sure if the guy left the sim in it, I like to think he did but he may have switched it back.. I know that is a big detail but that i