IPad Email response streams in single line
My iPad email responses stream in a single line..forever. Not the normal paragraph format, which I had, and want back. I didn't change settings.Thanks
Message was edited by: ninabgirl
Hi,
Tap Settings / Mail, Contacts, and Calendars / Preview. Try 2 or 3 or more lines then reseting your iPad.
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
See if that makes a difference.
Carolyn
Similar Messages
-
Email response with changed subject line, disappears.
I "replied" to an email, but changed the subject line and then entered "send". The email disappeared. It did not appear in the sent folder. Was this because I changed the subject line?
Welcome to Discussions!
Check your Junk folder. Something about the email is probably making the junk filter think it's just junk. If it's in there, you can mark it 'not junk' to help the filter learn it's a valid email. -
Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.
For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better. -
Single line of text/email id to People or Group column
I have a list of employee details, along with their SharePoint email ID. I want to import this list along with a new People or Group column, where it reads the email id and picks the correct user from Active Directory. How to import this?
Hi Abul,
Based on your description, I did a test. When I used users' email address in excel table and imported it to SharePoint list, the column would be saved as Hyperlink or Picture type. If I used Domain\User, after importing it to SharePoint list, the column
would be saved as Single line of text type.
It seems that it only is converted into Single line of text or Hyperlink type when you import a table into SharePoint list, by default. There is not a way to convert the table column in excel file into People column in SharePoint list.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
How do I add mult emails in the same To: line field?
Hello, I'm running Thunderbird 31.5.0. I was previously able to send multiple emails in a single To: line field, but now the text turns red and it won't allow me to add contacts from my address book after the 1st contact was added. I figured out after one address is added, you need to press enter key and it creates a second To: field row below the 1st one. This new change isn't ideal and quite cumbersome. How can I go back to the original settings where I can continue to add mult emails in a single line? Thanks!
Red is just a stupid color who ever choose that should think again.
You can add more on the same line with a comma (, ) between each address.
If one entry in address-book has more than one address then you can put all in, they will be comma-separated.
Warning don't put 2 commas after each other.
"MoreFunctionsForAddressBook" can help you with "one entry-many addresses" -
Table borders in Dreamweaver cs4 design view too big, I would like to have a single line for tables
Hi All,
I design email templates using only tables but the design view options in cs4 only provide a huge 3px border in order to display the tables. In older versions of macromedia etc the table view is only 1px wide which makes designing a whole lot easier.
When I add tables within tables it adds more spacing and looks way off and it also looks off in browsers, causing me to have to increase and decrease padding sure this is no way to create table even if they have no borders and the table width is already fixed?
I have tried turning borders off in visual aids but there is no option to have just a single line to demonstrate a border!!
I can't work like this, can anybody help me or is this just the way borders are displayed in cs4 for the pc???Hi Guys, thanks for getting back to me.
the problem is purely about design view display and not about coding.
Below is how CS4 displays borders with two lines which I find difficult to decipher:
Then below is Macromedia DM 8 and this how I want the borders to look, with single lines to display the tables.
This may just be the way Abobe have decided to display tables in design view and there may not be any option to change it but if you know any way to change it I would be most greatful.
Thanks again.
G -
When i send a photo taken on ipad it appears upside down at addressees but fine on ipad email
when i forward a photo taken on ipad it appears upside down to addressees but fine on my ipad email as a cc copy?
Here are links to four short MOV files showing the four orientations for the iPhone 4S. I had to upload them to DropBox for you as all of my available Cloud based mail programs choked on saving or sending these little video files.
http://dl.dropbox.com/u/7584570/IMG_0061.MOV
http://dl.dropbox.com/u/7584570/IMG_0062.MOV
http://dl.dropbox.com/u/7584570/IMG_0063.MOV
http://dl.dropbox.com/u/7584570/IMG_0064.MOV
I usually record hockey games in Landscape mode with the Home Button of the iPhone on the left side with the screen facing me. That is the mov file IMG_0063.MOV
Apple's QuickTime Player displays it correctly, while the VLC player, which ignores exif flags plays it upside down. So does the Plex Media streamer ignore the flag, so does the thunderbird mail app ignore the flag, and so on. Adobe looks at the exif flags so they get it right.
My movies are of four Post It Notes, each one describing the location of the Home Button. Take a series of four pictures oriented like my test MOV files , then take 4 short MOV files of the same iPhone orientation. If the results are "misoriented" then the software you are using to look at them is ignoring the orientation flages.
For more detail of this subject look at http://www.impulseadventure.com/photo/exif-orientation.html
JPEG Rotation and EXIF Orientation
Digital Cameras with orientation sensors allow auto-rotation of portrait images. Unfortunately, support for this feature is not widespread or consistently applied.
Digital Cameras with Orientation Sensors
Many newer digital cameras (both dSLR and Point & Shoot digicams) have a built-in orientation sensor. Virtually all Canon and Nikon digital cameras have an orientation sensor. The output of this sensor is used to set the EXIF orientation flag in the image file's metatdata to reflect the positioning of the camera with respect to the ground. Canon calls their sensor the "Intelligent Orientation" sensor. It is presumably a 2-axis tilt sensor, allowing 4 possible orientations to be detected (shown in the left side of the diagram in the link above). -
Download created XML File in batch mode // Parse XML file into single lines
Hello!
I upload a CSV file and based on that CSV file I create an XML "object". First I uploaded and downloaded it via gui frontendclass, but as it has to be run in a batch in the night I need to upload and download the data via OPEN DATASET.
The import and transformation of the CSV file works fine, also the transfer into an itab with the same structure as a CSV line is ok. I also create the XML file, which could be downloaded easily with gui-download but it is not permittet.
Import of data: I scan the folder and get the filenames into a itab, I loop over that itab and read the single files like this:
OPEN DATASET ls_convert_batch FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CLEAR tab.
IF sy-subrc = 0.
DO.
READ DATASET ls_convert_batch INTO line.
IF sy-subrc <> 0.
EXIT.
ELSE.
CLEAR tmptab.
SPLIT line AT ';' INTO tmptab-product
tmptab-contract
tmptab-extagent.
APPEND tmptab TO tab.
ENDIF.
ENDDO.
ENDIF.
The XML file has a strucutre like
<file>
- <file formant_no="1.1" format_date="02.10.2003">
<status>V</status>
<number>001001025</numbner>
<name>Schmeisser,Christof</name>
- <details>
- <detail>
<contract>00000003494</contract>
<name>Schmeisser, Christof</name>
<invoice_no>000000003840</invoice_no>
<due_date>20100601</due_date>
<amount>140,00</amount>
</detail>
- <detail>
<contract>00000003495</contract>
<name>Schmeisser, Christof</name>
<invoice_no>000000003841</invoice_no>
<due_date>20100601</due_date>
<amount>130,00</amount>
</detail>
- </details>
<elements>2</elements>
<amount_overall>270</amount_overall>
</file>
At the moment I download it like this:
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = filename
filetype = 'BIN'
* CONFIRM_OVERWRITE = '0'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSEIF sy-subrc = 0.
lv_create_counter = lv_create_counter + 1.
ENDIF.
But I need to download it via OPEN TRANSFER CLOSE Dataset as it has to run in batch mode.
Anyone has an idea? I am really desperate here. One idea would be to parse the single lines into a string and then create the XML file line by line as text and save it with ending XML, should work. But I don't know how!
Thank you very much in advance,
kind regards from Tallinn, Estonia,
Christof!
Edited by: Christof Schmeisser on Nov 25, 2010 7:51 PM
I edited the heading, would be too general and missleading!Tipos Pools
TYPE-POOLS: ixml.
CLASS cl_ixml DEFINITION LOAD.
TYPES: BEGIN OF xml_node_type,
node TYPE char50,
vlnode TYPE string,
END OF xml_node_type,
BEGIN OF xml_line_type,
data(256) TYPE x,
END OF xml_line_type.
Tabelas Internas
DATA: ti_xml_node TYPE TABLE OF xml_node_type.
Variáveis TYPE REF
*Type REF para utilizar no XML
DATA: ixml_type TYPE REF TO if_ixml,
streamfactory_type TYPE REF TO if_ixml_stream_factory,
ostream_type TYPE REF TO if_ixml_ostream,
istream_type TYPE REF TO if_ixml_istream,
parser_type TYPE REF TO if_ixml_parser,
renderer_type TYPE REF TO if_ixml_renderer,
document_type TYPE REF TO if_ixml_document,
encoding_type TYPE REF TO if_ixml_encoding,
node_type TYPE REF TO if_ixml_node,
element_dtrans_type TYPE REF TO if_ixml_element,
element_xml_in_type TYPE REF TO if_ixml_element,
element_roteiros_type TYPE REF TO if_ixml_element,
element_roteiro_type TYPE REF TO if_ixml_element,
element_vias_type TYPE REF TO if_ixml_element,
element_via_type TYPE REF TO if_ixml_element,
element_dummy_type TYPE REF TO if_ixml_element,
gw_xml_node TYPE TABLE OF xml_node_type,
gw_xml_node_ret TYPE TABLE OF xml_node_type,
gw_xml_node_err TYPE TABLE OF xml_node_type,
gw_xml_node_xml TYPE TABLE OF xml_node_type,
gw_xml_table TYPE TABLE OF xml_line_type,
gw_xml_table2 TYPE TABLE OF xml_line_type,
gs_xml_node TYPE xml_node_type, "WA para leitura do xml
gs_xml_node_ret TYPE xml_node_type, "WA para leitura do xml retorno
gs_xml_node_err TYPE xml_node_type, "WA para leitura do xml erro
gs_xml_node_xml TYPE xml_node_type, "WA para leitura do xml info sucesso
gs_xml_table2 TYPE xml_line_type. "WA para importar xml
Variáveis do Programa
DATA: l_value TYPE string,
l_rc TYPE i,
l_xml_size TYPE i,
cod_cartaorepom TYPE char20 VALUE '123456789',
v_caminho_exp TYPE string VALUE 'C:TEMP',
v_salvaarquivo TYPE string,
v_nomearquivo TYPE string,
w_nodetext TYPE string,
v_roteiros TYPE string,
v_roteiro TYPE string,
v_roteiro_codigo TYPE string,
v_percurso_codigo TYPE string,
v_percurso_descricao TYPE string,
v_cidade_origem TYPE string,
v_estado_origem TYPE string,
v_cidade_destino TYPE string,
v_estado_destino TYPE string,
v_transporte_tipo TYPE string,
v_cartao_taxa TYPE string,
v_cobra_taxa TYPE string.
Constants
CONSTANTS: cc_39 TYPE string VALUE '39', " Numero 39.
cc_dt_trans TYPE string VALUE 'data_transfer'," document_type(name)
cc_metodo_cod TYPE string VALUE 'metodo_codigo'," document_type(name)
cc_xml_in TYPE string VALUE 'xml_in'," document_type(name)
cc_ct_tx_ativ TYPE string VALUE 'cartao_taxa_ativacao'," document_type(name)
cc_cartao TYPE string VALUE 'cartao', " Parâmetro Perform.
cc_xml TYPE string VALUE '.XML'," extenção
cc_bin TYPE char10 VALUE 'BIN'." filetype
START-OF-SELECTION.
PERFORM yf_inicia_criacao_xml USING cc_39.
element_roteiro_type = document_type->create_simple_element(
name = cc_ct_tx_ativ
parent = element_xml_in_type ).
PERFORM yf_dummy_roteiro USING cod_cartaorepom cc_cartao.
PERFORM yf_finaliza_xml.
PERFORM yf_exporta_xml USING v_caminho_exp.
PERFORM yf_convert_xml_to_itab TABLES gw_xml_node_ret
USING v_salvaarquivo.
END-OF-SELECTION.
*& Form yf_inicia_criacao_xml
text
-->VALUE(P_0783) text
FORM yf_inicia_criacao_xml USING value(p_0783).
DATA: s_encoding_type TYPE string VALUE 'ISO-8859-1'.
Cria o ixml factory
ixml_type = cl_ixml=>create( ).
*Cria o objeto com modelo
document_type = ixml_type->create_document( ).
*Cria o cabeçalho encoding="iso-8859-1"
encoding_type = ixml_type->create_encoding( byte_order = 0
character_set = s_encoding_type ).
*Cria o root "DATA_TRANSFER"
element_dtrans_type = document_type->create_simple_element(
name = cc_dt_trans
parent = document_type ).
*Cria o node "METODO_CODIGO" e preenche com um valor passado no L_VALUE
l_value = p_0783.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
name = cc_metodo_cod
value = l_value
parent = element_dtrans_type ).
*Cria o node "XML_IN"
element_xml_in_type = document_type->create_simple_element(
name = cc_xml_in
parent = element_dtrans_type ).
ENDFORM. " yf_inicia_criacao_xml
*& Form yf_dummy_roteiro
text
-->VALUE(P_0996) text
-->VALUE(P_0997) text
FORM yf_dummy_roteiro USING value(p_0996)
value(p_0997).
l_value = p_0996.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
name = p_0997
value = l_value
parent = element_roteiro_type ).
ENDFORM. " yf_dummy_roteiro
*& Form yf_finaliza_xml
text
FORM yf_finaliza_xml.
*Cria o stream factory
streamfactory_type = ixml_type->create_stream_factory( ).
*Conecta a internal table de XML com o stream factory
ostream_type = streamfactory_type->create_ostream_itable( table = gw_xml_table ).
CALL METHOD ostream_type->set_encoding
EXPORTING
encoding = encoding_type.
*Rendering the document
renderer_type = ixml_type->create_renderer( ostream = ostream_type
document = document_type ).
l_rc = renderer_type->render( ).
*Salva o documento XML
l_xml_size = ostream_type->get_num_written_raw( ).
ENDFORM. " yf_finaliza_xml
*& Form yf_exporta_xml
text
-->VALUE(P_0783) text
FORM yf_exporta_xml USING value(p_0783).
CONCATENATE cod_cartaorepom
sy-datum
sy-uzeit
cc_xml
INTO v_nomearquivo.
CONCATENATE p_0783
v_nomearquivo
INTO v_salvaarquivo.
TRANSLATE v_nomearquivo TO UPPER CASE.
*Exporta o XML
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = v_salvaarquivo
filetype = cc_bin
CHANGING
data_tab = gw_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc = 0.
PERFORM yf_sapgui_progress_indicator USING cc_msg_xml_ok.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " yf_exporta_xml
*& Form yf_convert_xml_to_itab
text
-->P_GW_XML_NODE_RET text
-->P_FILENAME text
FORM yf_convert_xml_to_itab TABLES p_gw_xml_node_ret LIKE gw_xml_node
USING p_filename.
DATA l_count.
ixml_type = cl_ixml=>create( ).
Now Create Stream Factory
streamfactory_type = ixml_type->create_stream_factory( ).
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = p_filename
filetype = cc_bin
IMPORTING
filelength = l_xml_size
CHANGING
data_tab = gw_xml_table2
EXCEPTIONS
OTHERS = 19.
IF sy-subrc = 0.
istream_type = streamfactory_type->create_istream_itable( table = gw_xml_table2
size = l_xml_size ).
document_type = ixml_type->create_document( ).
parser_type = ixml_type->create_parser( stream_factory = streamfactory_type
istream = istream_type
document = document_type ).
IF parser_type->parse( ) NE 0.
IF parser_type->num_errors( ) NE 0.
l_count = parser_type->num_errors( ).
ENDIF.
ENDIF.
CALL METHOD istream_type->close( ).
CLEAR istream_type.
node_type = document_type.
PERFORM yf_get_data USING node_type.
p_gw_xml_node_ret[] = gw_xml_node[].
CLEAR gw_xml_node[].
ENDIF.
ENDFORM. " yf_convert_xml_to_itab
*& Form yf_get_data
text
-->VALUE(X_NODE) text
FORM yf_get_data USING value(x_node) TYPE REF TO if_ixml_node.
DATA: indent TYPE i.
DATA: ptext TYPE REF TO if_ixml_text.
DATA: string TYPE string.
DATA: temp_string(100).
CASE x_node->get_type( ).
WHEN if_ixml_node=>co_node_element.
string = x_node->get_name( ).
w_nodetext = string.
CLEAR string.
string = x_node->get_value( ).
IF NOT w_nodetext IS INITIAL OR
NOT string IS INITIAL.
gs_xml_node-node = w_nodetext.
gs_xml_node-vlnode = string.
IF NOT gs_xml_node-vlnode IS INITIAL.
APPEND gs_xml_node TO gw_xml_node.
CLEAR gs_xml_node.
ENDIF.
ENDIF.
ENDCASE.
Get the next child
x_node = x_node->get_first_child( ).
Recurse
WHILE NOT x_node IS INITIAL.
PERFORM yf_get_data USING x_node.
x_node = x_node->get_next( ).
ENDWHILE.
ENDFORM. "yf_get_data -
Adding Amount field in BSEG table and display it single line item?
hi experts,
I am doing credit / debit form now my requirement is
According to BELNR , GJAHR,BUKRS i want to find credit amount for this selection cretiria.
so i want to add all the lines of amount filed for a particular BELNR and display it as single line.
so i am getting data from print program like this
SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS: p_belnr LIKE bkpf-belnr OBLIGATORY,
p_bukrs LIKE bkpf-bukrs OBLIGATORY,
p_gjahr LIKE bkpf-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b0.
SELECT SINGLE *
FROM bkpf
INTO i_bkpf
WHERE belnr = p_belnr
AND ( blart = 'DG' OR blart = 'ZG' )
AND bukrs = p_bukrs
AND gjahr = p_gjahr.
IF sy-subrc = 0.
SELECT *
FROM bseg
INTO table it_bseg
WHERE belnr = i_bkpf-belnr .
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_CREDIT_DEBIT' " p_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = v_form_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
i_bkpf = i_bkpf
i_bseg = i_bseg
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so my I_BSEG containing all line items of particular BELNR . with the field SHKZG iam getting only credit line items .
now i want to do is add all credited amount and display like this in a table.
against ref# (BSEG-REBZG) ! details (BSEG-SGTXT)! amount
124569 10%discount 950.00(total amount ie sum of all lines amount for a BELNR)
10.00(total tax amt ie sum of all lines of tax amount for a BELNR)
960.00hi arun,
i used collect in smartform my procedure is like this .
i am getting data into i_BSEG because i declared like this in TABLES parameter
i created a loop .
in that i mentioned like I_BSEG into WA_BSEG.
then i created a program lines here i mentioned like this.
COLLECT WA_BSEG INTO IT_BSEG.
but because of BUZEI "Number of Line Item Within Accounting Document .it is not same it is varying for every credited time that means for every line of BELNR. thats why it is not adding it is just appending .
so pls tell me any other chance to find sum .
because i want to sum up all credted amount and display it in single line
ie first column REBZG "Number of the Invoice the Transaction Belongs to(against ref) i want to display once .
And Second column SGTXT "item text(details) for amount once and for tax amount once
And Third column Amount first line consists total amount & second line consists total for tax amount
regards,
satheesh.
[email protected]
any doubts chat me regarding this post. -
Hello
Perhaps this is just me but the new $45 single line plan seems like a good deal, relatively speaking, when you compare it to the other major providers and realize the consistency of the Verizon Wireless network. However, this plan is for new customers only and is a single line plan with 250 MB of data. However, when you look at it in a different light it is also a slap in the face to existing customers on the share everything plan. I will use my account as an example.
We are a very light data use family and our four iPhone Family exists on 1GB of data (no data overages). So we pay $160 for all phones + $50 for the 1GB of data. After my employer discount our final pre-tax/surcharge bill is $201.50. That being said if each phone was on this $45 single line plane we would have a pre-tax/surcharge cost of $180 ($21.50 less than current share everything price), and we'd still have basically the same total amount of data, though each phone would be limited to 250MB of data rather than share a pool of 1GB, but since none of our phone have exceed 250MB we'd be likely not run into overage issues.
Sounds great so I should switch all of our phones over to this $45 single line plan, right? Well the plan is for new customers only, so not an option. But the bigger point is this. Verizon just in effect dropped the price of 1GB of data to $20. So, for a similar low use data family such as mine, they will pay $180 for the same unlimited calling, unlimited texts, and 1GB of total data, but my family who has been with Verizon for several years have to pay $201.50 for is basically the same plan except that we can share our 1GB data allowance among our four phones. At that rate a family with 8 smartphones that use up to 250MB each would still be saving money by placing each phone on the single line plan. I thought family/share plans were supposed to save groups money because it ties more individuals to Verizon.
I know that most are not like my family and make use of more data than us. So for example, a family of two, currently on share everything 2GB allowance will have a pre-tax/surcharge cost of $140, but if each line was on the new $60 single line plan that comes with 1GB of data they would have a bill of $120 and they'd pay $20 less than the share everything plan they are on now. However, again this new $60 single line plan is for new customers only, according to the sales person I spoke to the other day.
I am not complaining about the service I receive when using my phone its great and I get service almost everywhere I go, even when camping. I am not complaining about the customer service I receive, because I always have a good experience when I call to speak to a customer service agent. I am not complaining about the subsidized phones I have had over the years, I don't mind the contract that ensures Verizon will recoup the cost of my phone (the phone Verizon paid apple for up front on my behalf). What I am complaining about is the fact that in response to other recent price changes by the other carriers, Verizon made some slight price changes but made these lower prices only available to new customers. In essence Verizon is basically saying, Hey existing customers you have to pay more for your data and services but new customers get to pay less so that we can lure them away from T-mobile, sprint and AT&T. So anyway just my 2 cents (or in this case several dollars) worth as it relates to Verizon's new single line plans relative to the share everything plans. Please feel free to comment and add your thoughts. If a Verizon rep wants to give me the additional $30 off on my family's 1GB data allowance I will take it and be very happy.
BryanI disagree. You can't make judgements about people that you don't know and I have every right to DEMAND excellent Customer Service. . I have been assisted by some very helpful Verizon Customer Service representatives over the 12 years that I have given them my business. However, I have had some very bad ones too especially in their stores. I learned years ago that I could get the best CS by phone and later by using their chat system wen it
came online. Yesterday's experience was horrible in every way though.
I did not fully elaborate yesterday so let me do so now. Before I called Verizon CS, I used their chat system as I always do. The person I chatted
with actually tried to get me to take a $60 per month plan with a ONE YEAR COMMITMENT. I could not believe what I was hearing (reading actually). I
mean really, I could have taken their prepaid plan with NO COMMITMENT and that would have made more sense. I repeatedly asked for the $45 per month plant but was told it would not suit my needs. Then, I was forced to call Verizon where I was told by another CS person that then plan I wanted did
not exist. I still can't get over a CUSTOMER RETENTION SPECIALIST not knowing the services that its company offers. That is inexcusable.
Actually, her manager should be fired for not making sure his/her employees are knowledgeable. Anyway, she tried to shove different plans down my
throat until she finally realized that I knew what I was talking about. Perhaps that is the plan along, you call to get a lower rate and they tell
you it doesn't exist. Then, they offer you all these other plans that might save you a little but give you so much more. Hmm, I may be onto something
there, sounds like Bait and Switch to me. How about you?
This latest adventure has left a bad taste in my mouth. Sure, I have a $45 (before taxes and fees) per month plan now BUT I could have had that long
ago if I switched to another carrier. True, my service might not be as good as with Verizon but my Verizon service isn't that great in my house anyway.
Many of the other carriers don't charge taxes and fees either so their $45 per month plan truly is $45 per month. I will wait anxiously too see what
my final monthly cost will be. Funny, my Customer Retention expert could not tell me what the monthly rate was with taxes and fees included. How can
you not know that?
As a developer who also codes for iOS and Android, I have several different ones laying around for testing. This weekend, I am going to activate one on
T-Moblie and one on Straight Talk and see how the service compares to Verizon. If neither is comparable, I will look at AT&T. I have their
U-Verse service and love the CS I get from them. I may even get a discount for bundling. Either way I am ending my long relationship with Verizon as
soon as I find a replacement.
I apologize for turning this thread into a rant but at the very least I feel purged by getting it out there. -
Trouble with auto size text in a single line form field
Hi. I'm having an issue with filling out a form in Adobe Reader on my iPad. The text field is single line. The font is set to "auto" so that the line of text will not exceed a certain width. When filling out this form on my laptop using Adobe Reader, it works fine. As I type additional text, once the field is filled, it shrinks the text font size. On my iPad, however, it won't let me type any more text in the field once I reach the end. Does Adobe Reader for iPad not support the "auto" font size in form fields? And I did check that my version of Adobe Reader is up to date on my iPad, so I do have the latest version.
Thanks in advance for your help,
AshleyActually, nevermind. It must be something wrong with the file. I tried opening another file and auto resize worked perfectly on it. Weird though that it works on one file and not another.
Thanks!
Ashley -
How to validate for non-english character on a single line text field
In a "Single Line Text" field we would like to allow the users to enter alpha numeric values only. We should show error when the user enter non-English values like
carácter
Vijayaragavan, MCTSHi,
According to your post, my understanding is that you wanted to validate for non-english character on a single line text field.
I recommend to use jQuery to attach regular expression validation. Please refer to:
Using #jQuery to attach regular expression validation to a #SharePoint list form field
In addition, for custom validations you can create your own Types. Refer to
this[^] for creating custom field type
More information:
SharePoint Custom Field - Regex Validator
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Hello there,
basically, as the title says: We have a Document Library on a Sharepoint 2013. Attached to every document are multiple columns, the type for every column is 'Single line of text'.
One column is called 'billing date' and has suitable data in it, e.g. 01.01.2015, 26.02.2015, 29.03.2015 an so on.
Sometimes when someone is editing an other column of the same document the data in 'billing date' changes from 01.01.2015 to 2015-01-01T00:00:00Z for that document, seemingly randomly.
Is there any way to configure or prevent this?
Thanks in advance and kind regards,
MichaelHi,
From your description, my understanding is that SharePoint changes the format of date in single line.
It is very strange issue. I try to reproduce your issue in my environment, but everything is OK.
To solve your issue, I need to collect some information, please confirm these points below:
When will the format of date change? Does it change immediately when you edit the document or after clicking save button?
Does the issue occur in this document library or each one in your environment?
Do you have some special configurations for this document library?
In addition, could you provide a screenshot as below?
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
My email consistently is seen by my recipients in a long line, without word wrap. How can I change this? I'm using Yahoo, but it doesn't happen with any other mail client beyond my ipad.
Yes, and here we are 7 months later still looking totally stupid when we send emails with lines that don't wrap to fit the window (like it just did here). I saw this happen with a friends iPad and we spent hours looking to turn on word wrap, which has been a minimum standard since the 1980's. I assumed this would have been fixed by the time I bought this iPad2 but NO. It is truly an UGLY fact that Apple can produce elegant devices that don't have the basic minimum programming to make them work properly. I am so angry that I bought an Android phone instead because it word wraps emails beautifully and instantly reformists to wide or narrow screen. Conversely, if I type an iPad email and the line continues beyond the edge of the window the type is made smaller and smaller the longer the line gets. The reply to my email showed that my type size was about 2 points in height and looked like unreadable ants on the screen. Wake up Apple, Linux is going to Eat Your Lunch if some Smart programming isn't applied to your devices!
-
HTTP Receiver Adapter payload as single line plain text with out any tags.
Hi PI experts,
I have a strange problem in http receiver adapter.
Sender RFC (SAP) Receiver: HTTP.
Receiver system expects the output from XI in the below format in a single line plain text with out any tags in the payload. and the content type should be application/x-www-form-urlencoded
Group=Test&Sentinel=Web%20Server&Facility=5345&Order Number=XT-XWHM-Y-NA&Serial Number=123456&@LABEL_QUANTITY=5&@LABEL_NAME=111114_Q
Is there any way to achieve this using http receiver adapter. Business is not ready to accept the output from XI not even in a single element instead they only need it as a JUST a plain text.
Appreciate early response on this.
Thanks in Advance,
JitenderDear Ola,
Could you elaborate how you achieved in catching the response data from the receiver in case of HTTP receiver adapter?
The target service is not a WebService but some python script that must to receive some paramters via POST request.
HOW can I post this parameters?
Here you entered the fields of the message type of the request in the header parameters of the receiver adapter? Thats fine.
But what about the message type and vice versa of the response from the receiver?
Regards
Rebecca
Maybe you are looking for
-
I set up the VPN, so how do access server at work?
I am a complete novice when it comes to VPNs. I was given permission to work from home and was told I had to set up a VPN to access shared documents saved on the server. I have a PC at work and a MacBook Pro at home, and my work IT department had n
-
HT201270 lost my contacts on my phone,,,how do i use the icloud to restore my contacts on my phone
lost my contacts on my phone... how do i use the icloud to restore my contacts on my phone
-
How to configure network printer with Linksys WRT54GL router network
I just bought a Linksys WRT54GL router and I am planning to build the following home-network around it: 1. A desktop computer connected to router via ethernet cable (hard-wired). 2. An HP Network Printer (Color LaserJet CM1312 MFP) connected to route
-
Itunes stops working when transferring purchases from ipad air
Everytime I connect my Ipad Air to itunes, it crashes after it tries to transfer my purchases. I have deleted itunes and re-installed it 3 times. It still does not work. Please help.
-
Hi, I have say 4 jsp pages. One page (A.jsp) is sort of a controller. It defines different kinds of variables. The other 3 jsp pages (say B, C, D) are included in between the code in A.jsp (using @include file..) depending upon some kind of condition