Ipad email html links

I created html page with links that poined to different div's, and send it to email as body.
I opened with IPAD email client. It shows correct info, but I have to click 2 times on tab(link) in order to work.
I am also using style sheet css file..

FWIW, i'm on iOS 4.3
i also noticed today that a bookmark i had saved to my home screen would not connect to the browswer. erased the bookmark, but still have the same issue in email/text HTML links.
i'm going to try the update to 4.3.1 when i get home, maybe that'll work.

Similar Messages

  • How to send HTML link in the email through BRFplus

    Hi All,
    I want to send an HTML link embedded into the email body , as shown below.
    Hello Friends,
    Please find below path for error occurred during triggering of materials.
    Http://documents/error/doc.htm
    Thanks & Regards
    Khushbu
    And when the user clicks on the HTML link , it should directly take user to the browser.
    Kindly suggest how to implement this functionality.
    Regards,
    Khushbu

    I have tried using HTML code for writing the email body, but its not working.Its not converting HTML code , its taking them as characters only.I know how pass HTML link in email from ABAP but here email are sent from SEND email action of BRFplus.

  • Html link to pdf works ok on mac but not on ipad. adobe reader for ipad downloaded.

    HTML link to pdf works ok on Mac but not on ipad. Adobe Reader for ipad downloaded. What's wrong?

    Hi pwillener,
    Thank for reply. The pdf’s are in a subfolder “PDF” of the folder holding the web page. The web page itself uses
    . This works in full size computer browsers but not in an iPad.
    My excursion through the search engine has produced the idea of adding #page = requesting page to the URL but I have not had time to try it perhaps without the = sign.
    Bryan

  • I clicked on an HTML link in email, could this cause my mac to be infected by a virus?

    I received an email from a friend which had a HTML link in it. I sometimes get these to display on a screen so it was not unusal so I clicked on the link.
    When the site loaded I realised that this had not been sent by my friend so I closed it.
    I've since found out that the friend had her email hacked allowing bogus emails to be sent.
    I'm new to Mac's but I've been told that they don't get virus.
    What is the risk of me opening the link?
    How do I check if I have a problem?
    Thanks.

    There is Mac malware out there, but just visiting a web page isn't enough to infect you.  See:
    http://www.reedcorner.net/guides/macvirus
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

  • TS3274 just bought ipad mini. As part of set up apple sent email with link  'Verify Now'. I've clicked it repeatedly but not responding. My email account is working fine. Any ideas?

    just bought ipad mini. As part of set up apple sent email with link  'Verify Now'. I've clicked it repeatedly but not responding. My email account is working fine. Any ideas?

    Why not just create an Apple ID for her and then you wont have any problems. Login on iMessage and Facetime using her ID and do the rest with your ID. It will work i tried it on my iPad

  • I reset my mums ipad and its linked to an apple id and the email adress to it no longer exist's

    i have reset my mums iPad and its linked to an apple Id and the email that she used she doesn't have no more

    Assuming that you are on the activation screen and can't remember the account's password, then have you tried getting the password reset via http://iforgot.apple.com (do you or your mother remember the answers to the account's security questions) ?
    If you can't get the password reset via that page then try contacting Support in your country, they should be able to reset the password.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

  • IPad wont open link in email

    http://click.icptrack.com/icp/relay.php?r%18240769&msgidC1346&act%EF%BF%BDFP&c%1 95062&destination=http%3A%2F%2Fwww.straightdope.com%2Fcolumns%2Fread%2F3046%2Fdo es-daylight-saving-time-increase-road-kill
    My MBP opens them fine.

    This is only caused by the iPad email client. The URL's first serialized parameter is somehow corrupted, after the ... relay.php?r should be an equal sign and some numbers. Not sure if this is base on the length of the URL, but the email client is messing with the parameters.

  • When i send a photo taken on ipad it appears upside down at addressees but fine on ipad email

    when i forward a photo taken on ipad it appears upside down to addressees but fine on my ipad email as a cc copy?

    Here are links to four short MOV files showing the four orientations for the iPhone 4S. I had to upload them to DropBox for you as all of my available Cloud based mail programs choked on saving or sending these little video files.
    http://dl.dropbox.com/u/7584570/IMG_0061.MOV
    http://dl.dropbox.com/u/7584570/IMG_0062.MOV
    http://dl.dropbox.com/u/7584570/IMG_0063.MOV
    http://dl.dropbox.com/u/7584570/IMG_0064.MOV
    I usually record hockey games in Landscape mode with the Home Button of the iPhone on the left side with the screen facing me. That is the mov file IMG_0063.MOV
    Apple's QuickTime Player displays it correctly, while the VLC player, which ignores exif flags plays it upside down. So does the Plex Media streamer ignore the flag, so does the thunderbird mail app ignore the flag, and so on. Adobe looks at the exif flags so they get it right.
    My movies are of four Post It Notes, each one describing the location of the Home Button. Take a series of four pictures oriented like my test MOV files , then take 4 short MOV files of the same iPhone orientation. If the results are "misoriented" then the software you are using to look at them is ignoring the orientation flages.
    For more detail of this subject look at  http://www.impulseadventure.com/photo/exif-orientation.html
    JPEG Rotation and EXIF Orientation
    Digital Cameras with orientation sensors allow auto-rotation of portrait images. Unfortunately, support for this feature is not widespread or consistently applied.
    Digital Cameras with Orientation Sensors
    Many newer digital cameras (both dSLR and Point & Shoot digicams) have a built-in orientation sensor. Virtually all Canon and Nikon digital cameras have an orientation sensor. The output of this sensor is used to set the EXIF orientation flag in the image file's metatdata to reflect the positioning of the camera with respect to the ground. Canon calls their sensor the "Intelligent Orientation" sensor. It is presumably a 2-axis tilt sensor, allowing 4 possible orientations to be detected (shown in the left side of the diagram in the link above).

  • HTML links in Vibe Feed and digest e-mails do not work on GW 8.0.3client

    I have GroupWise 8.0.3hp1 on NetWare 6.5.8 and a Vibe 3.3 install on
    SUSE 11 (the downloadable Vibe demo virtual machine from Novell's site).
    I have recently started upgrading GroupWise clients on Windows 7 PCs
    (64bit), and have been testing Vibe. I have run into a problem with
    HTML links in GW clients not working on PCs where the GW client has been
    upgraded.
    This problem occurs using the GroupWise 8.0.3hp2 and 8.0.3hp3 clients,
    but does not occur on a 8.0.2hp2 client, so it appears to be GroupWise
    client related. I haven't tested any other client versions.
    1. When using the GW 8.0.3 client, if I select any of the "Novell Vibe
    OnPrem", "Favorites", or "My Teams" folders, I can see the Vibe Feed
    display showing entries for sites I'm following. But clicking on the
    links in these entries does nothing, so I cannot use the Vibe Feed to go
    directly to files, profiles, etc. The same Vibe Feed links from the
    Vibe web browser interface or from a GW8.0.2hp2 client works fine.
    2. If I have e-mail digest notifications setup to let me know when
    changes are made to a folder or file in Vibe, the e-mails are delivered
    to me just fine. But once again, none of the links in the e-mails work
    when using the GW8.0.3 client. Clicking on them does nothing. If I
    look at the e-mail message source, I can copy-and-paste the URLs
    directly into a browser and they work fine, so the URLs themselves are
    correct. Again, these links work fine if I use the GroupWise WebAccess
    or a GW8.0.2hp2 client.
    Is the GW 8.0.3 client is blocking these HTML links? I receive no
    notification from the client asking whether to "unblock" any
    links/scripts/images when viewing messages with these Vibe links.
    Any suggestions for getting these to work on GW 8.0.3 client?
    Thanks,
    -Greg
    former e-mail for posting:
    [email protected]

    Greg,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • HTML Link to Product Revenue Detail Page

    I have a simple table report developed for the Product Revenue.
    Help me with either "Custom Text" using ActionLink or a HTML Link for navigating to Product Revenue Page.
    I tried following link
    http://"@[html]"<a target=_blank href=https://secure-ausomxafa.crmondemand.com/OnDemand/user/RevenueDetail?OMTHD=RevenueDetailNav&OMTGT=RevenueDetailForm&RevenueDetailForm.Id="@">"Click"
    Thanks
    Edited by: user648222 on Jan 22, 2009 7:54 PM

    Try this:
    'Product Detail'
    the product revenue needs the Opty ID to be passed into it. If this doesn't paste properly email me at alex.neill@{see profile} and I'll email it to you.
    cheers
    Alex

  • IPad Air open links in apps

    How to make the iPad open a link (from a website, from an email, from another app, from anywhere) in the correct app?
    i.e. open in Etsy, Pinterest, Instagram...

    Well, the way that I read it, it does answer the question, the OP talks about this occurring in apps as well.
    "Is there a way to make the iphone open links in their appropriate app instead of in the web browser. It drives me INSANE! I click on a groupon link in my email and I am sent to safari where I get a pop up that says "download the groupon app."  Same thing happens for many apps I use everyday.  The Iphone isn't smart enough to open the links in the appropriate app?"
    The feature has to be built into the app itself. At least that is what I get out of it, if I read the entire discussion all the way through. But I could be misinterpreting what is being stated.
    Sorry, I do no social networking at all, so I can't speak about that. Actually, I do use LinkedIn in a very limited fashion and when I accept an invitation from my email, It does tell me to get the app, but I can close that window and then LinkedIn opens in Safari and I don't need the app.
    That probably doesn't answer your question, but I did want to give it a try.
    Message was edited by: Demo

  • How to implement "Email this link to a friend"

    I'm developing a J2EE application in which I need to send links and the complete HTML pages (that a end user will see in the browser) to an email he specifies. I'd like to give a link "email this link to a friend" and "email this page to a friend". How do I achieve it?
    My question is specifially how to get the contents of a JSP/HTML page already rendered in the browser. I can go ahead and use Java Mail API or something similar.
    Thanks,

    My understanding is, using URL class may not work,
    since the required parameters are not submitted using
    GET method. I can get the URL without parameters and
    that may not give me the correct HTML page. Am I
    missing something?The example in the tutorial uses GET mode, I suppose. But the URL class does work perfectly well with POST mode, you just have to set up things correctly. (By the way, having a report as output from a POST mode form is an abuse of the HTTP protocol, as POST is supposed to be for updating the server and GET is for getting information, which is what a report is. But I suppose that you're stuck with this.) I don't have an example of this handy but I've seen examples on these forums often enough. Or you could use the Apache Commons HttpClient package which you can find out about here.

  • Tabbing issues - form fields and HTML links

    I have a few HTML links in the top of a page with a form starting half way down the page. When using the tab order, I am able to specify tab order no problem in the form fields but when previewing or using the PDF and tabbing through, the tab order gets thrown out of wack and jumps up to the HTML links from tab order, 1 -2 HTML - HTML - 3- 4- so on...  I am unable to scpecify a tab order for the HTML links as it gives no option. I have tried to send the text field to a back layer but it does nothing. Is there anything I can do to correct this?

    For many people submit by e-mail can never work, because their PC is
    not set up to send email. For example, countless millions use only
    Hotmail, Gmail, Yahoo or similar.
    It's also possible you set options (like "submit whole PDF") that
    don't work with the free Reader.
    It's best to think of "submit by e-mail" as something to help you in
    the prototyping before moving on to a proper web-based solution.
    Aandi Inston

  • Email HTML form as PDF

    I've spent 10+ hours researching this, and still can't come
    up with a good solution.
    Q: What's the BEST WAY to translate/convert/import/export
    from an HTML form input (PHP processor; i.e. text file) to either
    an HTML email or a PDF email?
    Online Application
    HELP!

    You cannot do a form in an HTML email that will be filled out
    in the email
    body and submitted. The best you can do is to email a PDF
    that gets
    printed, or email a link to the webpage.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "BeausMom" <[email protected]> wrote in
    message
    news:fe5hgk$bus$[email protected]..
    > It needs to LOOK like a form - rather than a list of
    input data.
    >
    > This is a new task for me, so I'm just looking for the
    simplest (and least
    > expensive) solution. What server side script generates
    an HTML email?
    >
    >

  • Send variable to Flash from HTML link

    Does anyone know if it's possible to include a variable in an
    html link <a> tag that can set a variable in Flash. I have
    used JavaScript to do this in the past but would prefer not to on
    this site. I also would prefer not have to use a server side script
    or xml, as all I want to do is set multiple links on one html page
    to open the same Flash movie on another html page, but make it go
    to a particular frame or load a particular external swf based on
    the link that was clicked. Thanks, JD

    You need to use them in the object and embed tags.
    Dan Mode
    --> Adobe Community Expert
    *Flash Helps*
    http://www.smithmediafusion.com/blog/?cat=11
    *THE online Radio*
    http://www.tornadostream.com
    *Must Read*
    http://www.smithmediafusion.com/blog
    "JDRives" <[email protected]> wrote in
    message
    news:efcb61$rkb$[email protected]..
    > Do I need to use Flash Vars in the object and embed code
    to load them in
    > or will they automatically be passed to the variable on
    the _root level of
    > the SWF file? Thanks for your quick reply, JD

Maybe you are looking for