IPAD drill up/ down in performancepoint grid

Is it possible to drill up/ down in performancepoint grid on Ipad? If so, how?
Namnami

So do you have two different measures? If you had a single measure (population) the state would be a total of all cities.
Or, you only have one measure, and you're filtering out cities (or some 'other' value).
If you have two measures, then you could create a variable that displayed one or the other depending on the filter (drilling down creates a filter), which would solve your problem.

Similar Messages

Drill down in Second grid of planning book

Dear Team
I have created a planning book with two grids.
I want to enable drill down in second grid aswell.
How can I get it done? Also if I want different chars to be used in drill down for first grid and different for second, will it be possible.
I tried for following macro but it is not working -
Macro -
Where Z_PPL is a characateristic on which I want the drill down in Grid 2.
Regards

hello srinivas,
I already tried deleting the chars in the pivot sorting, by selecting that red line icon, etc.. but it never saves and reappears again. So i observed that superordinate settings for the pl book. So i am confused what are these superordinate settings. Any idea pls.
thx

TS3274 Ipad keeps shutting down when on the internet

When using Safari, Facebook or Pintrest my ipad shuts down and returns to the main page. I can tap Safari the page resumes but after a few min or so, sometimes just a few seconds it returns to the main page on my ipad. Any ideas on how to fix? Rebooted, have my debug set to on, updated ipad but it did not solve my problem.

Try closing all of your apps. If you are on ios 6, then double tap the home button and hold down one of the app icons until a - symbol appears, like if you want to move apps on your home screen. then close all of your apps. If you are on ios 7, then double tap the home button, and when the different app windows appear, swipe up on them to close them. Once you have done this restart your ipad by holding down the home button, and power button to turn it off. Then hold down the power button for 2 seconds to turn it back on.
I hope this helped!

Is there a way to force my iPad to shut down? I "slid" to turn off three hours ago. The "wheel" is still spinning in the middle of the screen.

Is there a way to force my iPad to shut down? I "slid" to turn off three hours ago. The "wheel" is still spinning in the middle of the screen.

Yeah, hold down the top Sleep button and the Home button simultaneously. Continue to hold until the screen goes blank and the Apple logo appears. Ignore the red slider midway through this process, just keep holding both buttons down until the Apple logo appears -- it takes about 8-10 seconds. That should do a soft reset and fix your problem.

My ITunes won't sync my ipad and closes down in the middle. I have Windows 7 Ultimate. How do I fix this problem?

My itunes won't sync my ipad and closes down in the middle of the attempted syn. I have windows 7 ultimate. Any ideas about what to do?

If the steps above do not resolve the issue, attempt to sync with iTunes while logged in as a new admin user. Follow these steps to create a new administrator user within Windows:
From the Start menu, choose Control Panel.
Open User Accounts.
Select Create a new account and follow the instructions to complete the account setup process.
Once the new account is created, choose Log Off from the Start menu.
Log in to the newly created user account.
If the error does occur in the new user account, the issue may be caused by content downloaded or created on the device, such as podcasts and voice memos. Removing content from the device may address the issue.
If the error does occur in the new user account, the issue may be caused by content downloaded or created on the device, such as podcasts and voice memos. Removing content from the device may address the issue.
If these steps do not work at all, I would suggest calling AppleCare at 1-800-275-2273 (assuming your iPad is stilll within support or has an AppleCare Protection Plan) and let them know you have already tried all troubleshooting steps per TS2830.

HT4061 my ipad automatically shut down and now i lost al savings and in-app purchases the battery was on 50% what happened and can i get my purchases back

my ipad automatically shut down and now i lost al savings and in-app purchases the battery was on 50% what happened and can i get my purchases back

Hi there,
This seems very frustrating. An iPad can shut down randomally for many reasons, just like a computer can crash. If it begins to happen regularly, then do contact Apple, but there are no signs that your iPad is malfunctioning from just one shut down like this.
But, you should be able to get all your in-app purchases back. In some apps, there is a 'restore purchases' button, which will download all the purchases you made for free.
In some cases, you can tap to make the purchase again, and it will be downloaded at no charge, however this does not happen with consumable items such as coins and credits.
I reccomend contacting iTunes Store Support at the link below, they will take a closer look at your purchases and give you further steps on redeeming them. They may also refund you if they have been lost.
iTunes Store Support
You can also contact the developer of the app, and report the crash and missing purchases. If you tell me the app, I'll give you the relevent contact in the developers.
Other than that, sorry for the problems, and have a great day,
Nathan

Do Not Expand on Drill Across/Down

Hi All,
I am having Two Restricted KeyFigures Called Short Term and Long Term. The Short term is restricted with Fiscal Month(Say X) for a range of one year and the Long term is restricted with the same variable but Greater than Or Equal X. So the Long term contains lots of Data as the infocube has the future data also.
Now the problem is when I do a Drill Across/Down on Fiscal Month the result exceeds the Microsoft Excel Limitations(Colunms 255).
Is there any way that Restricted KeyFigure ' Long term' should not expand when i do a drill across/down.that is how can i disable the drill across function on the Long Term Restricted key figure.
Your ideas will be appriciated with points.
Thanks

Hi,
Try this:
Take a Virtual hierarchy on Fiscal year/period characterstic (which you have taken in the free characterstic area). So it will avoid display of all Individual values at a time. User can drill down on the hierarchy , if he want to do it. That also, will alow to drill down for a specific year and not at a time all.
With rgds,
Anil Kumar Sharma .P

While drilling up/down the report, the results are displayed after delay

We have a WebI Report whose hierarchy is based on the time Year -> Quarter -> Month -> Day -> Hour -> 30 mins.
While drilling up/down the report, the results are displayed after much delay and most of the time, all / some of the values are displayed as "#REFRESH" or '##########'. However, if i refresh it, all the values are displayed.
What could be the cause for this issue? and how to troubleshoot it?
Thanks In Advance!!!

hi,
This error appears in cells due to smart measures when the value returned by the smart measure is not available. This occurs when the grouping set containing the value is not available with the data provider.
Remove the error by refreshing the data.
Regards,
Vamsee

My iPad is slowing down, how can I speed it up?

MY iPad is slowing down, how can I speed it up?

MY iPad is slowing down, how can I speed it up?

IPad notification pull-down doesn't respond to tapping notification

Whenever I turn on my iPad and pull down the bar to check notifications, I tap the notification and nothing happens. I have to tap it again to make it work. It seems it isn't responsive until like a second after the bar is done bouncing at the bottom; I have to just sit and wait rather than just tapping the notification once the bar hits the bottom or even before (like Android). It's not clear when I can actually tap the notification. Can't this be changed?

Nobody else has this problem? It's frustrating tapping the notification and nothing happens then having to tap it again or wait the exact unspecified amount of time required for it to be ready for you. This seems like babying the user to the point where it's annoying.

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

Hi Steve
worldweary wrote:
Thanks again. I tried channel 13 and it seemed to work better, with less dropouts (albeit not perfect) but sadly my slightly ageing laptop wouldn't recognise the network at all with the Hub set to that channel, so I had to switch it back to 11!
Will try the factory reset at some point to see if that improves things.
I have the same issue with my iPad when streaming videos...like the issue posted on ‎25-04-2014 18h36 by Steve.
Steve - Can you kinldy clarify how you resolved the problem finally.
I was infact planning to change the iPad or sell it off due to this recurring problem.
Thanks and regards
Siva

Why is it that every time I am doing something weather it's looking in the app store or using safari I iPad will close down and take me to my home screen? It gets very frustrating when you in the middle of something. I have checked for updates, none avai

None available. Any possible solution of what could be causing this issue. PLEASE HELP!!!!!!

Your iPad is as updated as it can be at 5.1.1. Your apps are crashing probably due to a lack of memory. Try keeping apps in the recents tray to a minimum. For starters close all apps completely, clear Safari and then reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Go to Settings>Safari>Clear History, Cookies and Data.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
See if this helps at all. If if does, remember to keep apps in the recents tray to a minimum. You shouldn't have to do that, but unfortunately, iOS 5.1.1 stretched the capability of the original iPad processor to its limits .... IMO!

How do I keep my iPad from shutting down?

How do I keep my iPad from shutting down?
LB

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

Ipad 1 slows down after installing IOS 5

Adter installing IOS 5 my Ipad 1 slows down considerably. Apps take time to start and especially the writing is so slow that I actually I cannot use the Pad anyomore. I udgraded only because I could not update imoorstant apps (keypad, pages) anymore with the old operating system. But this is no solution. Anyone elseexperiencing this problem or am I the only one?

it just doesn't work...
I used Pages and Keynote and Garageband extensively in ios4, with few problems. now, in ios5 they take quite literally several minutes to load, if they don't crash (usually a 50% chance).
I have been to my local Genius Bar and they suggested "restoring as new", as opposed to "restoring with backup". i took this advice, and did both (post ios5 upgrade) and performance is still just awful.
really loved this device up until now, and could even reliably use it for work. at the moment i have an expensive paperweight and am not at all pleased.
seems i have company here. are you listening apple?

My ipad just shuts down when playing word

my ipad just shuts down when playing words with friends, does anyone else have this problem?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

IPAD drill up/ down in performancepoint grid

Similar Messages

Maybe you are looking for