Ipad error usb device not recognized

I can hook up my Itouch to computer and Itunes, I have the latest Itunes updates. Turned off both systems and still get error message. Go to device manager and puts it as a mass storage device and it needs software to continue. This is Ipad 1.

Try to put the devices into Recovery, Note:This Will Erase all the devices data; Power down the device, hold the devices home key will plugging into itunes, then go to device and click restore.
Hope this works

Similar Messages

  • IPad I: USB Device Not Recognized

    My iPad is not recognized by my computer (USB Device Not Recognized) or iTunes.  The cable works fine and all other iPods are recognized.  I can't update my iPad or sync.  I have tried uninstalling/reinstalling/verifying other components etc...everything that I can find recommended for this type of issue.  Are there any other possible alternatives or could this be an inner component of the iPad that requires repair?  Naturally, this occurred after the warranty expired.  Any help will be appreciated.

    Most USB ports n computers do not provide enough power to charge an iPad. You need to use the wall charger and plug that into a known good wall outlet.
    The iPad will not show up on your computer like a hard drive. Start iTunes on your computer and plug your iPad into the USB port on the computer. You should see the iPad recognized in iTunes.

  • IPad mini USB device not recognized

    Trying to get my laptop pc with Windows 7 to recognize my iPad mini on iTunes v11.  Actually, trying to get it recognized by my pc at all.  It shows up as an Unkown Device when i plug it in, as well as in my Device Manager.  I've gone through Apple's online Troubleshooting guide (http://support.apple.com/kb/TS1538), but when I click Hardware IDs in the Devices tab as requested, it shows up as Unrecognized (USB/UNKNOWN) still -- the Troubleshooting guide does not adress this scenario.  I've been connecting it to several funcitoning USB ports (that recognize my iPhone 4S just fine) via the "lighting" cable that came with the iPad mini, with the same result.
    This is a very simple Windows 7 laptop so it strikes me as very odd that this wouldn't work simply.  I've checked around the net and seen people with similar dilemmas without any known solution yet, as far as I can tell.  Please advise, Thanks.

    I tried the method mentioned and it didn't resolve my problem.
    After much frustration, I opened Device Manager on my PC with my iPad Mini conected in one USB Port, I located it as Another Device (Not Recognized) / iPad. Double Clicked iPad and manually Reinstall the Driver.
    It wasn't recognized as Apple Mobile Device in Universal Serial Bus Controllers before.

  • B500 USB Device not recognized error at startup + sound issue Dissapointed

    Hello,
    We have 2 B500,
    whenever i start them, after windows load they are giving me an error, "USB device not recognized" I am not sure what to do any help will be greatly appreciated as this is strange that both the machines are giving the same error,
    also on one of the machines the sound does not come work, i have tried to trouble shoot, the diagnosis says speakers are working fine, but sound does not come out at all.
    I am kind of dissapointed with these issues, we always use to buy from Dell but we thought we would give Lenovo a chance, the machines were barely a couple of months old when the issue started,
    any advice please?
    Solved!
    Go to Solution.

    Well being that it is the same PC as the other I am sure the speakers are plugged into the correct spot. Have you checked the speakers with other devices to make sure the speaker is fine? Since the other PC's drivers are working, you can use DRIVERMAX to pull the sound driver from the good PC and also use DRIVERMAX to install the driver you pulled from the good one. Just uninstall the sound drivers from the bad PC first before installing the new driver.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • USB Device Not Recognized

    Operating system:  Windows Vista
    Error:  USB Device not recognized
    While actively on the computer, we suddenly got a message stating that the USB Device was not recognized.  The only thing plugged in to the USB port was a mouse.  Tried all the ports, same message.  Tried another mouse, same thing.  Tried a thumb drive, and low and behold, 2 of the 3 USB ports worked.  Tried a URL from MS which is supposed to help with this exact problem and possibly fix it:  http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices 
    This didn't work.
    Contacted HP support and they wanted me to restore back to a restore point as well as updating my BIOS.  After searching the issue more extensively using Google, I found that several people said to do this:
    Shut down the computer
    Remove the power plug
    Remove the battery
    Put the battery back in
    Power up the computer (without the power plug)
    This forces a hard reset.
    Almost as if by magic, the problem disappeared.  A much simpler and less technical solution to the problem than what HP recommended!!!!

    Hi @yani1015,
    Welcome to the HP Support Forums! I see when you were installing your HP Printer you got a message on your Computer saying 'USB Device not Recognized.' To better assist you can you leave me with the following information:
    1. What is the Exact model of HP Printer you are using?
    2. What is your current Operating system, Windows or Mac and which version?
    3. Were you able to install the printer?
    4. Did you plug in the USB prior to the software prompting you to?
    Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know what the PSDR finds, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    Try leaving it plugged in and then restart the computer.
    If you are on Windows this link may help but it is a bit old.
    http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

  • USB Device Not Recognized when Iphone connected to PC

    Hello,
    Every time I connect my Iphone 4S to my PC I get the error "USB Device Not Recognized". I did not have this problem before. I tried uninstalling Itunes and all its components and reninstalling it, restaring my computer, restarting Iphone and I even reset all the setting on my Iphone. I connected my wife's Iphone 4 using the same cable and PC and connected and started syncing with Itunes right away. If anyone has any pointers on how to fix this problem, any help will be much appreciated.

    try reseting the phone
    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • USB device not recognized for iphone

    My iphone 4S had an issue and was sent away for repair and in the end it was replaced. I backed all my Apps up to ITunes before sending it away.
    I tried plugging my new Iphone into my laptop and it comes up with the error "USB device not recognized", although it worked fine before I sent the phone away.
    I went to my device manager and found the device, however it says Unknown device and when I try to update it is says that this is the most up to date version.
    I uninstalled ITunes and reinstalled it which made no difference. ITunes also does not find the phone.
    I also removed all the Apple programs on my laptop and then tried to connect the phone again but this made no difference.
    I have restarted the laptop and this also made no difference.
    I called the Apple help line and they can not work it out and suggest I take the phone back to the shop to be checked.
    Does anyone have any other suggestions?

    DId you uninstall iTunes and all it's components? Or just the iTunes program?  Apple Mobile Device would be the main cause more than likely. So it is important whether you uninstalled all the programs or just iTunes. If so what I would try next is putting the device into recovery mode and seeing if it detects it like that.

  • TS1538 iphone 4s USB device not recognized

    I've not had any issues until now.  I'm on a 64bit Windows 7 PC.  Iphone 4s. Recently transfered pictures from the phone to the pc.  After that time it will not recognize the iphone at all.  I get the error "USB device not recognized."  I followed the article listed here: http://support.apple.com/kb/TS1538  but it's still not working.  I have done a soft reset on the phone and a hard reset, no dice.  The phone connects fine to any other computer except this one.  I have also attempted to delete all device drivers and reinstalled them to no avail.  Please help!

    Hi and thanks for replying.
    Yeah I have gone through that help article and unfortunately nothings worked. It just seems odd that the computer would recognise it in some way but not properly, which made me think it might be to do with software rather than hardware, but I see your point in that it probably is a hardware issue. I would have liked to get a newer one however I am already in a contract which I don't have the money to cancel and I managed to get the 2g very cheap. It would be fantastic if I could get this one going!
    Thanks a lot

  • USB device not recognized-iPhone

    Hi,
    When i connect my iPhone to my laptop results in poping up a error 'USB device not recognized'.
    I tried it with different cables to different systems( desktop/laptops) still getting the same error.
    Can any body tell me whats the issue with the iPhone? Is there any fix for this?
    Awaiting for your response ASAP?
    Thanks in advance.
    Rgds,
    Sachin

    General troubleshooting for your phone not recognized in Windows can be found here: http://support.apple.com/kb/TS1495
    Start with checking Apple Mobile Device Service: http://support.apple.com/kb/TS1567

  • TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

    Hello!
    I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
    I could really use some help solving this.
    I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
    Help a brother out, will you???

    Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
    It was for an IPOD so you can see those details in the link.
    Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
    - Turn off computer.
    - Plug Shuffle into usb.
    - Then you must reset your shuffle
    To reset iPod shuffle:
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
    - Start computer and it should install the usb driver for the ipod automatically.
    - Your i pod will say do not unplug so don't. then open itunes and it will be there.
    I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
    Just remember to not only eject ipod from itunes but stop usb.
    Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
    Stop it and select "apple ipod".

  • "USB Device Not Recognized" error when I connect iPod to my PC

    I have a brand new 5th gen (I think) iPod.
    I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
    Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
    I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
    Can anyone suggest anything ?
    I've tried the 5R's as far as I can, and I read through this thread:
    http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
    but there didn't seem to be anything conclusive.
    Thanks for any help,
    Jill

    First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
    Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

  • My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

    My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

    Work through all the suggestions in this Apple support document first.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What should I do?

    I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What do I do?

    Is the iPod Touch specifically stated as being compatible?  Have you tried to perfrom a hard reset of the iPod with it still connected?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • My ipad is not connecting the computer when i plug in, USB device not recognized pops up.  I uninstalled and reinstalled itunes without any improvement.

    I cannot get my ipad to sync with the computer, the message USB device not recognized keeps popping up. I've uninstalled and reinstalled itunes without an improvement.

    Do you have firewall or anti-virus software running?  If you do, it helps to turn it off.  Otherwise, click on this link and see if it helps:  http://www.apple.com/support/ipad/assistant/itunes/

Maybe you are looking for

  • How to create a report region which the first colomn is row selector column

    I want to create a report region and its first column is a row selector column. I have used select sentence to select some columns. But I do not know how set the first column to row selector column. I mean I want to do as follow. When a radio which i

  • My Apple TV is not recognized in iTunes

    I cannot get AirPlay to work with my AppleTV in iTunes.  I recently installed a new Time Machine and then reset my AirPort Express so that it could be used as an extension of my network.  The Airport Express is recognized in iTunes, but the Apple TV

  • Problem printing labels on dot-matrix printer

    I am currently using Oracle Reports v 3.0 on an NT network. I need to print labels on an Epson LQ-570+ printer. The user will run a number of reports which will create a file for each location we need to send to. The user will then send 10 - 20 files

  • Illustrator CS4 - Saving Buttons Created in Illustrator CS4

    How do I save a created button in Illustrator cs4 without the whole page - just the button - it was straightforward in illustrator CS3.

  • Entry in field KPOSN (item) in table KONV

    Hi All I observed that sometimes for the field KPOSN in the table KONV against a PO :- 1. There is blank entry, 2. Sometimes line item no is updated (i.e. 10, 20 etc) 3. Sometime both blank entry and line item is updated. I want to know under what co